1. Introduction
Thank you for choosing the YougetTech EH22 Evaporative Humidifier. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read these instructions thoroughly before use and retain them for future reference.
Safety Information
- Always place the humidifier on a firm, flat, water-resistant surface.
- Do not immerse the unit in water or other liquids.
- Unplug the humidifier before filling, cleaning, or moving.
- Keep out of reach of children and pets.
- Do not block air inlets or outlets.
- Ensure the power cord is not damaged or placed under heavy objects.
2. Product Overview
The YougetTech EH22 is an evaporative humidifier designed to increase room humidity without producing mist, preventing water accumulation and potential damage to furniture. It features a large water tank, automatic humidistat, and multiple fan speeds.
Components and Controls
- Control Panel: Touch-sensitive interface for all settings.
- Water Level Indicator: Transparent window on the front to monitor water levels.
- Air Outlet/Water Filling: Top grille for humidified air release and water refilling.
- Overflow Hole: Prevents overfilling.
- Humidifier Wick: Internal component for water evaporation.
3. Setup
Initial Placement
Place the humidifier on a flat, stable surface in the desired room. Ensure there is adequate space around the unit for proper airflow.
Filling the Water Tank
The EH22 features a convenient top-filling design. Use clean tap water. Before filling, ensure the nuts inside the humidifier are tightened and the sealing ring is installed to prevent leaks.
- Remove the top grille cover.
- Pour water directly into the opening until it reaches the maximum fill line indicated by the water level window. Do not overfill.
- Replace the top grille cover securely.
4. Operating Instructions
Power On/Off
Press the Power Key (⏻) on the control panel to turn the humidifier on or off.
Setting Desired Humidity (Auto Humidistat)
The Auto Humidistat function uses a built-in sensor to maintain a set humidity level (40% to 99%).
- Press the Humidification Key (💧) to activate the Auto Humidistat mode.
- Use the 'Set+' (+) and 'Set-' (-) keys to adjust the desired humidity percentage.
- The unit will automatically turn on/off to maintain this level.
Adjusting Fan Speed
The humidifier offers 7 fan speeds to control the rate of humidification.
- Press the Humidification Key (💧) repeatedly to cycle through the 7 fan speed levels.
- Higher speeds provide faster humidification, while lower speeds offer quieter operation.
Timer Function
Set the humidifier to operate for a specific duration (0-24 hours).
- Press the Timer Key (◷).
- Use the 'Set+' (+) and 'Set-' (-) keys to select the desired operating hours.
- The unit will automatically turn off after the set time.
No Mist Operation
The EH22 operates without producing visible mist, ensuring surfaces remain dry and reducing the risk of mineral dust buildup.
Water Shortage Alert
When the water tank is low, the low water alert light will flash, and the machine will automatically stop operating to prevent damage.
5. Maintenance
Cleaning the Humidifier Wick
The evaporative humidifier wick features a honeycomb structure and is washable by hand or machine. Regular cleaning is suggested once a week to maintain efficiency and longevity.
Emptying the Water Tank
To empty the water tank, remove the drain plug located at the bottom of the unit. Do not attempt to drain water directly from the main body to prevent potential damage.
6. Troubleshooting
If you encounter issues with your YougetTech EH22 humidifier, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Humidifier not turning on | No power; Water tank empty | Check power connection; Refill water tank. |
| No humidity output | Water tank empty; Wick is dry or clogged; Fan not operating | Refill water tank; Clean or replace wick; Check fan speed setting. |
| Water leakage | Nuts inside tank loose; Sealing ring improperly installed; Overfilled tank | Tighten nuts and ensure sealing ring is correctly placed; Do not overfill. |
| Unusual noise | Unit not on a flat surface; Obstruction in fan; High fan speed | Place on a stable surface; Check for obstructions; Reduce fan speed. |
If the problem persists, please contact customer support.
7. Specifications
- Brand: YougetTech
- Model Name: EH22
- Operation Mode: Evaporative (No Mist)
- Water Tank Capacity: 6.5 Liters (1.8 Gallons)
- Max Water Output: 1500 ml/h (9.6 gallons/24 hours)
- Coverage Area: Up to 1250 Square Feet
- Fan Speeds: 7 levels
- Humidity Adjustment Range: 40% to 99%
- Timer: 0-24 Hours
- Power: 30 Watts
- Voltage: 110 Volts
- Control Method: Touch
- Filter Type: Wick (washable)
- Material: Acrylonitrile Butadiene Styrene
- Item Dimensions (D x W x H): 12.5"D x 12.5"W x 21"H
- Item Weight: 12 Pounds
8. Warranty and Support
For detailed warranty information and customer support, please refer to the warranty card included with your product or visit the official YougetTech website. You may also find additional support resources and FAQs there.