LAUCO Portable Fuel Tank Instruction Manual

1. Safety Information

WARNING: Handling gasoline and diesel fuel can be dangerous. Always follow these safety precautions to prevent injury or property damage.

• Store fuel in a well-ventilated area, away from direct sunlight, heat sources, and open flames.
• Do not smoke or use ignition sources near the fuel tank.
• Always use the fuel tank outdoors or in a well-ventilated area.
• Keep out of reach of children. The tank features a child-resistant locking system.
• Avoid overfilling the tank. Leave space for fuel expansion.
• Ensure the cap is securely tightened after filling and before transport.
• Do not use the tank for liquids other than gasoline or diesel.
• In case of spills, clean immediately with absorbent materials and dispose of properly.
• Wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling fuel.

Figure 1: Child-resistant cap with thumb-release mechanism. This feature helps prevent unauthorized access to fuel.

2. Product Overview

The LAUCO Portable Fuel Tank (Model 87256) is designed for safe and convenient storage and transfer of gasoline and diesel fuels. Its robust construction and ergonomic design make it suitable for various applications, including boats, docks, farms, shops, and garages.

Key Features:

• Capacity: 3 Gallons (approximately 10 Liters) for convenient storage and transport.
• Safety Features: Child-resistant locking system and anti-spill design to prevent leaks and accidental access.
• Pouring Design: Wide-channel spout for smooth, controlled fuel transfer with minimal splashing.
• Ergonomic Handling: Comfortable grip handle for easy carrying and controlled pouring.
• Durable Construction: Made from High-Density Polyethylene (HDPE) with a cam-lock closure system for reliable, leak-free storage.

Figure 2: The LAUCO Portable Fuel Tank, highlighting its capacity markings.

Figure 3: The wide, easy-pour channel of the spout for smooth fuel flow.

3. Components

The LAUCO Portable Fuel Tank typically includes the following components:

• Fuel Tank Body (3 Gallon capacity)
• Transfer Hose with Nozzle
• Child-Resistant Cap
• Integrated Handle

Figure 4: Overview of the fuel tank, illustrating its durable design and key features like the spout and cap.

4. Setup

Before first use, inspect the fuel tank for any signs of damage. Ensure all components are present and securely attached.

1. Unpack: Carefully remove the fuel tank and all accessories from its packaging.
2. Inspect: Check the tank body, cap, and nozzle for cracks, leaks, or manufacturing defects. Do not use if damaged.
3. Attach Nozzle: Securely attach the transfer hose and nozzle to the tank's opening. Ensure a tight seal to prevent leaks.
4. Familiarize: Understand the operation of the child-resistant cap and the anti-spill pouring mechanism before filling.

5. Operating Instructions

5.1 Filling the Tank

1. Place the fuel tank on a flat, stable surface outdoors or in a well-ventilated area.
2. Unscrew the child-resistant cap by pressing down and turning counter-clockwise.
3. Insert the fuel pump nozzle into the tank opening.
4. Fill the tank slowly to avoid splashing. Do not fill completely; leave approximately 5% headspace for fuel expansion.
5. Remove the pump nozzle and securely re-attach the child-resistant cap, ensuring it clicks into place.
6. Wipe any spilled fuel immediately.

5.2 Dispensing Fuel

1. Ensure the receiving equipment's fuel tank is clean and ready for fuel.
2. Place the LAUCO fuel tank on a stable surface, ensuring it is higher than the receiving tank for gravity-assisted flow, if applicable.
3. Remove the child-resistant cap.
4. Position the nozzle into the receiving tank's opening.
5. To start pouring, press the thumb-release mechanism on the nozzle (refer to Figure 5).
6. Control the flow by adjusting the pressure on the release mechanism.
7. To stop pouring, release the thumb-release mechanism. The anti-spill design will stop the flow.
8. Once finished, remove the nozzle, and securely re-attach the child-resistant cap.

Figure 5: Anti-spill pouring mechanism. Press to pour, release to stop. Built-in dual catches prevent spills.

Figure 6: Demonstrating the ease of use when refueling with the LAUCO Portable Fuel Tank.

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your LAUCO Portable Fuel Tank.

• Cleaning: Periodically clean the exterior of the tank with a damp cloth. Do not use harsh chemicals that could degrade the plastic.
• Inspection: Regularly inspect the tank body, cap, and nozzle for any signs of wear, cracks, or damage. Replace any damaged components immediately.
• Storage: When not in use, store the fuel tank in a cool, dry, well-ventilated area, away from direct sunlight and heat sources. Ensure the cap is tightly sealed.
• Emptying for Long-Term Storage: If storing for an extended period, it is recommended to empty the tank of fuel and store it clean and dry. Dispose of fuel according to local regulations.

Figure 7: The robust construction of the LAUCO fuel tank is designed for long-lasting use.

7. Troubleshooting

8. Specifications

9. Warranty & Support

For warranty information or product support, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt for warranty claims.

Manufacturer: Lauco

Contact: Please visit the LAUCO Store on Amazon or the official LAUCO website for contact details.