EASYWORC SDoor-S9301-2672-BK-EW-01

EASYWORC Frameless Pivot Shower Door

Model: SDoor-S9301-2672-BK-EW-01

Instruction Manual

1. Introduction and Safety Information

This manual provides essential instructions for the safe and correct installation, operation, and maintenance of your EASYWORC Frameless Pivot Shower Door. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Important Safety Warnings:

  • Always wear safety glasses during installation.
  • Handle glass panels with extreme care. Tempered glass, while strong, can shatter if struck at the edges or corners.
  • Ensure the installation surface is level and structurally sound.
  • Use appropriate tools and hardware for your wall type.
  • Do not overtighten screws, as this can damage components or glass.
  • Ensure proper sealing to prevent water leakage.

2. Product Features

The EASYWORC Frameless Pivot Shower Door is designed for durability and ease of use, incorporating several key features:

  • Perfect Fit for 24"-26" Spaces: This shower door is designed to fit compact openings from 24" to 26" wide, offering a smooth pivot system for effortless operation in space-limited bathrooms.
  • Advanced Easy-Clean & Safety Glass: Features 6mm clear tempered glass with an interior nano coating to prevent water spots and simplify cleaning. The glass includes an explosion-proof film for enhanced safety, preventing splintering if broken. Certified by CPSC, ANSI, and SGCC.
  • Elegant Frameless Design: A sleek frameless construction with a smudge-resistant matte black frame provides a minimalist aesthetic.
  • Convenient & Practical Operation: The hinged door opens outward smoothly up to 90 degrees. It includes an interior mini-handle and an exterior 304 stainless steel towel bar.
  • Hassle-Free Installation: Designed for quick DIY setup with detailed instructions and video guidance.

3. Product Overview

Below are visual representations of the shower door's key features and dimensions.

EASYWORC Frameless Pivot Shower Door, Matte Black

Overall view of the EASYWORC Frameless Pivot Shower Door in Matte Black.

Shower door glass with nano coating comparison

Illustration of the premium nano coating on the glass, showing how it repels water compared to uncoated glass.

Laser-engraved stainless steel handle and towel bar

Close-up of the laser-engraved stainless steel handle and exterior towel bar, highlighting the inner grab handle.

Angled magnetic seal strip for shower door

Detail of the angled magnetic seal strip, designed for superior water-tightness and quiet closing.

Smart pivot mechanism for shower doors

Diagram illustrating the smart pivot system, which lifts to open silently and lowers to seal for leak-proof closure.

Tempered glass with anti-explosion film

Comparison showing how regular glass and tempered glass break, versus tempered glass with the EASYWORC anti-explosion film.

Width adjustment feature of shower door

Illustration of the width adjustment feature, allowing up to 1 inch of adjustment on each side.

Reversible installation for left or right hand operation

Demonstration of the reversible installation, allowing the door to open from either the left or right side.

Product dimensions for EASYWORC shower door

Detailed product dimensions: 24"-26" Shower Door Width, 72" Shower Door Height, 19 5/8"-21 5/8" Walk-in Width, 1/4" Glass Thickness.

4. Setup and Installation

The installation process for the EASYWORC Frameless Pivot Shower Door is designed to be straightforward. A detailed video guide is available to assist you.

Official installation video for the EASYWORC Pivot Shower Door (Model S9301). This video demonstrates the step-by-step process for mounting the wall profiles, installing the pivot door, and applying sealant.

General Installation Steps (Refer to video for full details):

  1. Preparation: Ensure the shower area is clean, dry, and level. Gather all tools and components.
  2. Marking: Use a level to mark the positions for the wall profiles on your shower wall.
  3. Drilling: Drill pilot holes at the marked locations. Insert wall anchors if necessary.
  4. Install Wall Profiles: Secure the vertical wall profiles to the wall using screws.
  5. Assemble Door: Attach the pivot hardware to the glass door panel.
  6. Mount Door: Carefully lift and position the door panel into the wall profiles, engaging the pivot mechanisms.
  7. Adjust and Secure: Make any necessary width adjustments within the wall profiles (up to 1 inch on each side) to ensure a snug fit and smooth operation. Tighten all screws.
  8. Seal: Apply silicone sealant along the exterior seams of the wall profiles and the bottom of the door frame to prevent water leakage. Allow adequate drying time before use.

5. Operating Instructions

Your EASYWORC Frameless Pivot Shower Door is designed for smooth and quiet operation.

  • Opening: Gently pull the handle to open the door. The smart pivot mechanism will slightly lift the door as it swings outward, ensuring smooth movement over the threshold. The door can swing up to 90 degrees.
  • Closing: Push the door gently until it aligns with the wall profile. The pivot mechanism will lower the door, engaging the magnetic seal strip for a secure, leak-proof closure.
  • Reversible Operation: The door can be installed to open from either the left or right side, depending on your bathroom layout and preference.

6. Maintenance

Regular cleaning and maintenance will ensure the longevity and appearance of your shower door.

  • Glass Cleaning: The nano-coated glass resists water spots. For best results, wipe down the glass after each use with a soft cloth or squeegee. For deeper cleaning, use a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that could damage the coating.
  • Frame Cleaning: Clean the matte black aluminum frame with a soft cloth and mild soap and water. Do not use abrasive cleaners or solvents, as these can damage the finish.
  • Seal Maintenance: Periodically inspect the magnetic seal strips for wear or damage. Ensure they are free of soap scum or debris to maintain a tight seal. Clean with mild soap and water.
  • Hardware: Check all screws and connections periodically to ensure they remain tight. Do not overtighten.

7. Troubleshooting

If you encounter issues with your shower door, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Water leakageImproper sealing; damaged seal strips; door not closing completely.Check silicone sealant and reapply if necessary. Inspect and clean or replace seal strips. Ensure door is properly aligned and closes fully.
Door does not close smoothlyMisaligned wall profiles; debris in pivot mechanism; worn pivot components.Check wall profile alignment and adjust if needed. Clean any debris from the pivot mechanism. Contact support if pivot components appear worn.
Door is difficult to open/closeTight pivot mechanism; friction from seals.Ensure pivot mechanism is clean. Apply a small amount of silicone lubricant to the pivot points if necessary. Check if seals are obstructing movement.
Glass appears cloudy or stainedHard water buildup; improper cleaning.Use a non-abrasive glass cleaner specifically designed for shower doors. Regular wiping after use helps prevent buildup.

If you cannot resolve the issue using the troubleshooting guide, please contact customer support.

8. Specifications

AttributeDetail
BrandEASYWORC
Model NumberSDoor-S9301-2672-BK-EW-01
ColorMatte Black
MaterialAluminum (Frame), Tempered Glass
Glass Thickness1/4 inch (6mm)
Shower Door Width24"-26" W (Adjustable)
Shower Door Height72" H
Walk-in Width19 5/8"-21 5/8"
Item Weight48.7 Pounds
Assembly RequiredYes
CertificationsCPSC, ANSI, SGCC

9. Warranty and Support

Your EASYWORC Frameless Pivot Shower Door comes with a return policy allowing for refunds or replacements within 30 days of purchase. For any inquiries, concerns, or assistance with installation, product matching, or issues after purchase, please refer to the following support options:

  • Before Purchase: Quick answers to inquiries or concerns.
  • After Purchase: Find your shower door order in 'Your Orders' and click 'Contact Seller'.
  • Show Us the Issue: Send photos and describe what's wrong for quicker resolution.
  • Resolution: We aim to reply within 24 hours with a solution, often providing fast, free replacement of damaged or missing parts within a few days.

Customer Service Contact:

  • Phone: 1-888-998-5388 (Monday-Friday, 9 AM - 5 PM PST)
  • Online: 7/24 Online Customer Care

EASYWORC is committed to providing high-quality, user-friendly products and excellent customer support. We believe in transforming every bathroom into a rejuvenating sanctuary.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.