5five Roundy Console Table Instruction Manual

Introduction

Thank you for purchasing the 5five Roundy Console Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new console table. Please read these instructions carefully before beginning assembly and retain them for future reference.

Safety Information

• Proper Assembly: Assemble the console correctly according to the instructions provided. Incorrect assembly can lead to instability and potential injury.
• Avoid Overloading: Do not overload the console table. Exceeding its weight capacity can compromise its structural integrity and stability.
• Stable Placement: Place the console table on a flat, stable, and level surface to prevent tipping.
• Children Safety: Keep small parts and assembly hardware out of reach of children.
• Regular Checks: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.
• Indoor Use Only: This console table is designed for indoor use only.

Package Contents

Before assembly, please ensure all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 1 x Roundy Console Table (main components)
• Assembly Hardware (screws, dowels, etc. - typically in a separate bag)
• Assembly Instructions (this document)

Setup and Assembly Instructions

Follow these steps carefully to assemble your 5five Roundy Console Table. It is recommended to have two people for assembly.

Step 1: Unpack and Identify Parts

Carefully remove all components from the packaging. Lay them out on a clean, soft surface (like a blanket or carpet) to prevent scratches. Identify all parts against the included parts list (if provided separately, otherwise refer to the general components listed above).

Image: All components of the Roundy Console Table laid out on a protective surface, ready for assembly.

Step 2: Attach Side Panels

Attach the side panels to the main tabletop using the provided screws and dowels. Ensure the curved edges of the side panels are facing outwards as shown in the diagram. Do not overtighten screws initially.

Image: Close-up of the curved side panel of the console table, illustrating its design and how it connects to other parts.

Step 3: Install Drawer Mechanism

Mount the drawer slides to the designated positions on the console table's frame. Ensure they are level and aligned. Then, attach the corresponding slides to the drawer box. Refer to the detailed diagram for correct orientation.

Image: Detailed view of the drawer slide mechanism, showing proper installation for smooth drawer operation.

Step 4: Insert Drawer

Carefully slide the assembled drawer into the console table, aligning the drawer slides. Push gently until it clicks into place. Test the drawer to ensure smooth operation.

Image: The console table with its drawer partially open, demonstrating the functional storage and smooth movement.

Step 5: Final Tightening and Placement

Once all parts are assembled, gently tighten all screws. Do not overtighten. Place the console table in its desired location, ensuring it is stable and level. If necessary, use furniture levelers (not included) to adjust for uneven floors.

Operating Instructions

The 5five Roundy Console Table is designed for functional and decorative use. Place items on its surface or store them in the drawer. Ensure that the weight distribution is even to maintain stability.

• Drawer Use: Open and close the drawer gently. Avoid slamming to prevent damage to the slides and structure.
• Surface Use: Use coasters or protective pads under hot or wet items to prevent damage to the tabletop finish.

Maintenance

Proper care will extend the life and appearance of your console table.

• Cleaning: Wipe the surface with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
• Spills: Clean up spills immediately with a dry cloth to prevent staining or water damage.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood and ivory finish.
• Humidity: Maintain a stable humidity level in the room to prevent wood warping or cracking.

Troubleshooting

• Wobbly Table:

  Ensure all screws are securely tightened. Check if the table is on a level surface. Adjust with furniture levelers if needed.

• Drawer Sticks or Doesn't Close Smoothly:

  Check if the drawer slides are properly aligned and free of obstructions. Ensure the drawer box is assembled correctly and not warped. Lubricate slides with a silicone-based lubricant if necessary.

• Scratches or Dents:

  For minor scratches, touch-up pens or furniture repair kits matching the ivory or wood finish may be used. Consult a professional for significant damage.

Specifications

Warranty and Support

Warranty information for the 5five Roundy Console Table is typically provided with your purchase receipt or on the manufacturer's official website. Please retain your proof of purchase for any warranty claims.

For further assistance, missing parts, or technical support, please contact the retailer or the manufacturer directly using the contact information provided at the time of purchase.