NEWBULIG NEW7261LEABG
NEWBULIG Wide Seat Armless Desk Chair (Model NEW7261LEABG) User Manual
Model: NEW7261LEABG | Brand: NEWBULIG
Important Safety Information
Always ensure the chair is on a stable surface and does not exceed the maximum weight capacity of 300 lbs. Use the adjustable height feature with caution to prevent injury.
Package Contents
Please verify that all components are present before beginning assembly.
- (A) Backrest: 1 unit
- (B) Seat Cushion: 1 unit
- (C) Mechanism: 1 unit
- (D) Gas Lift: 1 unit
- (E) Leg: 1 unit
- (F) Bolts: 4 units (for mechanism to seat cushion)
- (G) Bolts: 4 units (for backrest to mechanism)
- (H) Wrench: 1 unit
Assembly Instructions
Follow these steps to assemble your NEWBULIG Wide Seat Armless Desk Chair. An assembly video is provided for visual guidance.
Official assembly video for the NEWBULIG Home Office Chair (Model 7261). This video demonstrates the step-by-step process of putting the chair together, including attaching the gas lift, mechanism, seat cushion, and backrest.
- Insert Gas Lift: Insert the Gas Lift (D) into the center hole of the Leg (E). Ensure it is firmly seated.
- Attach Mechanism to Seat Cushion: Place the Seat Cushion (B) upside down. Align the Mechanism (C) with the pre-drilled holes on the underside of the seat cushion. Ensure the "FRONT" label on the mechanism aligns with the front of the seat cushion. Secure the mechanism using the four Bolts (F) and the provided Wrench (H). Tighten all bolts securely.
- Attach Backrest to Mechanism: Align the Backrest (A) with the mechanism's upright plate. Secure it using the four Bolts (G) and the provided Wrench (H). Tighten all bolts securely.
- Connect Seat Assembly to Gas Lift: Carefully align the center hole of the assembled seat (with mechanism attached) over the top of the Gas Lift (D). Press the chair down firmly until it is fully secured onto the gas lift.
Operating Instructions
Your NEWBULIG chair is designed for comfort and flexibility. Understand its features for optimal use.
Adjustable Height
To adjust the seat height, locate the lever on the right side beneath the seat. While seated, pull the lever up to lower the chair. To raise the chair, stand up slightly and pull the lever up. Release the lever at your desired height.
Image showing the height adjustment lever, indicating upward movement to raise and downward movement to lower the chair.
360° Swivel Function
The chair features a 360-degree swivel base, allowing for easy rotation without moving the entire chair. This is particularly useful in compact spaces or when needing to access different areas around your desk.
Image illustrating the 360-degree swivel capability of the chair, showing arrows indicating full rotation.
Rocking Mode
To engage the rocking mode, pull the height adjustment lever outwards. Push the lever inwards to lock the chair in an upright position. The chair allows for a gentle rocking motion of approximately 21 degrees for relaxation.
Image depicting the rocking function of the chair, showing a 21-degree tilt.
Maintenance
Proper care will extend the life and appearance of your chair.
- Cleaning: For general cleaning, wipe the chair with a damp cloth. For spot cleaning, use a mild soap solution and a soft cloth. Avoid harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all bolts and connections to ensure they are tight. Re-tighten if necessary.
- Surface Protection: Ensure the chair is used on a stable, level surface. The non-slip pads on the base help protect floors.
Troubleshooting
If you encounter any issues with your chair, refer to the following common solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not adjust height | Gas lift not engaged or faulty. | Ensure the height adjustment lever is pulled correctly. If the issue persists, contact customer support. |
| Chair feels unstable or wobbly | Loose bolts or uneven surface. | Check and tighten all assembly bolts. Ensure the chair is on a flat, stable surface. |
| Difficulty swiveling | Mechanism obstruction or wear. | Inspect the swivel mechanism for any obstructions. Ensure the chair is not overloaded. |
Specifications
Detailed specifications for the NEWBULIG Wide Seat Armless Desk Chair.
Diagram showing the dimensions of the NEWBULIG Wide Seat Armless Desk Chair, including width, depth, and height.
| Brand: | NEWBULIG |
| Model Name: | NEW7261LEABG |
| Color: | Beige-pu |
| Product Dimensions: | 26.4"D x 26"W x 32.5"H |
| Seat Width: | 25.98" |
| Seat Depth: | 19.68" |
| Adjustable Seat Height: | 14.96" to 18.7" |
| Maximum Weight Recommendation: | 300 Pounds |
| Style: | No Wheels (Sled Base) |
| Material: | Metal (Base), Foam (Fill), Leather (Fabric Type) |
| Item Weight: | 24.9 pounds |
| Special Features: | Adjustable Height, Back Support, Space Saving, 360° Swivel, Rocking Mode (21°) |
Warranty Information
Specific warranty details for your NEWBULIG chair may vary. Please refer to the product packaging or contact NEWBULIG customer support for precise warranty terms and conditions. Generally, products are covered against manufacturing defects for a limited period from the date of purchase.
Customer Support
For further assistance, questions, or to report any issues, please contact NEWBULIG customer support through the retailer where the product was purchased or visit the official NEWBULIG website for contact information.
Thank you for choosing NEWBULIG.