Introduction
Thank you for choosing the Yafylly 78-Inch Double Dog Crate Furniture. This manual provides detailed instructions for the assembly, operation, and maintenance of your new pet furniture. Please read all instructions carefully before assembly and use to ensure safe and proper functionality.
Safety Information
- Ensure all parts are securely fastened before allowing pets to use the crate.
- Do not exceed the maximum weight capacities: 200 lbs on the tabletop and 150 lbs on the bottom level.
- Keep small children away from the assembly area.
- Regularly inspect the crate for any loose or damaged parts. Discontinue use if damage is found.
- This product is designed for indoor use only.
Package Contents
Verify that all components listed below are present before beginning assembly.
- 1 x Large Double Dog Crate Furniture
- 1 x Assembly Kit (includes all necessary hardware)
- 1 x Instructions Manual (this document)
- 1 x Divider
- 2 x Dog Bowl Holders with 4 Bowls
Assembly Instructions
Assembly is straightforward and requires basic tools. Follow the step-by-step instructions provided in the included assembly kit. It is recommended to have two people for easier assembly.
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Identify all parts using the parts list in the assembly kit.
- Begin by assembling the base frame according to the diagrams.
- Attach the side panels and back panels.
- Install the internal divider if desired. The divider is removable to create one large space.
- Secure the top panel.
- Attach the doors and ensure they open and close smoothly, and the locking mechanisms function correctly.
- Install the adjustable feet at the bottom of the crate.
- Attach the dog bowl holders to the desired side of the crate.
- Place the bowls into the holders.
- Ensure all screws and fasteners are tightened.
Figure 1: Fully assembled Yafylly Double Dog Crate Furniture.
Figure 2: The double dog crate with a removable divider, accommodating two dogs.
Operating Instructions
Removable Center Divider
The crate features a removable center divider. This allows you to configure the space for either one large dog or two smaller to medium-sized dogs. To remove or install the divider, follow the instructions in your assembly kit. Ensure the divider is securely in place if separating pets.
Figure 3: The removable divider allows flexible space configuration.
360° Rotating and Adjustable Height Dog Bowl Holder
The dual dog bowl holders can rotate 360 degrees and have 5 levels of height adjustment (1.2-inch increments per level). This design allows for feeding both inside and outside the crate and accommodates different pet heights for optimal comfort.
- To Adjust Height: Locate the adjustment mechanism on the bowl holder. Lift or lower the holder to the desired height and secure it in place.
- To Rotate: Gently rotate the bowl holder to position the bowls either inside the crate for your pet or outside for easy refilling.
Figure 4: The 360° rotatable dog bowl stand.
Figure 5: The 5 height options for the adjustable dog bowl stand.
Maintenance
- Cleaning: Wipe down the particleboard and steel surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners. The wooden base of the bowl holder is waterproof, but excessive moisture should be avoided.
- Bowl Cleaning: The stainless steel bowls are removable and dishwasher safe for easy cleaning.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Tighten if necessary.
- Damage: If any part of the crate becomes damaged, discontinue use and contact customer support for replacement parts or advice.
Figure 6: The crate features a waterproof countertop for easy cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Crate feels unstable or wobbly. | Loose screws or uneven floor. | Ensure all assembly screws are tightened. Adjust the leveling feet on the bottom of the crate to stabilize it on uneven surfaces. |
| Doors do not close or latch properly. | Misalignment during assembly or obstruction. | Check door hinges and latch alignment. Re-adjust if necessary. Ensure no debris is obstructing the latch mechanism. |
| Dog bowl holder is difficult to rotate or adjust. | Mechanism is stiff or obstructed. | Ensure no foreign objects are lodged in the mechanism. Apply a small amount of food-grade lubricant if stiffness persists. |
| Damage to parts upon arrival. | Shipping damage. | Do not proceed with assembly. Contact Yafylly customer support immediately for assistance and replacement parts. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 78-DC-GREY |
| Color | Grey |
| Material | Particleboard, Steel (Alloy Steel, Engineered Wood) |
| External Dimensions (L x W x H) | 78.8" x 27.3" x 33.5" |
| Item Weight | 94 Pounds |
| Max. Static Load Capacity (Top) | 200 lbs |
| Max. Static Load Capacity (Bottom) | 150 lbs |
| Dog Bowl Holder | 360° Rotating, 5-level Adjustable Height |
| Divider | Removable |
| Recommended Breeds | All Breed Sizes (Small, Medium, Large Dogs) |
| Specific Uses | Indoor |
Figure 7: Detailed dimensions and weight capacities.
Warranty and Support
Yafylly products are designed for quality and durability. For any questions, missing parts, or issues with your product, please contact Yafylly customer support. Refer to your purchase documentation for specific warranty details.
Customer Support: Please visit the Yafylly Store on Amazon or contact the seller directly through your Amazon order history for assistance.
