Introduction
This manual provides comprehensive instructions for the Generic Outdoor Waterproof Motorcycle Cover, specifically designed for the Benelli Tornado Naked Tre R160. This cover is engineered to offer robust protection against various environmental elements, helping to preserve your motorcycle's condition and appearance. Constructed from durable Oxford fabric with a reinforced 4-layer hail protection system, it is designed to be abrasion-resistant, tear-resistant, and waterproof, while also providing UV and wind resistance.
Product Features
- Material Composition: Made from waterproof Oxford fabric and cotton, featuring a reinforced 4-layer hail protection design for superior durability and protection.
- All-Weather Protection: Shields your motorcycle from wind, rain, snow, dust, hail, and UV radiation, preventing damage to paint and parts.
- Tear-Resistant: The 210D Oxford fabric ensures the cover is highly resistant to tearing and wear.
- Secure Fit: Equipped with double-stitched elastic edges, windproof buckles, and highly elastic bands at the bottom and front for a snug and secure fit, even in strong winds.
- Enhanced Visibility & Security: Features four reflective strips for increased visibility at night and metal lock holes on the front wheel for use with an anti-theft lock (lock not included).
- Easy Storage: Comes with a dedicated storage bag for convenient portability and compact storage when not in use.
Setup Instructions
- Cool Down Motorcycle: Ensure the motorcycle's engine and exhaust components are completely cool before applying the cover. Applying the cover to hot surfaces can cause damage to the cover material.
- Clean Motorcycle: For best results and to prevent potential scratches, ensure your motorcycle is clean and free of excessive dirt or debris before covering.
- Unfold Cover: Carefully unfold the motorcycle cover. Identify the front and rear sections; the front typically has a more contoured shape to accommodate handlebars and mirrors.
- Position Cover: Begin by placing the front of the cover over the motorcycle's handlebars and front wheel.
Image: The motorcycle cover effectively shields the bike from adverse weather conditions like hail and snow.
Operating Instructions
- Apply Cover: Gently pull the cover over the entire motorcycle, working from front to back, ensuring it fully covers all parts down to the ground.
- Secure Elastic Edges: The cover features elasticated hems. Ensure these are snugly fitted around the bottom of the motorcycle for a secure fit.
- Fasten Buckles: Locate the windproof buckles and straps at the bottom and front of the cover. Fasten these securely to prevent the cover from being lifted or blown off by strong winds.
- Utilize Lock Holes: For added security, use an anti-theft lock (not supplied) through the metal lock holes located near the front wheel. This provides an additional layer of protection against theft.
Image: The cover's reflective strips enhance visibility, making the motorcycle easily noticeable both during the day and at night.
Maintenance
- Cleaning: To clean the cover, wipe it down with a soft, damp cloth using mild soap and water. Avoid using harsh detergents, bleach, or abrasive cleaners, as these can damage the material and its protective coatings.
- Drying: Always allow the cover to air dry completely before folding and storing. Storing a damp cover can lead to mold, mildew, and unpleasant odors.
- Storage: When not in use, fold the dry cover neatly and place it in the provided storage bag. Store the bag in a cool, dry place away from direct sunlight and extreme temperatures to prolong the cover's lifespan.
Image: This diagram illustrates the multi-layered construction of the cover, highlighting its sun protection, water resistance, insulation, and non-woven fabric lining, along with its anti-penetration, tear-resistant, wear-resisting, and waterproof qualities.
Troubleshooting
- Cover Not Staying Secure in Wind:
Ensure all elastic edges are properly positioned and snug around the motorcycle's base.
Verify that all windproof buckles and straps are securely fastened and tightened. - Condensation Under the Cover:
Condensation can occur due to temperature fluctuations. Ensure the motorcycle is dry before covering it.
On dry days, periodically remove the cover for a few hours to allow for air circulation and moisture evaporation. - Minor Tears or Abrasions:
For small damages, a waterproof repair patch kit designed for Oxford fabric can be used to extend the cover's life.
Image: The cover is designed for all-weather protection, effectively shielding the motorcycle from snow, rain, dirt, hail, intense sunshine, and bird droppings.
Specifications
| Brand | Generic |
| Model Number | ZL-US-Motorcycle Cover |
| Applicable Motorcycle Model | Benelli Tornado Naked Tre R160 |
| Material | Reinforced 4-layer hail protection (Oxford cloth and cotton) |
| Special Features | Anti-Hail, Breathable, Scratch resistant, Sun protection, Waterproof |
| UV Protection | 99% |
| Water Resistance Level | Waterproof |
| Fit Type | Vehicle Specific Fit |
| Item Weight | 3.96 pounds |
| Manufacturer | Zhonglian-US |
Image: This diagram illustrates the cover's seasonal protection capabilities: scratch-resistant, waterproof, and dustproof for spring; hail protector, UV proof, and heat insulation for summer; windproof and prevention of fallen leaves for autumn; and snowproof for winter.
What's in the Box
- 1 x Motorcycle Cover
- 1 x Storage Bag
Warranty and Support
For specific warranty details or product support, please refer to the seller's policy at the time of purchase or contact the manufacturer directly. It is recommended to retain your purchase receipt for any warranty claims or inquiries.
