Product Overview
This Transwon Tempered Glass Screen Protector is designed to safeguard your Evermyth 10-inch tablet (models KB1001 and KB1004) and AUMI AI OS KB1001 10.1-inch tablet from scratches, impacts, and daily wear. It offers superior protection while maintaining the original clarity and touch sensitivity of your device's screen. The ultra-thin design ensures a natural viewing experience and smooth operation.
Each package includes two screen protectors, providing a convenient spare. The protector features 2.5D rounded edges for a comfortable grip and seamless integration, along with 9H hardness for robust defense against damage.
Image: Transwon Tempered Glass Screen Protector for Evermyth 10-inch Tablet. This image shows the screen protector itself and its packaging, highlighting its clear, protective nature.
What's in the Box
Your package should contain the following items:
- 2 x Transwon Tempered Glass Screen Protectors
- 1 x Dust-absorber
- 1 x Guide Sticker set
Installation Guide (Setup)
Follow these steps for a bubble-free installation:
- Clean the Tablet Screen: Use an alcohol wipe (not included, but recommended) to thoroughly clean the tablet screen. Ensure all smudges, fingerprints, and oils are removed.
- Dry the Screen: Use a clean, lint-free cloth (not included, but recommended) to dry the screen completely. Make sure no lint or dust particles remain.
- Remove Dust: Use the included dust-absorber sticker to gently dab the screen and pick up any remaining dust particles. This step is crucial for preventing bubbles.
- Align the Screen Protector: Carefully peel off the protective film from the adhesive side of the tempered glass. Hold the screen protector by its edges and align it precisely with your tablet's screen, paying attention to cutouts for cameras and sensors. The included guide stickers can assist in holding the protector in place for alignment.
- Apply the Protector: Once aligned, gently lower the screen protector onto the tablet screen. It will begin to adhere automatically.
- Remove Bubbles: If any bubbles appear, gently push them towards the edges of the screen using a soft cloth or a plastic card. Most small bubbles will disappear within 24-48 hours.
Tip: Perform installation in a dust-free environment to minimize airborne dust.
Usage (Operating)
Once installed, your Transwon Tempered Glass Screen Protector requires no special operation. It is designed to be fully transparent and maintain the original touch sensitivity of your tablet. You can use your tablet as usual, enjoying enhanced protection without compromising display quality or responsiveness.
Maintenance
To keep your screen protector clean and clear:
- Wipe the surface gently with a soft, lint-free cloth.
- For stubborn smudges, slightly dampen the cloth with water or a screen cleaner designed for electronics. Avoid harsh chemicals or abrasive materials.
- Do not apply excessive pressure when cleaning, as this could potentially damage the screen protector or the tablet screen underneath.
Troubleshooting
| Problem | Solution |
|---|---|
| Bubbles after installation | Small bubbles often disappear within 24-48 hours. For larger bubbles, gently lift the nearest edge of the protector and re-apply, pushing the bubble out with a soft cloth. Ensure the screen is dust-free before re-application. |
| Dust under the protector | This requires re-application. Carefully lift the protector, use a dust-absorber sticker to remove the dust from both the screen and the adhesive side of the protector, then re-apply. |
| Misalignment | If the protector is significantly misaligned, carefully lift it from one corner and re-align. If the adhesive is compromised, use the second protector provided. |
| Reduced touch sensitivity | Ensure the protector is fully adhered without air gaps. If the issue persists, it might be a rare compatibility issue, though this protector is designed for optimal touch response. |
Specifications
- Brand: Transwon
- Model Number: SMA0170-US1
- Material: Tempered Glass
- Item Hardness: 9H
- Special Feature: 9H Surface Hardness, 2.5D Rounded Edges
- Color: Clear
- Product Dimensions: 9.67"L x 5.93"W (24.56 cm x 15.06 cm)
- Item Weight: 7.4 ounces (209.79 grams)
- Compatible Devices: Evermyth 10 inch Tablet model KB1001, Evermyth 10 inch Tablet model KB1004, AUMI AI OS KB1001 10.1 inch Tablet
- Finish Type: Glossy
Warranty and Support
Specific warranty details for this product are not provided in the available information. Please refer to the official Transwon website or contact their customer support for comprehensive warranty information and assistance.
For further support or inquiries, you may visit the Transwon Store on Amazon or consult the manufacturer's official website.