Introduction
This manual provides comprehensive instructions for the safe installation, proper operation, and routine maintenance of your Generic Modern Minimalist Art Wall Light, Model O-JH7G3EF1054. This wall light features a postmodern design with natural marble and wrought iron materials, suitable for various indoor lighting applications. Please read this manual thoroughly before installation and retain it for future reference.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation, servicing, or replacing bulbs. All wiring connections must be in accordance with local and national electrical codes. If you are not familiar with electrical wiring, consult a qualified electrician.
- Do not install near flammable materials.
- Ensure the mounting surface can safely support the weight of the fixture.
- This fixture is designed for indoor use only.
- Do not exceed the maximum wattage specified for the light bulbs.
- Handle marble components with care to prevent damage.
Package Contents
Verify that all components are present and undamaged before beginning installation.
- 1 x Wall Lamp Fixture (Marble and Wrought Iron)
- Mounting Hardware (screws, wall anchors, wire connectors)
- 2 x LED G4 Lamps
- 1 x Instruction Manual
Specifications
| Brand | Generic |
| Model Number | O-JH7G3EF1054 |
| Product Type | Wall Light / Wall Sconce |
| Color Options | Black, Gold (d) |
| Lampshade Material | Marble |
| Light Body Material | Wrought Iron |
| Light Bulb Interface | LED G4 (2 lamps) |
| Power | 0W-40W (Max 40W per lamp) |
| Voltage | 110V |
| Product Dimensions | 3.93 in (10 cm) diameter, 13.8 in (35 cm) high |
| Product Weight | Approximately 4000g |
| Lighting Area | 5~15 square meters |
| Certifications | 3C, CE, F, CTL Certification |
Setup and Installation
Tools Required: Phillips head screwdriver, flathead screwdriver, wire strippers, drill, pencil, measuring tape, safety glasses.
- Turn Off Power: Before starting, ensure the power supply to the installation area is completely turned off at the circuit breaker or fuse box.
- Prepare Mounting Location: Identify the desired location for the wall light. Use a pencil to mark the positions for the mounting screws based on the fixture's mounting bracket.
- Drill Pilot Holes: Drill appropriate pilot holes for the wall anchors (if required for your wall type) and mounting screws. Insert wall anchors if necessary.
- Attach Mounting Bracket: Secure the mounting bracket to the wall using the provided screws. Ensure it is firmly attached.
- Wire Connections: Carefully connect the electrical wires from the wall to the fixture's wires. Match the wires:
- Connect the Live (Black) wire from the wall to the Live wire of the fixture.
- Connect the Neutral (White) wire from the wall to the Neutral wire of the fixture.
- Connect the Ground (Green or Bare Copper) wire from the wall to the Ground wire of the fixture.
- Secure Fixture: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall and stable.
- Install Bulbs: Insert the two provided LED G4 lamps into their respective sockets within the fixture.
- Restore Power: Once the fixture is securely installed and all connections are checked, restore power at the circuit breaker. Test the light using your wall switch.
Image: Dimensions of the wall light, showing its height of 35cm (13.7 inches) and width of 10cm (3.9 inches).
Operating Instructions
Once properly installed and connected to a power source, the Generic Modern Minimalist Art Wall Light operates via your room's standard wall switch. Simply toggle the wall switch to turn the light on or off.
Maintenance
- Cleaning: To clean the fixture, ensure the power is turned off at the circuit breaker. Use a soft, dry cloth to gently wipe the wrought iron and marble surfaces. For stubborn marks on marble, a slightly damp cloth with mild soap can be used, followed by immediate drying with a clean, soft cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and marble.
- Bulb Replacement: If a bulb needs replacement, first turn off the power to the fixture at the circuit breaker. Carefully remove the old G4 bulb by pulling it straight out. Insert a new LED G4 bulb of the same type and wattage (max 40W) by pushing it gently into the socket. Restore power and test the light.
Image: Detailed view of the wall light, showcasing the natural marble pattern and the metallic frame.
Troubleshooting
| Problem | Possible Cause | Solution |
| Light does not turn on. | No power to the fixture. Bulb(s) not installed correctly or faulty. Loose wiring connection. | Check circuit breaker/fuse. Ensure wall switch is on. Verify bulbs are fully inserted and functional. Replace if necessary. Turn off power and check all wire connections. Consult an electrician if unsure. |
| Light flickers. | Loose bulb. Faulty bulb. Unstable power supply. | Turn off power and ensure bulbs are securely seated. Replace bulb. Consult an electrician to check household wiring. |
| Fixture is hot to the touch. | Incorrect bulb wattage. | Ensure bulbs do not exceed the maximum 40W rating. Use LED bulbs for lower heat output. |
Warranty and Support
For product support, warranty inquiries, or to report any issues, please contact the seller or manufacturer directly with your purchase details. Please refer to your purchase receipt for specific warranty terms and contact information.
Product Images
