CAMECHO 4+64GB Android 15 Car Stereo

CAMECHO 4+64GB Android 15 Car Stereo User Manual

For Chevrolet GMC Sierra/Chevy Silverado 2014-2018

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your CAMECHO 4+64GB Android 15 Car Stereo. Please read this manual thoroughly before installation and use to ensure proper function and to maximize your experience with the device. Keep this manual for future reference.

Vehicle Compatibility

This car stereo is specifically designed for the following vehicle models:

  • Chevrolet Silverado 1500 (2014-2018)
  • Chevrolet Silverado 2500 (2014-2018)
  • Chevrolet Silverado 2500 HD (2014-2018)
  • Chevrolet Silverado 3500 (2015-2018)
  • Chevrolet Silverado 3500 HD (2014-2018)
  • GMC Sierra (2014-2018)
  • GMC Sierra 1500 (2014-2018)
  • GMC Sierra 2500 HD (2014-2018)
  • GMC Sierra 3500 HD (2014-2018)

Important Note: This unit is not compatible with vehicles equipped with an original Bose Audio System or an optical fiber power cable (power cable with only 2 cables).

CAMECHO Car Stereo installed in a Chevrolet Silverado dashboard, showing compatibility with 2014-2018 models.
Image illustrating the CAMECHO car stereo installed in a compatible Chevrolet Silverado dashboard, highlighting the applicable car models and years.

Packing List

Before proceeding with installation, please verify that all components are present in the package:

  • 1 x Android Head Unit
  • 1 x AHD Backup Camera
  • 1 x External Microphone
  • 1 x Small Horn
  • 1 x Astern Adapter Cable
  • 2 x Direction Control Adapter Cable
  • 1 x Installation Tool
  • 1 x Instruction Manual
  • 1 x Dupont Wire
  • 2 x USB Cable
  • 1 x Original USB Cable
  • 1 x Rear Camera Input Cable
  • 1 x Protocol Box
  • 1 x GPS Antenna
  • 1 x Radio Antenna
  • 1 x Power Cable
  • 1 x RCA Cable
Diagram showing the dimensions of the CAMECHO car stereo and a visual list of all included accessories and cables.
Image displaying the dimensions of the head unit and a comprehensive visual list of all components included in the package.

Setup and Installation

Before beginning the installation, ensure the vehicle's power is disconnected to prevent electrical damage. It is recommended to prepare tools such as a plastic pry tool and a screwdriver.

Disassembly of Original Radio

  1. Use a pry bar to carefully open the outer frame of the original car radio.
  2. Use a screwdriver to unscrew the four screws securing the original radio.
  3. Gently pull out the wires connected to the original car radio.
  4. Use a pry bar to open the air-conditioning button board on the original car radio panel.
  5. Unscrew the two screws fixing the left and right sides of the CD player.
  6. Pull out the wires connected to the original CD player.
  7. Unplug the cable connecting the host to the original car, then remove the host unit.

New Radio Installation

  1. Connect the wiring harness and protocol box of the new radio. If the wiring harness does not match, contact customer service for the correct wiring harness.
  2. Install the air-conditioning button panel to the new radio panel.
  3. Install the new radio, tightening the four fixing screws on the left and right sides.
  4. Install the radio frame.
Step-by-step visual guide for disassembling the original car radio and installing the new CAMECHO unit.
Visual instructions for removing the factory radio and installing the new CAMECHO head unit.

Wiring Connections

Ensure all cables are securely connected as per the diagrams below.

CANBUS Box Connection

Confirm that the CANBUS box is connected. After connecting, you may need to set the protocol correctly for steering wheel controls to function. Navigate to Car Settings > Factory (Password: 1234) > CarType Setting, then choose Xinput - Chevrolet - Silverado - 2012-2019 for your vehicle.

Wiring diagram for the CANBUS box connection and instructions for setting up steering wheel controls.
Diagram showing CANBUS box connection and steps for configuring steering wheel controls.

Reversing Camera Installation

The reversing input must be plugged in even if a reversing camera is not used.

  • Connect the positive pole of the power supply of the car's reversing light.
  • Connect to the negative pole of the power supply of the car's reversing light.
  • The reversing trigger is controlled by the stereo and does not require a separate connection.

After wiring, set the camera resolution via Settings > Factory Setup (Password: 1234) > Backcar Source Settings. Select the camera resolution and restart your car.

Wiring diagram for the included AHD reversing camera installation.
Diagram for connecting the included AHD backup camera.

Original Backup Camera Connection

If you are using an original backup camera, connect the yellow AV connector ("CAM Video In") of the power cable to the Reversing Input cable.

Then set the camera resolution via Settings > Factory Setup (Password: 1234) > Backcar Source Settings. Select the camera resolution and restart your car.

Wiring diagram for connecting an original factory backup camera.
Diagram for connecting an existing factory backup camera.

Operating Instructions

User Interface and Display

The unit features a 10-inch in-cell 1280*720P HD capacitive touchscreen. You can customize the home page by selecting the applications you wish to display.

Image showing the 10-inch in-cell screen with multiple customizable user interfaces.
The in-cell screen technology and options for customizing the user interface.

Wireless Carplay & Android Auto

The stereo supports wireless Apple Carplay and Android Auto, allowing access to phone calls, messages, navigation, and music directly from the touchscreen. Hands-free communication is supported via Siri/Google assistants.

Connecting Wireless Apple Carplay

  1. Connect the car radio's Bluetooth (Bluetooth name: "Car BT0", Bluetooth PIN: 1234). Ensure "phone audio, music audio" is successfully connected.
  2. Click "SpeedPlay".
  3. Allow Contacts and Favorites Sync. Allow "Use CarPlay with SpeedPlay".
  4. Wait for connection. The first connection may take longer.
Screenshot of Wireless Apple Carplay interface and connection steps.
Visual guide for connecting and using Wireless Apple Carplay.

Connecting Wireless Android Auto

  1. Click "SpeedPlay".
  2. Connect your phone into the rear 4-pin USB port with the original data cable.
  3. Allow "USB debugging" on your phone.
  4. Wait for connection. The first connection may take longer.
Screenshot of Wireless Android Auto interface and connection steps.
Visual guide for connecting and using Wireless Android Auto.

GPS Navigation & WiFi Connectivity

The unit includes a built-in WiFi/Hotspot module, allowing you to download various applications like Google Maps, Waze, Spotify, YouTube, and Netflix. You can surf the internet and access online maps. For offline navigation, download maps within the Here WEGO app.

Image showing GPS navigation and WiFi connectivity features on the car stereo.
Display of GPS navigation and WiFi hotspot connection capabilities.

Bluetooth & FM RDS Tuner

Support Bluetooth 5.0 for hands-free calling and wireless music streaming from your phone (e.g., Spotify, Pandora). The built-in FM RDS Radio provides access to music, news, and sports with 18 preset stations.

Image showing Bluetooth calling and FM RDS radio interface on the car stereo.
Interface for Bluetooth hands-free calling and FM RDS radio functions.

Steering Wheel Control (SWC)

The unit is compatible with original steering wheel control buttons. After connecting the CANBUS box and setting the protocol (as described in the Setup section), you can configure the buttons to control various functions of the stereo.

Image demonstrating steering wheel control functionality and setup screen.
Illustration of steering wheel controls and the on-screen learning interface.

Split Screen Functionality

The split-screen feature allows two applications to run simultaneously, enhancing multitasking capabilities. For example, you can use navigation on one side and music playback on the other.

Image showing the split-screen feature with two applications running concurrently.
Demonstration of the split-screen mode, displaying navigation and media simultaneously.

iOS/Android Mirror Link

Synchronize your smartphone screen to the car radio display. Android devices support two-way operation, while iOS devices support one-way operation (display only).

Image illustrating the iOS/Android Mirror Link feature, showing a phone screen mirrored to the car stereo.
Visual representation of the Mirror Link function for both iOS and Android devices.

Maintenance

To ensure the longevity and optimal performance of your car stereo, follow these general maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that may damage the surface.
  • Software Updates: Periodically check for available software updates to ensure you have the latest features and bug fixes. Updates can typically be found through the system settings or the manufacturer's website.
  • Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

Troubleshooting

This section addresses common issues you might encounter with your CAMECHO car stereo.

No Sound Output

If you experience no sound from the stereo:

  1. Connect the Small Horn to the power harness.
  2. Connect the AUX IN R/L (or AUDIO OUT R/L) from the RCA cable to AUX IN R/L from the Power harness.
  3. Open the "Car Amplifier" application on the drag-down page of the top bar.
  4. For external power amplifiers, connect the power cable of the amplifier to the ACC cable of the Power harness.
Wiring diagram and steps to troubleshoot no sound issues.
Diagram and instructions for resolving no sound output from the stereo.

Backup Camera Not Working

If the backup camera is not displaying an image:

  • Verify all camera wiring connections as per the installation section.
  • Ensure the reversing input cable is correctly connected to the main device. The white plug must be connected to the main device for Bluetooth and WiFi signals.
  • Check camera settings: Go to Settings > Factory Setup (Password: 1234) > Backcar Source Settings and ensure the correct camera resolution is selected. Restart the car after making changes.

Unit Freezes or Cannot Play Videos

If the unit freezes or experiences issues playing videos:

  • Restart the unit: Turn off the vehicle, wait a few minutes, and then restart.
  • Check storage: Ensure there is sufficient free storage space on the device.
  • Software updates: Verify if any system updates are available and install them.
  • Factory Reset: As a last resort, perform a factory reset (note: this will erase all user data and settings). Consult the system settings for this option.

Specifications

Product Dimensions31.8L x 5W x 26H Centimetres
Operating SystemAndroid 15
Memory4GB RAM + 64GB ROM
Screen Size10 Inches
Screen Resolution1280 x 720P HD
Touch Screen TypeCapacitive
Wireless ConnectivityWireless Carplay, Android Auto, WiFi, Bluetooth 5.0
NavigationGPS (Worldwide Map Type)
Radio TunerFM RDS Radio
Compatible DevicesSmartphone
ManufacturerCAMECHO
Country of OriginChina

Warranty Information

This CAMECHO car stereo comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, troubleshooting, or any inquiries regarding your CAMECHO car stereo, please contact our customer support team:

Our support team is available to provide assistance and guidance.

Image of a customer support representative with contact email for assistance.
Contact information for customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.