1. Product Overview
The LCTKJTP RGB LED Strip Lights provide versatile lighting with 16 million colors and 22 dynamic modes. These lights feature music synchronization, smart app control, and an infrared remote control. Designed for indoor use, they are suitable for various decorative applications.
2. What's in the Box
- Power Adapter x1
- LED Strip Lights x1 (100FT - 2 Rolls of 50ft)
- Controller x1
- IR Remote Control x1
- User Manual x1
3. Safety Information
- WARNING: Do not immerse in fire.
- This product is not a toy. Keep away from children.
- The age of 16 should use this product under adult supervision.
- Before installing or replacing the lamp, please cut off power supply.
- This product is not waterproof. Use indoors only.
- Ensure the installation surface is clean and dry before applying the strip lights.
4. Setup
- Prepare the Surface: Ensure the desired installation surface is clean, dry, and smooth for optimal adhesion.
- Connect Components:
This image illustrates the connection process. Connect the LED strip light to the IR controller, ensuring the arrows on the connectors align. Then, connect the IR controller to the power adapter. Finally, plug the power adapter into a wall outlet.
- Apply Strip Lights: Carefully peel off the adhesive backing from the LED strip and press it firmly onto the prepared surface. You can cut the strip along designated cutting lines (marked with a scissor icon) to fit specific lengths, but cut parts cannot be reused.
This image shows a segment of the LED strip light with a clear cutting line, indicated by a scissor icon, where the strip can be safely trimmed to length.
- Power On: Plug the power adapter into a standard electrical outlet. The lights should illuminate.
5. Operating Instructions
5.1 Dual Control Modes
The LED strip lights can be controlled via a smart app on your mobile device or the included IR remote control.
This image displays the two primary control methods: a smartphone running the dedicated app and a physical IR remote control, both capable of managing the LED strip lights.
5.2 Smart App Control
- Download the App: Scan the QR code provided in the packaging or search for the app name (usually indicated in the manual or packaging) in your device's app store.
- Connect via Bluetooth: Enable Bluetooth on your mobile device. Open the app, and it should automatically detect and connect to the LED strip lights.
- Control Features: Within the app, you can:
- Select from 16 million colors.
- Adjust brightness and speed of dynamic modes.
- Choose from 22 dynamic lighting modes.
- Set a timer for automatic on/off.
This image demonstrates the timer function, allowing users to schedule when the LED strip lights turn on and off, as shown on the accompanying smartphone app interface.
5.3 IR Remote Control
Point the IR remote control directly at the IR signal receiver connected to the LED strip lights to operate. The remote allows for basic color selection, brightness adjustment, and mode changes.
5.4 Music Sync Mode
The built-in microphone allows the lights to change color and rhythm in sync with music. Activate this mode via the app or remote control.
This image illustrates the music sync feature, where the LED strip lights dynamically change colors and patterns in response to the rhythm of music playing in the room.
6. Maintenance
- Cleaning: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use liquid cleaners or immerse in water.
- Storage: If storing the lights, ensure they are clean and dry. Roll them loosely to prevent damage to the strip or adhesive.
- Power Supply: Always use the provided power adapter. Using an incompatible adapter may damage the lights or pose a safety risk.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power, loose connection, faulty adapter. | Check power outlet, ensure all connections are secure (arrows aligned), try a different outlet. |
| Remote control not working. | Battery depleted, IR receiver blocked, remote out of range. | Replace remote battery (12V battery included), ensure clear line of sight to IR receiver, operate within close range. |
| App cannot connect to lights. | Bluetooth off, app not updated, lights already connected to another device. | Ensure Bluetooth is enabled, update the app, disconnect from other devices, restart lights and app. |
| Lights are dim or flickering. | Low power, faulty section of strip. | Check power adapter, ensure connections are solid. If a section is faulty, contact customer service. |
8. Specifications
- Product Type: RGB LED Strip Lights
- Input Voltage: AC110V-240V
- Working Temperature: -20°C to +45°C
- Length: 100 Feet (2 rolls of 50ft)
- Color: Multiple colors (16 million via app)
- Special Features: Animated, Blinking, Color Changing, Dimmable, Music Sync, Timer Function
- Control Method: App Control (Bluetooth), IR Remote Control
- Indoor/Outdoor Usage: Indoor Only (Not Water Resistant)
- Material Type: Acrylonitrile Butadiene Styrene
- Power Source: Corded Electric
- Batteries: 1 x 12V battery required for remote (included)
9. Warranty and Support
This product comes with a 12-month manufacturer's warranty. If you encounter any issues during installation, or if you receive defective items, or require replacements or refunds, please contact our customer service. Refer to the contact information provided in your product packaging or on the retailer's website for prompt assistance.