Introduction
Thank you for choosing the GM Ultra Black Velvet Armless Dining Chairs. This manual provides essential information for the safe assembly, operation, and maintenance of your new chairs. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the chairs on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly, as this may damage the material.
- The maximum weight recommendation for each chair is 250 pounds. Do not exceed this limit.
- Keep small parts away from children during assembly.
- Regularly check and tighten all fasteners to ensure stability.
Parts List
Please verify that all components are included in your package before starting assembly.
- Chair Backrest (2)
- Seat Cushion (2)
- Gold Metal Legs (8)
- Hardware Pack (Screws, Washers, Allen Wrench)
- Assembly Instructions (This manual)
Setup and Assembly
Assembly is straightforward and typically takes 10-15 minutes per chair. All necessary tools are included.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface.
- Attach Legs to Seat: Align the gold metal legs with the pre-drilled holes on the underside of the seat cushion. Secure each leg using the provided screws and washers. Hand-tighten initially.
- Attach Backrest to Seat: Position the chair backrest against the rear of the seat cushion. Align the holes and secure with the remaining screws and washers.
- Final Tightening: Once all components are loosely assembled, gradually tighten all screws with the Allen wrench until secure. Do not overtighten.
- Check Stability: Gently rock the chair to ensure it is stable and all connections are firm. Adjust if necessary.
Image: Product dimensions and weight capacity. Overall Product Dimension: 17.5"L × 16.8"W × 38.2"H. Maximum Weight Recommendation: 250 Pounds.
Image: Two assembled chairs showcasing the design.
Image: Two assembled chairs from a different angle in a dining room.
Operating and Usage
These chairs are designed for use in dining areas, kitchens, home offices, living rooms, meeting rooms, or playrooms. Their ergonomic design provides balanced seating and support for extended periods.
- The velvet upholstery and high-density foam cushion offer a soft and comfortable seating experience.
- The gold metal legs provide stable support and feature non-slip feet to protect your floors.
Image: High-density sponge cushion for comfort.
Image: Ergonomic comfort demonstrated by a person sitting on the chair.
Image: Detailed view of the tufted backrest.
Image: Close-up of velvet texture and stud detailing.
Image: Close-up of the thick seat cushion.
Maintenance
- Cleaning Velvet Upholstery: Gently blot spills immediately with a clean, dry cloth. For general cleaning, use a soft brush or vacuum with an upholstery attachment to remove dust and debris. For deeper cleaning, use a mild upholstery cleaner following the product's instructions, testing on an inconspicuous area first.
- Cleaning Metal Legs: Wipe the gold metal legs with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Regular Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten as needed to maintain stability and safety.
- Floor Protection: The chairs are equipped with non-slip feet. Ensure these are clean and intact to prevent scratches on your flooring.
Troubleshooting
- Chair is wobbly:
- Ensure all screws are securely tightened. If the wobbling persists, loosen all screws slightly, sit on the chair to evenly distribute weight, then retighten all screws while seated.
- Difficulty with assembly:
- Review the assembly instructions carefully. Ensure you are using the correct hardware for each step. Do not force parts together; if they don't fit, re-check the orientation.
- Scratches on floor:
- Check the non-slip feet on the chair legs. If they are damaged or missing, contact customer support for replacements. Ensure the floor is clean before moving chairs to prevent debris from scratching the surface.
Specifications
| Feature | Detail |
|---|---|
| Brand | GM Ultra |
| Model Name | Dining Chair |
| Color | Black+Gold |
| Material | Metal, Velvet |
| Product Dimensions (L x W x H) | 17.5" x 16.8" x 38.2" |
| Seat Depth | 16 inches |
| Fill Material | Foam |
| Maximum Weight Recommendation | 250 Pounds |
| Style | Modern |
| Pattern | Solid |
| Finish Type | Velvet |
| Room Type | Apartment, Home Office, Living Room, Meeting Room, Playroom |
| Item Weight | 33 pounds (per set of 2) |
| ASIN | B0FWX8N645 |
| Date First Available | October 18, 2025 |
Product Video
Video: Overview of the Black Armless Dining Chairs, highlighting features like comfortable backrest, thick seat, and metal frame.
Warranty and Support
GM Ultra products are manufactured with quality and care. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For product support, missing parts, or any inquiries, please contact GM Ultra customer service through the retailer where the product was purchased or visit the official GM Ultra store online.
GM Ultra Store: Visit GM Ultra Store on Amazon