Aopircs W006
Aopircs Rechargeable Hand Warmers
Model: W006
Instruction Manual
1. Introduction
Thank you for choosing the Aopircs Rechargeable Hand Warmers. This device is designed to provide consistent warmth and can also function as an emergency power bank. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.
Package Contents:
- 2 x Aopircs PalmGlow Hand Warmers
- 2 x USB Charging Cable
- 1 x User Manual
- 1 x Storage Pouch
Image 1.1: Aopircs Rechargeable Hand Warmers and packaging.
2. Safety Guidelines
To ensure safe operation and prevent damage, please observe the following safety precautions:
- Do not expose the device to extreme temperatures (above 124°F or below 42°F) or direct sunlight for prolonged periods.
- Avoid dropping or subjecting the device to strong impacts.
- Keep away from water and moisture.
- Do not attempt to disassemble, repair, or modify the device.
- Use only the provided charging cables or certified equivalents.
- Keep out of reach of children.
- The device contains a Lithium-Ion battery. Dispose of it responsibly according to local regulations.
Image 2.1: The hand warmers are UL Safety Certified, ensuring stable and safe heat output.
3. Product Overview
The Aopircs Hand Warmers feature a slim, ergonomic cylindrical design for comfortable grip and portability. Each unit is equipped with a power button, indicator lights, and USB ports for charging and power bank functionality.
Controls and Indicators:
- Power Button: Located at the top of each unit. Used for turning the device on/off and adjusting heat settings.
- Indicator Lights: Small LEDs near the USB ports indicate battery level and heat setting.
- USB-C Input: For charging the hand warmer.
- USB-A Output: For using the hand warmer as a power bank.
Image 3.1: The slim and portable design of the hand warmer.
4. Charging Instructions
Before first use, fully charge both hand warmers. A full charge takes approximately 3 hours with a 2A fast charger.
To Charge the Hand Warmers:
- Connect the provided USB-C charging cable to the USB-C input port on the hand warmer.
- Connect the other end of the cable to a compatible USB power source (e.g., wall adapter, computer USB port).
- The indicator lights will show charging status. Once fully charged, the lights will indicate a full battery.
Image 4.1: Charging the hand warmers and using them as a power bank.
Video 4.1: This video demonstrates the charging process and the power bank functionality of the hand warmers.
5. Operating the Hand Warmers
The Aopircs Hand Warmers provide 360° heating and multiple temperature settings for customized comfort.
Power On/Off:
- To turn on, press and hold the power button for 3 seconds. The indicator lights will illuminate.
- To turn off, press and hold the power button for 3 seconds. The indicator lights will turn off.
Adjusting Heat Settings:
Once powered on, short press the power button to cycle through the three heat settings:
- Low: Approximately 109°F (43°C) - up to 8.5 hours of continuous heat.
- Medium: Approximately 119°F (48°C) - up to 6 hours of continuous heat.
- High: Approximately 124°F (51°C) - up to 4 hours of continuous heat.
Image 5.1: The 360° all-around heating capability of the hand warmers.
Image 5.2: Different heat modes for various scenarios.
Power Bank Function:
Each hand warmer can serve as an emergency power bank. Connect your device's charging cable to the USB-A output port on the hand warmer to charge your phone or other USB-powered devices.
6. Care and Storage
Proper care and storage will extend the life of your hand warmers.
- Cleaning: Wipe the surface with a dry, soft cloth. Do not use abrasive cleaners or immerse in water.
- Storage: When not in use, store the hand warmers in the provided storage pouch in a cool, dry place. The magnetic feature allows the two units to attach for convenient storage.
Image 6.1: The magnetic design for easy carrying and sharing.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Hand warmer not heating. | Device is off or battery is low. | Press and hold the power button for 3 seconds to turn on. Charge the device if the battery is low. |
| Hand warmer not charging. | Charging cable or power source issue. | Ensure the charging cable is securely connected. Try a different USB port or power adapter. |
| Battery life is shorter than expected. | High heat setting or frequent use of power bank function. | Lower the heat setting for longer duration. Reduce use of power bank function if extended heat is needed. |
8. Technical Specifications
| Feature | Specification |
|---|---|
| Model Name | W006 |
| Brand | Aopircs |
| Color | Black |
| Material | Acrylonitrile Butadiene Styrene, Aluminum, Metal |
| Battery Type | Lithium-Ion |
| Battery Capacity | 5000 Milliamp Hours (per unit) |
| Charging Time | Approximately 3 Hours (with 2A fast charge) |
| Low Temperature Rating | 109°F (43°C) |
| Medium Temperature Rating | 119°F (48°C) |
| High Temperature Rating | 124°F (51°C) |
| Item Weight | 0.15 Pounds (per unit) |
| Dimensions (L x W x H) | 5.24 x 5.12 x 1.38 inches (Package) |
| Reusability | Rechargeable |
| Power Source | Battery Powered |
9. Warranty and Customer Support
Warranty Information:
This product comes with a 1-Year Warranty.
Customer Support:
If you have any questions, concerns, or require assistance with your Aopircs Rechargeable Hand Warmers, please contact our customer support team:
- Email: support@aopircs.com (Example)
- Phone: 1-800-XXX-XXXX (Example)
- Website: www.aopircs.com (Example)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.