1. Introduction
This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your AZHAR G26 Foldable Electric Bike. Please read this manual thoroughly before using the product to ensure proper function and safety.
Safety Guidelines
- Always wear a helmet and appropriate safety gear when riding.
- Perform a pre-ride inspection, including brakes, tires, and battery level.
- Obey all local traffic laws and regulations.
- Do not ride under the influence of alcohol or drugs.
- Avoid riding in adverse weather conditions or on slippery surfaces.
2. What's in the Box
Upon unpacking, ensure all components are present:
- Electric Bike x1
- Removable Battery x1
- Charger x1
- Tool Kit x1
- Bell x1
- Rear Reflector x1
- User Manual x1
3. Setup and Assembly
3.1 Unfolding the Electric Bike
The AZHAR G26 features a three-step quick-fold design for portability. Carefully unfold the frame until it locks into place. Ensure all locking mechanisms are securely fastened before use.
3.2 Installing Rear Pedals
Attach the rear pedals using the provided tool kit. Ensure they are tightened securely to prevent loosening during operation.
Video 3.2: This video demonstrates the installation process for the bike's rear pedals.
3.3 Initial Battery Charging
Before first use, fully charge the 48V 10Ah lithium battery. Connect the charger to the bike's charging port and then to a power outlet. The charging time is typically 3-5 hours.
3.4 Adjusting Handlebars and Seat
Adjust the handlebars and seat height to a comfortable riding position. Ensure all quick-release levers are securely fastened after adjustment.
4. Operating Instructions
4.1 Powering On/Off and Lights
To power on the bike, press and hold the power button on the display. To turn the lights on or off, click the menu button once.
Video 4.1: This video demonstrates how to use the throttle and operate the display functions, including turning lights on/off.
4.2 Understanding the Liquid Crystal Display
The integrated liquid crystal display shows important riding data at a glance, including battery charge, speed, and gear adjustment. The display also indicates the current status (E, D, S for speed modes).
4.3 Riding Modes and Speed Adjustment
The bike offers three riding modes: Throttle Mode, Pedal Assist, and Walk Assist. To switch gears, press the menu button twice continuously. The 'S' mode offers the highest speed. To switch speed units (kilometers to miles), click the menu button three times consecutively.
4.4 Safety Features
The bike is equipped with a bright LED headlight, brake light, and reflective strips for enhanced visibility. Rear disc brakes and an electronic brake system contribute to safe stopping.
5. Maintenance
5.1 General Cleaning
Regularly clean your electric bike with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
5.2 Battery Care
To prolong battery life, charge it regularly, even if not in frequent use. Store the battery in a cool, dry place and avoid extreme temperatures.
5.3 Brake Inspection and Adjustment
Periodically check the brake pads and discs for wear. If you notice friction noise or reduced braking performance, adjust the brake calipers as needed.
Video 5.3: This video provides instructions on how to adjust the front brakes to eliminate friction noise.
5.4 Tire Pressure
Maintain proper tire pressure for optimal performance and safety. Refer to the tire sidewall for recommended PSI.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Low battery; loose battery connection; power button not pressed correctly. | Charge the battery; ensure battery is securely connected; press and hold the power button. |
| Motor not engaging | Low battery; incorrect riding mode; loose motor cable. | Charge the battery; select a power-assisted mode; check motor connections. |
| Brake noise/ineffectiveness | Misaligned brake caliper; worn brake pads; debris on disc. | Adjust brake caliper (refer to Section 5.3); replace worn pads; clean brake disc. |
| Battery not charging | Charger not connected properly; faulty charger/battery; power outlet issue. | Verify connections; try a different outlet; contact support if issue persists. |
7. Specifications
The AZHAR G26 Foldable Electric Bike is designed with the following technical specifications:
| Feature | Detail |
|---|---|
| Model Number | G26 |
| Motor | 1200W Peak Brushless Motor |
| Battery | 48V 10Ah Lithium Battery (480 Watt Hours) |
| Max Speed | Up to 25 MPH |
| PAS Range | Up to 45 Miles |
| Tires | 14-inch Pneumatic Tires |
| Suspension | Dual Suspension |
| Speed Modes | 3-Speed Modes |
| Frame Material | Alloy Steel |
| Max Load Capacity | 300 lbs |
| Charging Time | 3-5 Hours |
| Brake Style | Disc |
| Recommended Height | 4.9 Ft - 5.9 Ft |
| Scooter Weight | 56.6 LBS |
8. Warranty and Support
8.1 Warranty Information
AZHAR offers a 1-year limited warranty on the electric bike. This warranty covers manufacturing defects under normal use. Please retain your purchase receipt for warranty claims.
8.2 Return and Exchange Policy
The product is eligible for 30-day returns and exchanges. Please keep the original e-bike box for 1 month in case a return is necessary. Contact customer support before initiating any return to avoid lost packages.
8.3 Customer Support
For any issues or inquiries, please describe the problem and attach relevant pictures. Our support team aims to respond within 24 hours.
