1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Dioche 3.5-inch Digital Door Peephole Viewer. Please read this manual thoroughly before use to ensure proper functionality and safety.
2. Product Overview
2.1 Components
- Indoor Unit (LCD display)
- Outdoor Unit (Peephole Camera)
- Mounting Bracket
- Screw Bag
2.2 Specifications
| Feature | Specification |
|---|---|
| Type | Digital Security Peephole Viewer |
| Material | Zinc Alloy |
| LCD Screen | 3.5 inches |
| Sensor | 1 Megapixel CMOS Sensor |
| Viewing Angle | 120 degrees |
| Power Source | 4 x AAA Batteries (not included) |
| Door Hole Range | 14-28 mm |
| Door Thickness Range | 40-100 mm |
| Indoor Unit Dimensions | 120 x 62 x 20 mm |
| Outdoor Unit Diameter | 32 mm |
3. Safety Information
- Ensure correct battery polarity when inserting batteries.
- Do not expose the device to extreme temperatures or moisture.
- Keep out of reach of children.
- Do not attempt to disassemble or repair the unit yourself. Contact qualified personnel for service.
4. Setup and Installation
Before installation, ensure your door's thickness and peephole diameter are within the specified ranges (Door Hole: 14-28mm, Door Thickness: 40-100mm).
4.1 Package Contents
Verify that all components are present:
- 1 x Outdoor Unit (Peephole Camera)
- 1 x Indoor Unit (LCD Display)
- 1 x Mounting Bracket
- 1 x Bag of Screws
Image: Complete kit showing the indoor display unit, outdoor camera, and mounting hardware.
4.2 Installation Steps
- Remove Existing Peephole: If an existing peephole is present, unscrew and remove it from the door. If not, drill a hole of appropriate diameter (14-28mm) at the desired height.
- Install Outdoor Unit: Insert the outdoor unit (camera) through the door hole from the outside. Ensure the camera is facing outwards and the cable is threaded through to the inside of the door.
- Attach Mounting Bracket: From the inside of the door, slide the mounting bracket over the outdoor unit's cable and align it with the outdoor unit. Secure the bracket using the appropriate screws from the screw bag, ensuring it is tight against the door.
- Connect Indoor Unit: Connect the cable from the outdoor unit to the corresponding port on the back of the indoor display unit.
- Insert Batteries: Open the battery compartment on the back of the indoor unit and insert 4 AAA batteries (not included), observing correct polarity.
- Mount Indoor Unit: Align the indoor unit with the mounting bracket and slide it downwards until it clicks securely into place.
Image: The outdoor camera unit with its flexible connection cable.
Image: The indoor display unit with its battery compartment open, showing the mounting plate and screw holes.
Image: The indoor display unit (screen off) and the outdoor camera unit, along with the various screws for installation.
5. Operating Instructions
5.1 Powering On/Off
The device typically powers on automatically when the button on the indoor unit is pressed. It will power off after a short period of inactivity to conserve battery life.
5.2 Viewing Visitors
Press the button on the indoor unit to activate the screen and view who is at your door. The 3.5-inch LCD will display a clear image from the 120-degree wide-angle camera.
Image: The indoor display unit showing a live feed from the outdoor camera, with the outdoor unit visible.
6. Maintenance
- Cleaning: Wipe the screen and camera lens with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: When the low power alert is displayed, replace all 4 AAA batteries promptly.
- Environmental Conditions: Avoid exposing the device to direct sunlight for extended periods or extreme weather conditions.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Batteries are dead or incorrectly inserted. | Replace batteries with new ones, ensuring correct polarity. |
| No image on screen. | Cable connection is loose or damaged. | Check the connection between the outdoor and indoor units. Ensure the cable is fully inserted. |
| Image is blurry or unclear. | Camera lens is dirty or obstructed. | Clean the camera lens with a soft cloth. Ensure no obstructions are blocking the view. |
8. Warranty and Support
This Dioche product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact Dioche customer support.
For technical support or inquiries, please visit the official Dioche website or contact their customer service department. Keep your purchase receipt for warranty claims.