VIANIS V8323-D2D Black Dusk to Dawn Outdoor Hanging Light

Important Safety Information

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.

• WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring.
• Ensure the fixture is securely mounted to a structural component of the building.
• Do not exceed the maximum wattage specified for the bulb (E26 socket, Max 100W).
• Handle glass components with care to prevent breakage.

Package Contents

Carefully unpack your new light fixture and lay out all parts on a clear area. Ensure all components are present before discarding packaging materials.

• Hanging Light Fixture (with seeded glass and aluminum frame)
• Adjustable Chain
• Mounting Canopy
• Mounting Hardware (screws, wire nuts, crossbar)
• Instruction Manual

Product Features

• Dusk to Dawn Sensor: This fixture includes a high-sensitivity photoelectric sensor that automatically turns the light on at dusk and off at dawn, providing energy-efficient operation.
  

  Image: The light fixture demonstrating its automatic on/off functionality based on ambient light levels.

• Durable All-Weather Construction: Crafted from die-cast aluminum, the fixture is designed for outdoor use, offering waterproofing, rust resistance, and corrosion protection against various weather conditions including rain, snow, wind, and sun.
  

  Image: The light fixture shown under simulated rain, highlighting its weather-resistant properties.

  
  

  Image: A comparison showing the robust die-cast aluminum construction of the VIANIS light versus a rusted, inferior quality fixture.

• Adjustable Height and Sloped Ceiling Compatibility: The suspension chain is adjustable up to 59 inches (150 cm), allowing customization of the pendant length. It is also compatible with sloped ceiling structures.
  

  Image: The light fixture mounted on a sloped ceiling, demonstrating its adaptability.

• E26 Standard Socket: Equipped with a standard E26 universal socket, supporting most bulb types (bulb not included) up to 100 watts.
  

  Image: Illustration of the E26 socket and examples of compatible bulb types.
• Seeded Glass Design: The seeded glass panels provide a rippled elegance and refract light beautifully, enhancing the fixture's vintage aesthetic.

Setup and Installation

Professional installation is recommended. If you are not familiar with electrical wiring, consult a qualified electrician.

1. Turn Off Power: Before starting any electrical work, ensure the power supply to the junction box is turned off at the circuit breaker or fuse box. Verify power is off using a voltage tester.
2. Prepare Mounting: Attach the mounting crossbar to the junction box using the provided screws.
3. Adjust Chain Length: Determine the desired hanging length for your fixture. Use two pliers to open a link on the chain and remove excess links to achieve the desired height. Route the electrical wires through every third link of the chain.
4. Wire Connections:
   • Connect the bare copper ground wire from the fixture to the green ground screw on the mounting crossbar, then connect it to the house ground wire.
   • Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box using a wire nut.
   • Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
   • Ensure all wire nuts are securely fastened.
5. Mount Canopy: Carefully tuck the wires into the junction box. Raise the canopy to the ceiling and secure it to the mounting crossbar with the provided screws or nuts.
6. Install Bulb: Insert an E26 base bulb (max 100W, not included) into the socket.
7. Restore Power: Turn the power back on at the circuit breaker.

For a visual guide, please refer to the official product video:

Operating Instructions

The VIANIS V8323-D2D outdoor hanging light features an integrated dusk-to-dawn sensor for automatic operation.

• Once installed and power is supplied, the sensor will detect ambient light levels.
• The light will automatically turn on when it detects low light conditions (dusk).
• The light will automatically turn off when it detects sufficient light conditions (dawn).
• Ensure the sensor is not obstructed by any objects or covered by direct artificial light sources, as this may interfere with its proper function.

Maintenance

• Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
• Bulb Replacement: Ensure power is off before replacing the bulb. The open-bottom design allows for easy bulb access. Use an E26 base bulb, not exceeding 100 watts.
• Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly.

Troubleshooting

Specifications

Image: Detailed dimensions of the light fixture, including adjustable wire length.

Warranty and Support

This VIANIS product comes with a 3-Year Limited Warranty, ensuring quality and reliability.

Image: ETL Listed certification and a 3-Year Warranty badge.

For technical assistance, warranty claims, or general inquiries, please contact VIANIS customer support through the retailer's platform or the official VIANIS website.