Introduction
This manual provides essential information for the safe and effective use of your Moroxi 12V 1A Charger. This charger is designed to be compatible with specific EverStart Maxx and AVAPOW car jump starters. Please read these instructions carefully before use and retain them for future reference.
The Moroxi 12V 1A Charger features multiple protection mechanisms to ensure safe charging, including over voltage protection, short circuit protection, temperature protection, over load protection, over current protection, and over charge protection.
Product Overview
Image 1: Moroxi 12V 1A Charger showing its dimensions. The charging line is 1.5 meters (5 feet) long. The charger unit measures approximately 28mm (1.1in) in width, 40mm (1.6in) in depth, and 74mm (2.9in) in height.
Image 2: Detailed view of the Moroxi 12V 1A Charger components. It features a US standard plug, pure copper core wiring for efficient power transfer, an anti-oxidant connector for durability, and a radian buffer design for strain relief.
Image 3: The Moroxi 12V 1A Charger with its DC 5.5*2.1mm output jack and an included Type-C adapter, providing versatility for compatible jump starters.
Compatibility
This charger is specifically designed for the following jump starter models:
- EverStart Maxx: J7CCE, J7CE (800A / 800 Peak Amps models)
- AVAPOW: A08 (1500A), A18 (2000A), A28 (3000A), A58 (4000A), A68 (6000A)
Image 4: Visual representation of the Moroxi 12V 1A Charger connected to an EverStart Maxx J7CE jump starter. The charger uses a DC 5.5x2.1mm connector for these models.
Image 5: Visual representation of the Moroxi 12V 1A Charger connected to an AVAPOW jump starter. For AVAPOW models, the charger utilizes the included Type-C adapter.
Setup
- Identify the correct connector: The charger comes with a standard DC 5.5*2.1mm jack. If your jump starter (e.g., AVAPOW models) requires a Type-C connection, attach the provided Type-C adapter to the DC jack.
- Connect to the jump starter: Insert the appropriate connector (DC jack or Type-C adapter) into the charging port of your compatible jump starter. Ensure a secure connection.
- Connect to power outlet: Plug the charger's AC plug into a standard AC 100V-240V 50/60Hz wall outlet.
Operating Instructions
Once connected, the charger will begin charging your jump starter. The charger features an LED indicator light:
- Green Light: Indicates the charger is powered on and charging.
Allow sufficient time for your jump starter to fully charge according to its manufacturer's guidelines. The Moroxi charger incorporates safety features such as over-charge protection, which helps prevent damage to your jump starter from prolonged charging.
Maintenance
- Cleaning: Disconnect the charger from the power outlet and the jump starter before cleaning. Use a dry, soft cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
- Storage: Store the charger in a clean, dry place away from direct sunlight, extreme temperatures, and moisture. Keep it away from children and pets.
- Cable Care: Avoid bending or crimping the power cord excessively. Do not pull the cord to disconnect the charger; always grasp the plug.
Troubleshooting
Charger Not Working / No Indicator Light
- Check Power Outlet: Ensure the wall outlet is functional by plugging in another device.
- Check Connections: Verify that the charger is securely plugged into both the wall outlet and the jump starter.
- Verify Compatibility: Confirm that your jump starter model is listed as compatible with this charger. Incorrect compatibility can prevent charging.
- Inspect for Damage: Check the charger cable and connectors for any visible damage. If damaged, discontinue use and replace the charger.
Jump Starter Not Charging
- Confirm Charger Functionality: If the charger's indicator light is on, the charger itself is likely working. The issue might be with the jump starter's charging port or internal battery.
- Jump Starter Condition: Refer to your jump starter's manual for troubleshooting charging issues specific to that device.
The charger is equipped with multiple protection features (over voltage, short circuit, temperature, over load, over current, over charge protection) to prevent damage. If the charger stops working unexpectedly, these protections may have been activated due to an abnormal condition.
Image 6: Diagram illustrating the multi-protection features of the Moroxi 12V 1A Charger, including over voltage, short circuit, temperature, over load, over current, and over charge protection, ensuring safer charging.
Specifications
| Input | AC 100V-240V, 50/60Hz |
| Output | DC 12V, 1A |
| Power Cord Length | 5 feet (1.5 meters) |
| DC Jack Size | 5.5mm x 2.1mm |
| Included Components | 1 x Charger, 1 x Type-C Adapter |
| Product Dimensions (Charger Unit) | 1.5"D x 3.8"W x 3.7"H (approx. 3.8cm D x 9.6cm W x 9.4cm H) |
Warranty Information
Specific warranty details for this Moroxi product are not provided in this manual. Please refer to the product packaging or contact the retailer/manufacturer for information regarding warranty coverage and terms.
Customer Support
For technical assistance or inquiries regarding your Moroxi 12V 1A Charger, please contact the seller or manufacturer through the platform where the product was purchased. Ensure you have your purchase details and product model information available when contacting support.