weselon 55-71 inch Extendable Rectangular Dining Table User Manual

Introduction

This manual provides essential information for the assembly, operation, and maintenance of your weselon 55-71 inch Extendable Rectangular Dining Table. Please read these instructions carefully before assembly and use to ensure safe and proper functionality. Keep this manual for future reference.

Safety Information

• Always assemble the table on a soft, clean surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the maximum weight capacity of 300 pounds.
• Keep small parts and assembly tools away from children.
• Avoid standing or sitting on the table.
• Use caution when extending or retracting the table to prevent pinching.

Setup and Assembly

Your weselon Extendable Rectangular Dining Table requires assembly. An assembly guide and installation tool are included in the packaging. Follow the step-by-step instructions provided in the included guide for proper assembly.

General Assembly Tips:

• Unpack all components and verify against the parts list in your assembly guide.
• Lay out all hardware and tools.
• Carefully observe the orientation of each piece as depicted in the diagrams.
• Do not fully tighten all screws until the entire structure is loosely assembled, then tighten them securely.
• It is recommended to have two people for assembly to ensure stability and ease of handling larger components.

Figure 1: Table Dimensions. This diagram illustrates the overall dimensions of the table in its compact (55.12 inches long) and extended (70.87 inches long) configurations, including height and width.

Figure 2: Design Features. This image showcases the smooth table corner design, the 1.18-inch thick tabletop, the elegant carved line design on the base, and the protective foot pads.

Operation: Extending and Retracting the Table

The weselon dining table features a smooth pull-out mechanism and a removable leaf, allowing it to easily transform from a compact size for 4-6 people to an extended size for up to 8 guests.

To Extend the Table:

1. Release Latches: Locate and loosen the latches positioned underneath the tabletop.
2. Pull Apart: Gently slide the two ends of the table outward, creating a gap in the center.
3. Insert Extension Leaf: Carefully place the extension leaf into the gap and position it securely in the center.
4. Push Inward: Push the table ends back together until they meet the extension leaf for a seamless finish.
5. Lock Latches: Fasten the latches underneath the tabletop to secure the extended configuration.

To Retract the Table:

1. Release Latches: Loosen the latches underneath the tabletop.
2. Pull Apart: Gently slide the two ends of the table outward to create a gap.
3. Remove Extension Leaf: Carefully lift and remove the extension leaf from the center. Store it safely.
4. Push Inward: Push the table ends back together until they meet.
5. Lock Latches: Fasten the latches underneath the tabletop to secure the compact configuration.

Figure 3: Extendable Tabletop Mechanism. This image provides a visual guide for extending the table, detailing the steps from releasing latches to securing the extension leaf.

Figure 4: Extension Mechanism Details. This close-up highlights the smooth track, fixed lock, noiseless sliding, and easy connection points of the table's extension system.

Figure 5: Flexible Dining Lengths. This image demonstrates the table's two adjustable lengths, showcasing its adaptability for different dining needs.

Maintenance and Care

Proper care will ensure the longevity and appearance of your dining table.

• Cleaning: Wipe the table surface with a damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Spills: The tabletop features a resin-coated surface that resists scratches, stains, and water. Wipe up spills immediately to prevent potential damage.
• Protection: Use coasters and placemats to protect the surface from hot items, scratches, and spills.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
• Stability: Periodically check all screws and connections to ensure they remain tight. Re-tighten as needed.

Figure 6: Water-Resistant Surface. This image shows water beading on the table's surface, illustrating its waterproof and easy-to-clean properties.

Troubleshooting

Table is Wobbly:

• Ensure all assembly screws are fully tightened.
• Verify that the table is placed on a flat, even surface. Adjust protective foot pads if necessary to level the table.
• Check that all components are correctly aligned according to the assembly instructions.

Difficulty Extending/Retracting:

• Ensure the latches underneath the tabletop are fully released.
• Check the sliding tracks for any obstructions or debris. Clean if necessary.
• Apply a small amount of silicone-based lubricant to the sliding mechanism if movement is stiff (avoid oil-based lubricants).

Surface Scratches or Stains:

• For minor scratches, furniture repair kits or markers designed for engineered wood may help.
• For stubborn stains, try a mild household cleaner on a soft cloth, testing on an inconspicuous area first.

Specifications

Warranty and Support

For warranty information or product support, please refer to the documentation included with your purchase or contact weselon customer service directly. Contact details can typically be found on the product packaging or the manufacturer's official website.