Introduction
This manual provides essential instructions for the safe assembly, operation, and maintenance of your AZHAR G26 Foldable Electric Bike. Please read this manual thoroughly before your first ride to ensure optimal performance and safety. Keep this manual for future reference.
What's in the Box
Upon unpacking, verify that all the following components are included:
- Electric Bike x1
- Removable Battery x1
- Charger x1
- Tool Kit x1
Setup and Assembly
Your AZHAR G26 Foldable Electric Bike comes partially assembled. Follow these steps to complete the setup:
Step 1: Unpacking and Removing Protective Materials
Carefully remove the electric bike from its packaging. Use scissors to cut all zip ties and remove foam protectors from the frame, wheels, and other components.
Image: The AZHAR G26 electric bike as it appears when first removed from its shipping box, with protective packaging still attached.
Step 2: Handlebar and Stem Assembly
Insert the handlebar stem into the front fork tube. Secure it by tightening the quick-release lever and any associated bolts using the provided tools. Ensure the handlebars are aligned with the front wheel.
Image: A person adjusting the quick-release lever on the handlebar stem to secure it in place.
Step 3: Front Wheel Installation
Align the front wheel with the fork dropouts. Insert the axle bolt through the wheel hub and fork, then secure it with the provided nuts and washers. Ensure the disc brake rotor is correctly positioned within the brake caliper.
Step 4: Headlight Installation
Attach the headlight to the designated mounting point on the front fork or handlebar stem. Secure it with the appropriate screws and tools from the kit.
Step 5: Pedal Installation
Identify the left (L) and right (R) pedals. Thread the pedals into their respective crank arms. The right pedal threads clockwise, and the left pedal threads counter-clockwise. Tighten them firmly with a wrench.
Step 6: Seat Post and Saddle Adjustment
Insert the seat post with the saddle into the frame's seat tube. Adjust the height to a comfortable riding position and secure it using the quick-release clamp. Ensure the clamp is tight enough to prevent the seat from slipping.
Step 7: Brake Caliper Adjustment
Adjust the front and rear brake calipers to ensure proper clearance between the brake pads and the disc rotors. The pads should not rub against the rotor when the brakes are disengaged.
Assembly Video Guide
For a visual guide on the assembly process, please refer to the official video below:
Video: Official AZHAR Bike assembly guide for the F12 ebike model, demonstrating the unpacking and setup steps.
Operating Instructions
Powering On/Off and Display
To power on the bike, press and hold the power button on the handlebar display. The display will show your current speed, battery level, and selected speed mode. Press and hold the power button again to turn off the bike.
Image: The handlebar-mounted color LCD display, indicating speed and battery status.
Riding Modes
The AZHAR G26 offers three riding modes:
- Pure Electric Mode: Engages the motor via the throttle for propulsion without pedaling.
- Pedal Assist System (PAS) Mode: Provides motor assistance as you pedal, making riding easier.
- Bike Mode: Operates as a traditional bicycle, requiring full pedal power.
Switch between modes using the controls on the handlebar display.
Image: Visual representation of the three distinct riding modes available on the electric bike.
Battery Charging
To charge the battery, connect the charger to the charging port on the bike or directly to the removed battery. Plug the charger into a standard wall outlet. The charging indicator on the charger will show the charging status. A full charge typically takes 4-5 hours.
Image: The battery charging port and the process of connecting the charger.
Braking System
The bike is equipped with front and rear disc brakes for reliable stopping power. Always use both brakes simultaneously for effective and safe deceleration. The electronic brake system provides additional safety.
Image: Detail of the front disc brake mechanism.
Lighting
The integrated LED headlight and brake light enhance visibility and safety, especially during low-light conditions. Ensure they are functioning correctly before each ride.
Image: The LED headlight and brake light components.
Folding Mechanism
The bike features a quick-fold design for easy storage and transport. Follow the instructions in the assembly video to safely fold and unfold the bike. Ensure all locking mechanisms are securely engaged before riding.
Image: The folded electric bike fitting into a car trunk.
Safety Guidelines
- Always wear a helmet and appropriate safety gear when riding.
- Perform a pre-ride check before each use, including brakes, tire pressure, and battery level.
- Obey all local traffic laws and regulations.
- Do not ride under the influence of alcohol or drugs.
- Be aware of your surroundings and ride defensively.
- Avoid riding in adverse weather conditions or on slippery surfaces.
- Do not exceed the maximum weight capacity of 300 lbs.
Maintenance
- Regularly check tire pressure and inflate to the recommended PSI.
- Inspect brake pads and rotors for wear and replace as needed.
- Keep the chain clean and lubricated.
- Ensure all bolts and fasteners are tight.
- Clean the bike with a damp cloth; avoid high-pressure washing directly on electrical components.
- Store the bike in a dry, cool place, especially the battery.
Troubleshooting
If you encounter issues with your AZHAR G26 electric bike, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Low battery, loose battery connection, power button issue | Charge battery, ensure battery is securely seated, check power button connection. |
| Motor not assisting | PAS mode not selected, low battery, sensor issue | Select PAS mode on display, charge battery, inspect pedal assist sensor. |
| Brakes feel weak | Worn brake pads, loose brake cable, air in hydraulic system (if applicable) | Inspect/replace brake pads, tighten brake cable, consult a professional for hydraulic systems. |
| Unusual noises | Loose components, dry chain, rubbing brakes | Check all fasteners, lubricate chain, adjust brake calipers. |
If the problem persists, please contact AZHAR customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Name | G26 |
| Motor | 1200W Peak Motor (500W rated) |
| Max Speed | Up to 25 MPH |
| Battery | 48V 10Ah Lithium Battery |
| PAS Range | Up to 45 Miles |
| Tire Size | 14 Inches |
| Suspension Type | Dual Suspension |
| Brake Style | Disc Brakes (Front & Rear) |
| Frame Material | Alloy Steel |
| Max Load Capacity | 300 Pounds |
| Number of Speeds | 3 (Electronic Modes) |
Image: The AZHAR G26 electric bike, highlighting its key features and design.
Warranty and Support
AZHAR offers a 1-year warranty on the electric bike. Additionally, a 30-day return and exchange policy is provided. For any issues or support, please contact AZHAR customer service. When contacting support, please describe the problem and attach relevant pictures for quicker assistance.
It is recommended to keep the original ebike box for at least 1 month in case a return or exchange is necessary. Do not send the product back without prior contact to avoid lost packages.
For further assistance, please visit the AZHAR Store on Amazon.
