1. Introduction
Thank you for choosing the NEDLATSDY Kebidumei Y12 Pro Motorcycle Helmet Intercom Headset. This device is designed to provide reliable wireless communication for motorcyclists, allowing for intercom conversations with another rider, hands-free phone calls, and music streaming. Please read this manual carefully before using the product to ensure proper operation and to maximize your riding experience.
2. Package Contents
Please check the package contents upon opening. If any items are missing or damaged, contact your retailer.
- Y12 Pro Intercom Unit (x2 for 2 Pcs set)
- Helmet Speakers (x2 sets)
- Microphone (x2, boom or soft wire)
- Mounting Clamp/Adhesive Base (x2 sets)
- USB Charging Cable (x2)
- User Manual
3. Product Overview
Familiarize yourself with the main components and controls of your Y12 Pro intercom unit.
Image 3.1: Front view of the Y12 Pro Intercom Unit. The unit features a '+' button, a '-' button, and a central button with a microphone icon, which typically serves as the multi-function/power button. A circular LED light ring is also visible.
- Multi-function Button (Microphone Icon): Power On/Off, Play/Pause music, Answer/End/Reject calls, Activate voice assistant.
- Volume Up Button (+): Increase volume, Next track.
- Volume Down Button (-): Decrease volume, Previous track.
- Charging Port: For connecting the USB charging cable.
- Headset Port: For connecting speakers and microphone.
- LED Indicator: Displays device status (charging, pairing, connected).
4. Setup and Installation
4.1 Charging the Device
Before first use, fully charge the intercom unit. Connect the USB charging cable to the charging port on the unit and to a USB power source (e.g., computer, USB wall adapter). The LED indicator will typically show red during charging and turn blue or off when fully charged. Charging time is approximately 2-3 hours.
4.2 Mounting to Helmet
Choose between the clamp mount or adhesive mount based on your helmet type and preference.
- Clamp Mount: Loosen the screws on the clamp. Slide the clamp between the helmet shell and the inner padding, ensuring it is securely fastened. Tighten the screws.
- Adhesive Mount: Clean the desired mounting area on the side of your helmet. Peel off the protective film from the adhesive base and firmly press it onto the helmet for at least 30 seconds. Allow 24 hours for the adhesive to fully cure before attaching the intercom unit.
Once the mount is secured, slide the Y12 Pro intercom unit onto the mount until it clicks into place.
4.3 Installing Speakers and Microphone
Open the helmet's inner padding. Attach the speakers to the ear pockets using the provided adhesive pads, ensuring they are centered over your ears. Position the microphone in front of your mouth, ideally on the left side, ensuring it is close enough for clear voice pickup but not obstructing your vision. Route the cables neatly under the padding and connect them to the headset port on the intercom unit.
5. Operating Instructions
5.1 Power On/Off
- Power On: Press and hold the Multi-function Button (Microphone Icon) for approximately 3 seconds until you hear a voice prompt and the LED indicator flashes blue.
- Power Off: Press and hold the Multi-function Button for approximately 5 seconds until you hear a voice prompt and the LED indicator turns off.
5.2 Volume Adjustment
- Increase Volume: Press the Volume Up (+) button.
- Decrease Volume: Press the Volume Down (-) button.
5.3 Bluetooth Pairing with Phone
- With the Y12 Pro unit powered off, press and hold the Multi-function Button for approximately 7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
- On your mobile phone, enable Bluetooth and search for available devices.
- Select "Y12 Pro" from the list of devices. If prompted, enter "0000" as the PIN.
- Once paired, the LED indicator will flash blue slowly, and you will hear a confirmation tone.
5.4 Intercom Pairing (Unit-to-Unit)
To establish intercom communication between two Y12 Pro units:
- Ensure both Y12 Pro units are powered off.
- On both units, press and hold the Multi-function Button for approximately 7 seconds until both units enter pairing mode (LED flashes red and blue alternately).
- Briefly press the Multi-function Button on one of the units. The units will search for each other.
- Once paired, the LED indicators on both units will flash blue slowly, and you will hear a confirmation tone.
5.5 Intercom Communication
- Start Intercom: After successful pairing, briefly press the Multi-function Button on either unit to initiate intercom communication.
- End Intercom: Briefly press the Multi-function Button again to end the intercom conversation.
5.6 Phone Call Functions
- Answer Call: Briefly press the Multi-function Button when an incoming call rings.
- End Call: Briefly press the Multi-function Button during a call.
- Reject Call: Press and hold the Multi-function Button for approximately 2 seconds when an incoming call rings.
- Redial Last Number: Double-press the Multi-function Button in standby mode.
- Activate Voice Assistant: Triple-press the Multi-function Button in standby mode (if supported by your phone).
5.7 Music Playback
Once paired with your phone, you can stream music.
- Play/Pause: Briefly press the Multi-function Button.
- Next Track: Press the Volume Up (+) button.
- Previous Track: Press the Volume Down (-) button.
6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the intercom unit. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place when not in use. Avoid extreme temperatures.
- Battery Care: To prolong battery life, charge the device at least once every three months if not used regularly. Do not expose the battery to fire or extreme heat.
- Water Resistance: The Y12 Pro is designed to be weather-resistant, but it is not fully waterproof. Avoid submerging the device in water.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery; Incorrect power-on procedure | Charge the device fully; Press and hold Multi-function Button for 3 seconds |
| Cannot pair with phone | Device not in pairing mode; Bluetooth off on phone; Too many paired devices | Ensure device is in pairing mode (red/blue flashing LED); Enable phone Bluetooth; Delete old Bluetooth connections on phone |
| Intercom not connecting | Units not in pairing mode; Out of range | Ensure both units are in intercom pairing mode; Move units closer (within 500m) |
| No sound from speakers | Volume too low; Speakers disconnected; Faulty speakers | Increase volume; Check speaker connection; Test with another headset if possible |
| Microphone not working | Microphone disconnected; Microphone positioned incorrectly | Check microphone connection; Ensure microphone is close to mouth and not blocked |
8. Specifications
- Model: Y12 Pro
- Bluetooth Version: 5.0 (Typical)
- Intercom Range: Up to 500 meters (line of sight)
- Battery Type: Rechargeable Lithium-ion (Typical)
- Charging Time: Approximately 2-3 hours
- Standby Time: Up to 120 hours (Typical)
- Talk Time: Up to 8-10 hours (Typical)
- Operating Temperature: -10°C to 50°C (14°F to 122°F)
9. Warranty and Support
The NEDLATSDY Kebidumei Y12 Pro comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration. We are committed to providing exceptional customer support. If you encounter any issues or have questions regarding your product, please contact our support team through the retailer or the contact information provided with your purchase. We also offer a money-back guarantee, reflecting our confidence in product quality.