HS-860

Generic HS-860 Portable Electric Juicing Cup User Manual

Model: HS-860

1. Introduction

Thank you for purchasing the Generic HS-860 Portable Electric Juicing Cup. This compact and rechargeable blender is designed for convenient preparation of fresh juices, smoothies, and shakes on the go. Please read this manual thoroughly before first use to ensure safe and optimal operation. Keep this manual for future reference.

2. Important Safety Instructions

To reduce the risk of injury or damage, always follow basic safety precautions when using electrical appliances:

  • Read all instructions before use.
  • Do not immerse the motor base in water or other liquids. Clean with a damp cloth only.
  • Keep hands and utensils out of the blending cup while blending to prevent severe injury.
  • Ensure the lid is securely fastened before operating the blender.
  • Do not blend hot liquids, as pressure buildup may cause injury.
  • Do not overfill the blending cup.
  • Avoid blending hard ingredients like whole nuts, coffee beans, or frozen solid fruits without sufficient liquid, as this may damage the blades or motor.
  • This appliance is not intended for use by children. Keep out of reach of children.
  • Do not operate the blender if the USB charging cable or plug is damaged, or if the appliance malfunctions or has been dropped or damaged in any manner.
  • Use only the provided USB charging cable.
  • Do not attempt to repair the appliance yourself. Contact customer support for assistance.

3. Product Overview

The HS-860 Portable Electric Juicing Cup features a user-friendly design for convenient blending.

Components:

  • Lid with silicone handle
  • Blending Cup (Plastic)
  • Motor Base with integrated 12-blade stainless steel assembly
  • Bottom Charging Port
  • Control Panel with LED display
  • USB Charging Cable
Product details of HS-860 Portable Electric Juicing Cup showing silicone handle, bottom charging port, and 12-blade steel blade.

Image: Key components of the HS-860 Portable Electric Juicing Cup, including the silicone handle, bottom charging port, and the 12-blade stainless steel assembly.

Features:

  • Portable & Rechargeable: Built-in battery for wireless operation.
  • Compact & Lightweight: Easy to carry for travel, gym, or office.
  • Stainless Steel Blades: Durable 12-blade design for efficient blending.
  • One-Touch Operation: Simple and intuitive to use.
  • LED Display: Provides operational status.
  • Leak-Proof Lid: Ensures no spills during transport.
Two HS-860 Portable Electric Juicing Cups, one white and one purple, demonstrating the product's portability and compact design.

Image: The HS-860 Portable Electric Juicing Cup, highlighting its compact and portable design.

4. Setup

  1. Unpack: Carefully remove all components from the packaging.
  2. Initial Cleaning: Before first use, wash the blending cup and lid with warm soapy water. Rinse thoroughly and dry. Wipe the motor base with a damp cloth. Do not immerse the motor base in water.
  3. Charge Battery: Ensure the blender is fully charged before its first use. Refer to Section 5 for charging instructions.

5. Charging the Battery

The HS-860 Juicing Cup is powered by a rechargeable battery.

  1. Locate the charging port at the bottom of the motor base.
  2. Connect the provided USB charging cable to the charging port.
  3. Plug the other end of the USB cable into a compatible USB power source (e.g., wall adapter, computer, power bank).
  4. The LED display will indicate charging status. A full charge typically takes 2-3 hours.
  5. Once fully charged, disconnect the USB cable.

6. Operation

Follow these steps to prepare your beverages:

  1. Prepare Ingredients: Cut fruits and vegetables into small pieces (approximately 1-2 cm or 0.5-1 inch). This prevents the blades from getting stuck and ensures smooth blending.
  2. Add Ingredients: Place your prepared ingredients into the blending cup.
  3. Add Liquid: Pour in an appropriate amount of liquid (water, milk, juice, etc.). Ensure the total volume does not exceed the maximum fill line.
  4. Secure Lid: Screw the lid onto the blending cup tightly until it is fully sealed. The blender will not operate if the lid is not properly secured.
  5. Start Blending: Invert the blender so the motor base is at the top. Press the power button on the control panel to start blending. The LED display will illuminate.
  6. Blend: Blend for 30-60 seconds, or until desired consistency is achieved. You can gently shake the blender during operation to ensure all ingredients are mixed.
  7. Stop Blending: Press the power button again to stop the blending cycle.
  8. Serve: Unscrew the lid and pour your freshly blended beverage into a glass.
HS-860 Portable Electric Juicing Cup filled with cut fruits, ready for blending, surrounded by various fresh fruits.

Image: The HS-860 Juicing Cup with ingredients, illustrating preparation for blending.

A hand pouring freshly blended juice from the HS-860 Portable Electric Juicing Cup into a glass.

Image: Pouring a freshly blended beverage from the HS-860 Juicing Cup.

7. Cleaning and Maintenance

Proper cleaning ensures the longevity and hygiene of your juicing cup.

  1. Immediate Cleaning: Clean the blender immediately after each use to prevent food residue from drying.
  2. Disassemble: Unscrew the blending cup from the motor base.
  3. Wash Cup and Lid: Wash the blending cup and lid with warm, soapy water. Use a brush to clean around the blades carefully. Rinse thoroughly.
  4. Clean Motor Base: Wipe the exterior of the motor base with a damp cloth. Do not immerse the motor base in water or rinse it under running water.
  5. Drying: Allow all parts to air dry completely before reassembling or storing.
  6. Storage: Store the clean and dry juicing cup in a cool, dry place.

Note: The HS-860 Portable Electric Juicing Cup is NOT dishwasher safe.

8. Troubleshooting

Problem Possible Cause Solution
Blender does not start.
  • Lid not securely fastened.
  • Battery is low or depleted.
  • Overloaded with ingredients.
  • Ensure the lid is tightly screwed on.
  • Charge the blender fully.
  • Reduce the amount of ingredients.
Blades are stuck.
  • Too many ingredients or large pieces.
  • Insufficient liquid.
  • Turn off, remove some ingredients, and cut into smaller pieces.
  • Add more liquid.
Leaking from the cup.
  • Lid not properly sealed.
  • Overfilled cup.
  • Ensure the lid is screwed on tightly.
  • Do not exceed the maximum fill line.
Blender stops unexpectedly.
  • Battery depleted.
  • Overheating protection activated.
  • Recharge the battery.
  • Allow the blender to cool down for 15-20 minutes before resuming use.

9. Specifications

Diagram showing the dimensions of the HS-860 Portable Electric Juicing Cup: 25cm height and 7.5cm width, along with icons for features like fresh squeezed, high power, 12-blade, 450ml capacity, long life, simple operation, dual lid drinking, and easy to carry.

Image: Dimensions and key features of the HS-860 Portable Electric Juicing Cup.

  • Model: HS-860
  • Brand: Generic
  • Capacity: 380 Milliliters
  • Product Dimensions: 8D x 8W x 23H Centimeters
  • Item Weight: 0.45 Kilograms
  • Material: Plastic (Container), Stainless Steel (Blade)
  • Power Source: Rechargeable battery (USB charging)
  • Voltage: 7.4 Volts
  • Wattage: 120 Watts
  • Number of Speeds: 1
  • Control Type: Single-level
  • Included Components: 1 × Portable juicing cup, 1 × USB charging cable, 1 × User manual

10. Warranty and Support

For any product-related inquiries, troubleshooting assistance, or warranty information, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for any warranty claims.

Manufacturer: a to z accessories

Manufacturer Address: millat nagar road no 3 yusuf ramzan building bhiwandi 421302

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.