1. Introduction
Thank you for choosing the ICRGB 50W LED Outdoor Projector, model DJHW491. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED floodlight. Designed for outdoor use, this projector features 50W power, 6500K cool white light, and an IP66 waterproof rating, ensuring reliable performance in various weather conditions.
Please read this manual thoroughly before installation and keep it for future reference.
2. Safety Instructions
- Always disconnect power before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
- Ensure the power supply voltage matches the specifications of the projector (265V).
- Do not look directly into the LED light when it is operating, as it can cause eye strain or damage.
- Keep the projector away from flammable materials.
- The product is designed for outdoor use with an IP66 rating, protecting against dust and powerful water jets. However, do not submerge it in water.
- Do not attempt to open or modify the projector. There are no user-serviceable parts inside.
- Ensure the mounting surface is strong enough to support the weight of the projector.
3. Package Contents
Verify that all components are present and undamaged upon opening the package:
- 1x ICRGB 50W LED Outdoor Projector (Model: DJHW491)
- 1x Adjustable Mounting Bracket (pre-attached)
- Mounting Hardware (screws, anchors - typically included, but may vary)
4. Product Overview
The ICRGB 50W LED Outdoor Projector is a robust and efficient lighting solution for various outdoor applications. It features a compact design with a durable aluminum body and tempered glass lens, providing excellent heat dissipation and protection.
Figure 4.1: Product Dimensions and Features. This image illustrates the projector's dimensions (19.6 cm x 15.3 cm x 2.8 cm), its 6000K high brightness, 180° adjustable bracket, and 100 cm cable length.
Figure 4.2: Heat Dissipation and Durable Glass. The image highlights the rapid heat dissipation design on the back of the unit and the durable, impact-resistant glass protecting the LED array.
5. Installation
Follow these steps for proper installation:
- Choose a Location: Select a suitable outdoor location for mounting the projector. Ensure the surface is stable and can support the weight of the fixture. Consider the desired illumination area and cable length.
- Mark Drilling Points: Use the adjustable mounting bracket as a template to mark the drilling points on the wall or mounting surface.
- Drill Holes: Drill holes at the marked points. Insert appropriate wall anchors if necessary.
- Mount the Bracket: Secure the mounting bracket to the surface using the provided screws.
- Adjust Angle: Loosen the screws on the side of the bracket to adjust the projector's angle to your desired position. Tighten the screws firmly once the angle is set.
- Electrical Connection: This projector does not come with a plug and requires direct wiring. Connect the projector's wires to your main power supply (L, N, E) according to local electrical codes. Ensure all connections are secure and properly insulated to maintain the IP66 rating.
- Test: Restore power and test the projector.
Figure 5.1: Typical Installation and Illumination. This image demonstrates the projector mounted on a building, providing a 120° illumination area with 50W power and 6000K color temperature.
6. Operating Instructions
The ICRGB 50W LED Outdoor Projector operates simply:
- Once properly installed and wired to a power source, the projector will illuminate when power is supplied.
- Control the light using the wall switch or external timer connected to its power supply.
7. Maintenance
To ensure optimal performance and longevity of your LED projector, follow these maintenance guidelines:
- Cleaning: Periodically clean the tempered glass lens with a soft, damp cloth to remove dirt, dust, or debris that may obstruct light output. Do not use abrasive cleaners or harsh chemicals.
- Inspection: Regularly inspect the wiring and mounting bracket for any signs of damage, corrosion, or loosening. Tighten any loose screws.
- No User Serviceable Parts: Do not attempt to replace the LED chips or other internal components. The unit is sealed for IP66 protection.
8. Troubleshooting
If you encounter issues with your projector, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring connection Faulty switch/breaker | Check power source and circuit breaker. Verify all wiring connections are secure (ensure power is off first). Test the switch or replace if faulty. |
| Light flickers | Unstable power supply Loose wiring | Ensure stable power. Consult an electrician if power fluctuations persist. Check and secure all wiring connections. |
| Reduced brightness | Dirty lens Aging LED (unlikely for new product) | Clean the tempered glass lens with a soft cloth. If the issue persists, contact customer support. |
If the problem persists after attempting these solutions, please contact customer support.
9. Specifications
| Brand | ICRGB |
| Model Number | DJHW491 |
| Wattage | 50 Watts |
| Max Luminous Flux | 5000 Lumens |
| Color Temperature | 6500 Kelvin (Cool White) |
| Voltage | 265 Volts |
| IP Rating | IP66 (Waterproof and Dustproof) |
| Material | Aluminum, Tempered Glass, ABS Plastic |
| Finish Type | Powder Coated |
| Light Source Type | LED |
| Installation Type | Flush Mount |
| Mounting Type | Wall Mount, Adjustable Bracket |
| Power Source | Wired Electric (No Plug) |
| Product Dimensions (L x W x H) | 5 x 6 x 3 cm (or 19.6 x 15.3 x 2.8 cm from image) |
| Item Weight | 250 Grams |
| Compliant Specifications | CE, IP66, RoHS |
| Color (as per spec, visual may vary) | Pink |
Note: Product specifications are subject to change without prior notice.
10. Warranty and Support
For warranty information, technical support, or any questions regarding your ICRGB 50W LED Outdoor Projector, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for any warranty claims.