LOKLNEYK Universal TV Bracket Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your LOKLNEYK Universal TV Bracket, Model liangwei 90. This low-profile wall mount is designed for most 14-60 inch flat or curved TVs with a maximum VESA compatibility of 200x200mm and a maximum load capacity of 40kg.

Please read this manual thoroughly before installation and retain it for future reference. Ensure all components are present and undamaged before proceeding.

2. Safety Information

WARNING: Improper installation may result in serious personal injury or damage to your TV and property. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Do not exceed the maximum load capacity of 40kg (88 lbs).
• Ensure the wall structure can safely support the combined weight of the mount and your TV.
• Always use a stud finder to locate wall studs for secure mounting. If mounting to concrete or brick, use appropriate anchors (not always included).
• Wear appropriate safety gear, including eye protection, during installation.
• Keep children and pets away during installation.
• Do not overtighten screws, as this may cause damage.
• This product is intended for indoor use only.

3. Product Specifications

Note: The product is designed for a low-profile installation, keeping your TV close to the wall.

4. Package Contents

Please verify that all parts are included before installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• Wall Plate (1)
• TV Bracket Arms (2)
• Mounting Hardware (Screws, Washers, Spacers, Wall Anchors - specific quantities may vary)
• Bubble Level (1) (Often included for installation)

Figure 1: Mount Dimensions and VESA Compatibility. This image illustrates the overall dimensions of the mount (440mm width, 417mm height) and indicates compatibility for 26-60 inch TVs. While the image shows VESA up to 400x400mm, please adhere to the product specification of Max VESA 200x200mm.

5. Setup and Installation

Follow these steps carefully to install your LOKLNEYK Universal TV Bracket.

5.1 Tools Required (Not Included)

• Pencil
• Drill
• Phillips Head Screwdriver
• Stud Finder (for wood stud walls)
• Measuring Tape
• Level (a small bubble level is often included)

5.2 Attaching TV Brackets to TV

1. Carefully place your TV face-down on a soft, clean surface to prevent screen damage.
2. Identify the VESA mounting holes on the back of your TV.
3. Select the appropriate screws, washers, and spacers from the provided hardware that fit your TV's mounting holes. Ensure the screws are long enough to securely fasten the brackets but not so long that they damage internal components.
4. Attach the two vertical TV bracket arms to the back of your TV using the selected hardware. Ensure the hooks on the bracket arms are facing upwards and the arms are centered and level. Do not overtighten.

5.3 Mounting the Wall Plate

1. Determine the desired height for your TV. Mark the center of where you want the TV to be.
2. Hold the wall plate against the wall at the desired height and use a level to ensure it is perfectly horizontal. Mark the drilling locations through the holes on the wall plate.
3. For Wood Stud Walls: Use a stud finder to locate the center of two adjacent wood studs. Drill pilot holes at the marked locations. Secure the wall plate to the studs using the provided wood screws and washers.
4. For Concrete/Brick Walls: Drill pilot holes at the marked locations. Insert the plastic wall anchors into the drilled holes. Secure the wall plate using the provided concrete screws and washers.
5. Verify the wall plate is securely fastened and level before proceeding.

Figure 2: Wall Plate Installation. This image shows the main wall plate securely mounted to a wall, ready for the TV to be attached.

Figure 3: Mount Construction Detail. This image emphasizes the cold-rolled steel material, indicating durability, and shows a built-in bubble level for accurate installation.

5.4 Hanging the TV

1. With assistance, carefully lift the TV with the attached bracket arms.
2. Hook the TV bracket arms onto the top edge of the wall plate.
3. Gently lower the TV until the bracket arms fully engage with the wall plate.
4. Secure the TV to the wall plate using the safety screws or locking mechanisms located at the bottom of the TV bracket arms. This prevents accidental dislodging.
5. Check that the TV is level and securely mounted.

6. Operation

The LOKLNEYK Universal TV Bracket is a low-profile wall mount designed for a fixed position with a slight tilting capability.

• Fixed Position: Once installed, your TV will be held securely in a fixed position close to the wall, optimizing space.
• Tilting Angle: This mount allows for a 0-15° tilting adjustment. To adjust the tilt, loosen the tilt adjustment screws on the side of the TV bracket arms, set the desired angle, and then securely tighten the screws. This feature helps reduce glare and provides a comfortable viewing experience from various positions.

Figure 4: Optimal Viewing Experience. This image demonstrates the TV mounted on the wall, providing an enhanced viewing experience and saving space.

7. Maintenance

Regular maintenance ensures the longevity and safety of your TV mount.

• Cleaning: Dust the mount periodically with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Check Connections: Annually, or if you notice any instability, check all screws and bolts to ensure they are securely tightened. Do not overtighten.
• Inspect for Damage: Periodically inspect the mount for any signs of wear, corrosion, or damage. If any damage is found, contact customer support for replacement parts or advice.

8. Troubleshooting

If you encounter issues during or after installation, refer to the following common problems and solutions.

9. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact LOKLNEYK customer service directly. Please have your model number (liangwei 90) and purchase details ready when contacting support.

Manufacturer: LOKLNEYK

Date First Available: January 10, 2026