Introduction
This instruction manual provides essential information for the safe and effective use, setup, and maintenance of your TPE Silicone Full Body Companion. Please read this manual thoroughly before initial use and retain it for future reference.
Important Safety Information
- Material Safety: The companion is made from Thermoplastic Elastomer (TPE), which is body-safe. However, always inspect the product for any damage before and after each use.
- Hygiene: Maintain strict hygiene. Clean the companion thoroughly before and after each use as described in the "Maintenance" section.
- Storage: Store the companion in a clean, dry, and well-ventilated area, away from direct sunlight and extreme temperatures.
- Sharp Objects: Avoid contact with sharp objects, as they can damage the TPE material.
- Chemicals: Do not use harsh chemicals, alcohol-based cleaners, or petroleum-based lubricants, as these can degrade the TPE material. Use only water-based lubricants.
- Discretion: This product is intended for adult use only.
Package Contents
Verify that all items listed below are present in your package:
- Full Body Companion (small size)
- Blanket
- Underwear
- Vaginal Irrigator (Cleaning Tool)
- Cotton Gloves
- Instruction Manual (this document)
Figure 1: The companion is shipped in a discreet package to ensure privacy.
Setup
- Unpacking: Carefully remove the companion and all accessories from the packaging.
- Initial Cleaning: Before first use, thoroughly clean the companion according to the "Maintenance" section.
- Positioning: The companion features an internal metal skeleton with adjustable joints. This allows for various poses. Gently bend the limbs and torso to achieve desired positions. Avoid excessive force or bending joints beyond their natural range to prevent damage.
- Dressing: You may dress the companion with the provided underwear or other suitable clothing. Use the cotton gloves when handling to avoid leaving marks or dirt.
Figure 2: Illustration of the companion's adjustable joints and TPE material characteristics. The built-in 304 stainless steel frame supports 30 adjustable joints, allowing for various poses. The material is soft TPE, designed to feel realistic and close to human skin.
Operating Instructions
The companion is designed for intimate adult use. Its realistic features include lifelike skin texture, soft jelly breasts and buttocks, and 3D realistic passages.
- Lubrication: Always use a generous amount of water-based lubricant with the companion's passages to ensure comfort and prevent material damage.
- Poses: Utilize the adjustable joints to position the companion in various poses as desired. Ensure the companion is stable before use.
- Passage Design: The companion features intricate 3D realistic vaginal and anal passages with textured nodules for enhanced sensation.
Figure 3: Detailed view of the companion's 3D lifelike vaginal and anal structures. These passages are designed with internal textures for a realistic experience.
Maintenance and Care
Proper cleaning and maintenance are crucial for the longevity and hygiene of your companion.
- Cleaning Passages: Immediately after each use, thoroughly rinse the internal passages with warm water using the provided vaginal irrigator. Ensure all residue is removed.
- External Cleaning: Wash the external surface of the companion with mild soap and warm water. Gently wipe with a soft cloth.
- Drying: Pat the companion dry with a lint-free cloth. For internal passages, allow them to air dry completely. Ensure no moisture remains to prevent bacterial growth.
- Powdering: Once completely dry, apply a small amount of talcum powder or cornstarch to the companion's skin. This helps maintain its smooth, non-sticky texture and prevents dust accumulation.
- Storage: Store the companion in a clean, dry, and well-ventilated environment, away from direct sunlight, extreme temperatures, and dust. Keep it away from pets and children.
- Avoid Damage: Do not expose the companion to sharp objects, excessive heat, or corrosive substances.
Troubleshooting
This section addresses common concerns you might encounter.
- Sticky Surface: If the TPE surface becomes sticky, clean it thoroughly and reapply talcum powder or cornstarch as described in the "Maintenance" section.
- Odor: A new product may have a slight manufacturing odor. This typically dissipates after initial cleaning and airing out. Ensure proper ventilation during storage.
- Joint Stiffness: If joints feel stiff, gently manipulate them to loosen. Avoid forcing movements.
- Damage: For any significant damage (tears, punctures), contact customer support. Attempting repairs yourself may worsen the damage.
Specifications
| Feature | Detail |
|---|---|
| Name | Life-size female companion |
| Height | 3.30 FT (approximately 100 cm) |
| Weight | 28.6 LB (approximately 13 kg) |
| Bust/Waist/Hip | 23.6 / 11.8 / 23.6 inches (60 / 30 / 60 cm) |
| Material | Thermoplastic Elastomer (TPE) |
| Internal Structure | Metal Skeleton with Flexible Joints |
| Vaginal/Anal/Oral Depth | 4.75 / 4.75 / 3.15 inches |
| Water Resistance Level | Waterproof |
| Model Style | 3.30ft realistic doll / natural 40704 |
Warranty Information
Specific warranty details for this product are not provided in the available information. Please refer to the retailer's or manufacturer's website for any applicable warranty policies or contact their customer service directly for inquiries regarding product defects or issues.
Customer Support
For further assistance, questions, or concerns regarding your TPE Silicone Full Body Companion, please contact the seller or manufacturer through the platform where the purchase was made. Ensure you have your purchase details and product model number ready when contacting support.