WNSNOU 16-Inch Under Cabinet Light Instruction Manual

1. Safety Information

Please read all instructions carefully before installation and use. Keep this manual for future reference.

• Ensure the power supply is disconnected before installation or maintenance.
• This product is designed for indoor use only.
• Do not expose the light to direct water spray or immerse it in water. It is moisture resistant, not waterproof for submersion.
• Use only the provided power adapter and accessories.
• Do not attempt to disassemble or modify the light fixture.
• Keep out of reach of children.

2. What's Included

Verify that all components are present before beginning installation:

• 1 x WNSNOU Under Cabinet Light (16 inch)
• 1 x Remote Control
• 1 x Wireless Wall Switch (Control Panel)
• 1 x 6.5FT Switch Plug Cable
• 2 x Double-sided Tape for Light
• 2 x Double-sided Tape for Wall Switch
• 2 x Hardware Clips for Light
• 4 x Screws
• 4 x Wall Plugs
• 1 x Instruction Manual

Image: All components included in the WNSNOU under cabinet light package, including the light bar, remote, wireless switch, power cable, mounting hardware, and double-sided tape.

3. Setup & Installation

3.1. Power Connection

Connect the 6.5-foot switch plug cable to the under cabinet light. Plug the power cable into a standard electrical outlet.

Image: The WNSNOU under cabinet light connected to its power plug, ready for use.

3.2. Wireless Control Panel Setup

The wireless control panel requires a coin cell battery (not included). Open the back of the panel, insert the battery, and close it. The panel can be mounted using the provided double-sided tape.

3.3. Light Mounting Options

The under cabinet light offers two mounting methods:

• Double-sided Tape: For quick and easy installation on smooth surfaces. Clean the surface, peel the backing from the tape on the light, and firmly press the light into place.
• Screw Fixing: For a more secure and permanent installation. Use the provided hardware clips, screws, and wall plugs. Mark the desired mounting location, drill pilot holes if necessary, secure the clips with screws, and then snap the light into the clips.

Image: Illustration showing both screw fixing with clips and double-sided tape as mounting options for the under cabinet light.

3.4. Pairing Control Devices

To pair the remote control or wireless wall switch with the light(s):

1. Ensure the light(s) are powered on.
2. Immediately after turning on the light, press and hold the "ON" button on the remote or wireless wall switch for 3 seconds.
3. The light will flash, indicating successful pairing.

To unpair a device:

1. Ensure the light(s) are powered on.
2. Immediately after turning on the light, press and hold the "OFF" button on the remote or wireless wall switch for 3 seconds.
3. The light will flash, indicating successful unpairing.

One remote or wall switch can control multiple lights. One light can be paired with up to two remote controls or wall switches.

Image: Diagram illustrating the code pairing and unpairing instructions for both the wireless control panel and the remote control.

4. Operation

The WNSNOU under cabinet light can be controlled using the included remote control or the wireless wall switch.

4.1. Basic Controls (ON/OFF)

• Press the "ON" button to turn the light on.
• Press the "OFF" button to turn the light off.

4.2. Brightness Adjustment (Dimming)

The light is 5%-100% dimmable.

• Press "M+" to increase brightness.
• Press "M-" to decrease brightness.

4.3. Color Temperature Adjustment

Adjust the color temperature from 3000K (warm white) to 6500K (cool white).

• Press "K+" to increase color temperature (cooler light).
• Press "K-" to decrease color temperature (warmer light).

Image: Visual representation of the adjustable color temperature range (3000K-6500K) and dimming capabilities (5%-100%) of the light.

5. Maintenance

To ensure optimal performance and longevity of your WNSNOU under cabinet light:

• Cleaning: Disconnect power before cleaning. Wipe the light fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Bulb Replacement: The LED light source is integrated and not user-replaceable.
• Battery Replacement: Replace the coin cell battery in the wireless control panel as needed.

6. Troubleshooting

If you encounter issues with your WNSNOU under cabinet light, refer to the following common problems and solutions:

If the problem persists, please contact WNSNOU customer support.

7. Specifications

8. Warranty & Support

8.1. Manufacturer Warranty

This WNSNOU product comes with a 3-year manufacturer's warranty.

8.2. Customer Support

For any questions, technical assistance, or warranty claims, please contact WNSNOU customer support through the retailer where the product was purchased or visit the official WNSNOU store on Amazon: WNSNOU Amazon Store.