Oabduz 300W JPT MOPA Fiber Laser Marking Machine User Manual

1. Introduction

This manual provides essential information for the safe and effective operation of your Oabduz 300W JPT MOPA Fiber Laser Marking Machine. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper usage and prevent potential hazards. This machine is designed for precise marking and engraving on various metal and some non-metal materials.

2. Safety Instructions

WARNING: This product contains a Class 2 laser. Direct exposure to the laser beam may cause eye injury. Always wear appropriate laser safety glasses during operation.

• Ensure the machine is properly grounded before connecting to power.
• Do not operate the machine in wet or damp conditions.
• Keep the work area clear of flammable materials.
• Never look directly into the laser beam or at reflections from shiny surfaces without proper eye protection.
• Only trained personnel should operate and maintain this equipment.
• Disconnect power before performing any maintenance or adjustments.

3. Product Overview and Components

The Oabduz 300W JPT MOPA Fiber Laser Marking Machine is an air-cooled system featuring a 1064nm wavelength laser source. It includes a 200x200mm field lens and supports a D80 rotary axis for cylindrical objects.

Figure 3.1: Overview of the Fiber Laser Marking Machine and its key features including 24-hour support and 2-year warranty.

3.1 Key Components

• JPT MOPA Laser Source: Provides 300W laser power with adjustable pulse width (2-500ns) and frequency (1-4000kHz).
• Galvo Head (SINO-GALVO SG7110C): High-speed scanning system for precise marking.
• Field Lens: 200x200mm for a large marking area.
• D80 Rotary Axis: Optional accessory for engraving cylindrical items up to 80mm diameter.
• Workbench: Sturdy platform with multiple screw holes for securing workpieces.
• Control System: Integrated with EZCAD software for design and parameter control.

Figure 3.2: Detailed view of the marking ruler, rotating handle for height adjustment, dual red dot focusing system, and the robust workbench.

Figure 3.3: The SINO-GALVO SG7110C Galvo Head, illustrating its drive and scanning system for accurate and fast marking.

Figure 3.4: The BJJCZ Controller Board, responsible for stable motion and fast laser control.

Figure 3.5: Dimensions of the Oabduz 300W JPT MOPA Fiber Laser Marking Machine.

4. Setup

4.1 Unpacking and Placement

• Carefully remove all components from the packaging.
• Place the machine on a stable, level surface in a well-ventilated area.
• Ensure adequate space around the machine for operation and maintenance.

4.2 Assembly

• Attach the galvo head assembly to the main column, securing it with the provided fasteners.
• Connect all cables as indicated in the quick start guide (power, USB, rotary axis if applicable).
• If using the D80 rotary axis, mount it securely on the workbench and connect its cable to the designated port.

4.3 Power Connection

• Connect the power cable to the machine and then to a grounded 110V AC power outlet.
• Ensure the emergency stop button is disengaged (pulled out) before powering on.

5. Operating Instructions

5.1 Software Installation and Setup (EZCAD)

• Install the EZCAD software on your computer using the provided installation media or download from the official website.
• Connect the machine to your computer via the USB cable.
• Launch EZCAD. The software should detect the machine automatically.
• EZCAD supports various file formats including AI, PLT, DXF, JPG, PNG, and BMP.

Figure 5.1: EZCAD software interface, demonstrating its compatibility with various design and image file formats.

5.2 Focusing the Laser

The machine features a dual red dot positioning system to assist with focusing.

• Place your material on the workbench.
• Activate the red light preview function in EZCAD. Two red dots will appear on the material surface.
• Adjust the Z-axis (height) of the galvo head using the rotating handle until the two red dots converge into a single, sharp point. This indicates optimal focus.

Figure 5.2: Visual guide for using the dual red dot system and red light preview for accurate laser positioning and focusing.

5.3 Marking Parameters

Adjust parameters in EZCAD based on the material and desired marking effect:

• Power: Controls laser intensity. Higher power for deeper engraving.
• Speed: Determines how fast the laser moves. Slower speeds for deeper marks.
• Frequency: Affects the number of laser pulses per second. Important for material interaction and color marking.
• Pulse Width: Adjustable from 2ns to 500ns, crucial for high-contrast marking and achieving specific colors on stainless steel.

5.4 Starting a Marking Job

• Import or create your design in EZCAD.
• Set the marking parameters.
• Use the red light preview to verify the marking area on your material.
• Press the 'Mark' button in EZCAD to begin the engraving process.

6. Applications

This fiber laser marking machine is suitable for a wide range of applications on various materials.

6.1 Compatible Materials

• Metals: Gold, silver, stainless steel, aluminum, copper, brass, titanium, iron, and other metal alloys.
• Plastics: Hard plastics, ABS, PVC, etc.
• Ceramics: Certain types of ceramics.

6.2 Marking Capabilities

• High-Contrast Marking: Achieves clear and durable marks.
• Stainless Steel Color Marking: Capable of producing various colors on stainless steel by adjusting pulse width and frequency.
• Deep Engraving: Suitable for creating tactile marks.
• Fine Engraving: Ideal for intricate designs and small text.

Figure 6.1: Examples of various colors achievable on stainless steel by adjusting laser parameters.

Figure 6.2: Diverse engraving applications on materials such as silver, metal hardware, stainless steel, aluminum, copper, and ferrous metals.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your machine.

• Cleaning: Regularly clean the field lens and galvo mirrors with a soft, lint-free cloth and appropriate lens cleaning solution. Keep the workbench and machine exterior free of dust and debris.
• Air Circulation: Ensure the air vents on the machine are not obstructed to maintain proper air cooling.
• Environmental Conditions: Operate the machine within recommended temperature (0-40°C) and humidity ranges.
• Cable Inspection: Periodically check all cables for signs of wear or damage.

8. Troubleshooting

This section addresses common issues you might encounter.

If you encounter issues not listed here or require further assistance, please contact Oabduz technical support.

9. Specifications

Technical specifications for the Oabduz 300W JPT MOPA Fiber Laser Marking Machine.

Figure 9.1: Specifications table for Chinacnczone Fiber Laser Marking Machines, including the 300W model.

Figure 9.2: Detailed E2-M7 Series Laser Parameter Specifications, including output power, pulse repetition rate, and dimensions.

10. Warranty and Support

Oabduz provides comprehensive support for your laser marking machine.

• Warranty: The core components of this machine are backed by a 2-year manufacturer's warranty.
• Technical Support: Lifetime technical support is available. This includes remote assistance and guidance for setup and operation.
• Resources: Installation videos and detailed user manuals are provided to assist with your machine.

Figure 10.1: Examples of compliance and certification documents for the laser marking machine.