tomxcute Wireless Cat Water Fountain

1. Introduction

Thank you for choosing the tomxcute Wireless Cat Water Fountain. This automatic pet water dispenser is designed to provide fresh, filtered water for your cats, dogs, and multiple pets. Featuring a cordless design, smart water supply modes, and a multi-layer filtration system, it promotes healthy hydration for your companions.

Package Contents:

• 1 x Cat Water Fountain (Stainless Steel Basin)
• 1 x Detachable Water Pump
• 1 x Pump Sponge
• 3 x Filter Elements
• 1 x Cleaning Brush
• 1 x USB Charging Cable (for pump battery)
• 1 x User Manual

The tomxcute Wireless Cat Water Fountain is designed to encourage pets to drink more water, promoting better hydration and health.

2. Safety Instructions

• Ensure the fountain is placed on a stable, level surface.
• Do not immerse the main unit (stainless steel basin) or the pump's electrical components in water beyond the recommended cleaning procedures.
• Use only the provided USB charging cable for the pump battery.
• Keep out of reach of children.
• Regularly inspect the fountain for any damage or wear. Discontinue use if damaged.
• Ensure the water level is always above the minimum mark to prevent the pump from running dry.
• This product is for indoor use only.

3. Product Components

Familiarize yourself with the various parts of your tomxcute Wireless Cat Water Fountain:

The main components include the stainless steel basin, the pump unit with faucet, and the filter elements.

Detailed view of the multi-layer filtration system, including cotton, resin, activated carbon, and pre-filter sponge.

4. Setup Guide

Follow these steps to assemble and prepare your tomxcute Wireless Cat Water Fountain for first use:

1. Charge the Pump: Before initial use, fully charge the detachable water pump using the provided USB cable. The indicator light will show charging status.
2. Prepare the Filter: Rinse the new filter element under running water for a few minutes to remove any loose carbon dust.
3. Install Filter: Place the rinsed filter element into the filter holder on the pump unit.
4. Install Pump: Insert the pump unit into its designated slot in the stainless steel basin's lid. Ensure it is securely seated.
5. Fill with Water: Fill the stainless steel basin with clean water up to the MAX line. Do not overfill. The visual water level window helps monitor the water level.
6. Assemble Lid: Place the lid with the installed pump and filter onto the stainless steel basin.
7. Power On: Press and hold the power button on the pump unit to turn it on. Select your desired operating mode.

The fountain's design allows for easy cleaning and assembly.

Installation Video Guide:

5. Operating Modes

The tomxcute Wireless Cat Water Fountain offers three intelligent drinking modes:

• Sensor Mode: When a pet approaches within a 120° x 5ft range, the fountain will dispense water continuously for 15 seconds. This mode conserves battery life and encourages pets to drink when they are near.
• Timer Mode: The fountain will dispense water for 15 seconds every 15 minutes. This mode helps establish a regular drinking routine for your pets.
• Continuous Mode: Water flows continuously. This mode is only available when the fountain is plugged in via the USB cable, providing an uninterrupted water supply.

To switch between modes, short press the mode button on the pump unit. To power on/off, long press the power button.

The Smart Sensor Mode activates water flow when a pet is detected nearby.

The wireless design and efficient modes contribute to extended battery life.

6. Maintenance

Regular cleaning and filter replacement are crucial for maintaining water quality and extending the life of your fountain.

Cleaning the Fountain:

• Disassemble: Turn off the fountain and unplug it if in continuous mode. Remove the lid, pump unit, and filter.
• Clean Basin & Lid: Wash the stainless steel basin and lid with mild soap and water. Rinse thoroughly. The stainless steel material is dishwasher safe.
• Clean Pump: For a longer pump service life, it is recommended to clean the pump every 1 to 2 weeks.
1. Remove the pump cover.
2. Remove the impeller.
3. Clean the pump chamber and impeller with the provided cleaning brush.
• Clean Pump Sponge: Rinse the pump sponge thoroughly. Replace if heavily soiled or damaged.
• Reassemble: Ensure all parts are dry before reassembling.

Regular cleaning of all components, especially the pump and filter, is essential.

Filter Replacement:

For optimal water quality and pump performance, replace the filter element once every 2 weeks. Compatible filter elements can be found using ASIN: B0FJY6HDLG.

The multi-layer filter ensures fresh and clean water for your pets.

7. Troubleshooting

8. Specifications

• Model: TOM-WF-C02-P
• Capacity: 3.2 Liters (108 oz)
• Material: 304 Stainless Steel
• Power Source: Rechargeable Battery (1 A battery included) / USB Plug-in
• Dimensions: Approximately 8.82 inches (Diameter) x 7.6 inches (Height)
• Filtration System: 4-layer (Activated Carbon, Ion Exchange Resin, Non-woven Fabric, High-density Pump Sponge)
• Noise Level: Ultra-quiet (below 25dB)
• Smart Modes: Sensor Mode, Timer Mode, Continuous Mode
• Item Weight: 2 Pounds

The fountain's dimensions are designed for comfortable drinking posture for pets.

9. Warranty and Support

The tomxcute Wireless Cat Water Fountain pump comes with a 2-year free protection warranty. If you encounter any problems or have questions regarding your product, please do not hesitate to contact us. Our customer support team is available to assist you.

For further assistance, please refer to the contact information provided with your purchase or visit the tomxcute brand store on Amazon.