COFaR 67-inch Tall Metal Storage Cabinet with Glass Doors

Introduction

Thank you for choosing the COFaR 67-inch Tall Metal Storage Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new cabinet. Please read these instructions thoroughly before beginning assembly and retain them for future reference.

Safety Information

• Always use proper lifting techniques when assembling and moving the cabinet to prevent injury.
• Be cautious of pinch points during assembly, especially when attaching panels and doors.
• Always follow the assembly instructions provided step-by-step.
• Ensure the cabinet is placed on a level, stable surface to prevent tipping.
• Utilize the included anti-tip kit to securely fasten the cabinet to a wall, especially in households with children or pets.
• Do not overload shelves beyond their maximum weight capacity of 100 lbs per shelf.

Package Contents

Before assembly, verify that all components are present and undamaged. Refer to the parts list in your included physical instruction manual for specific component identification. The package typically includes:

• Metal panels (sides, top, bottom, back, shelves)
• Glass doors and solid doors
• Adjustable shelf clips
• Handles and magnetic door catches
• Assembly hardware (screws, bolts, etc.)
• Anti-tip kit

Assembly Instructions

For a detailed visual guide, please refer to the official installation video below. Ensure you have a screwdriver or power drill ready for assembly.

1. Unpack and Identify Parts: Carefully unpack all components and lay them out. Match each part to the corresponding letter or number in the instruction manual.
2. Assemble Base Frame: Connect the bottom panel (C) to one side panel (A) using screws (N). Ensure proper alignment.
3. Attach Second Side Panel: Connect the other side panel (B) to the bottom panel (C) using screws (N).
4. Install Crossbars: Secure the crossbars (J, M) between the side panels using screws (N) to reinforce the structure. Pay attention to the hole positions for correct placement.
5. Assemble Top Section: Attach the top panel (H) to the upper section of the side panels using screws (R).
6. Install Back Panels: Slide the back panels (G, E) into the designated grooves on the side panels. Secure with screws (N).
7. Insert Shelf Clips: Place the adjustable shelf clips (O) into the desired slots on the side panels. There are 12 clips for three adjustable shelves.
8. Place Adjustable Shelves: Carefully slide the adjustable shelves (I) onto the installed shelf clips.
9. Attach Doors: Install the magnetic catches (Q) to the cabinet frame. Attach the doors (K) to the cabinet using hinges and secure them.
10. Install Handles: Attach the handles (T) to the doors using screws (U).
11. Secure with Anti-Tip Kit: For safety, attach the anti-tip kit to the top of the cabinet and secure it to a wall stud.

Image: Two installation methods for doors, allowing customization for left or right opening.

Features

• 6-Tier Storage Space: This narrow storage cabinet features two cabinets with doors and an open compartment, providing versatile storage.
• Adjustable Shelves: Three adjustable shelves allow for customized interior space to accommodate items of various sizes. Each shelf supports up to 100 lbs.
• Unique Door Design: Doors can be configured to open to the left or right, offering flexibility for any space layout.
• Space-Saving Design: With dimensions of 11.8" D x 15.75" W x 67" H, it is ideal for small areas in bathrooms, living rooms, or other tight corners.
• Stable and Durable Construction: Made from metal with an environmentally friendly powder coating, ensuring protection against scratches and rust. Magnetic door catches provide quiet closure.

Image: Interior view highlighting adjustable shelves, anti-tip kit, and open compartments.

Operating Instructions

• Opening/Closing Doors: Gently pull the handle to open the door. Push the door firmly until the magnetic catch engages to close it securely.
• Adjusting Shelves: To adjust a shelf, first remove all items from it. Lift the shelf slightly and remove the four shelf clips (O) supporting it. Reinsert the clips into the desired slots at the new height, ensuring they are level and securely seated. Then, place the shelf back onto the clips.
• Loading the Cabinet: Distribute weight evenly on the shelves. Do not exceed the maximum weight capacity of 100 lbs per shelf. Place heavier items on lower shelves for better stability.

Maintenance

• Cleaning: Wipe the cabinet surfaces with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner. Avoid harsh chemicals that may damage the powder coating.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Rust Prevention: The cabinet features a rust-resistant powder coating. However, avoid prolonged exposure to excessive moisture to maintain its finish.

Troubleshooting

• Cabinet is Wobbly: Ensure all screws are tightened. Check that the cabinet is on a level surface. Adjust feet if applicable, or place shims under the base.
• Doors Not Closing Properly: Verify that the magnetic catches are correctly installed and aligned. Check hinges for proper attachment and adjustment.
• Difficulty Adjusting Shelves: Ensure shelf clips are fully inserted into the slots. Do not force shelves; if they are stuck, recheck clip placement.

Specifications

Image: Detailed dimensions and shelf capacity of the cabinet.

Warranty and Support

COFaR products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or contact COFaR customer support directly. If you encounter any issues or have questions regarding assembly, operation, or parts, please reach out to our professional after-sales service team.

Image: Professional After-Sales Service for technical assistance and installation support.