CROSSHIP B0FVK8L8XY

CROSSHIP Hitch Mount Hammock Stand and 5/8-Inch Trailer Hitch Pin Instruction Manual

Model: B0FVK8L8XY

Introduction

This manual provides detailed instructions for the safe and effective setup, operation, and maintenance of your CROSSHIP Hitch Mount Hammock Stand and the accompanying 5/8-Inch Trailer Hitch Pin. Please read all instructions carefully before use to ensure proper functionality and safety.

Safety Information

  • Always ensure the hitch mount hammock stand is securely installed in a standard 2-inch vehicle receiver (Class III, IV, and heavy-duty).
  • Do not exceed the maximum weight capacity of 350 lbs for the hammock stand.
  • Verify that the trailer hitch pin is fully engaged and secured before applying any load.
  • Inspect all components for damage or wear before each use. Do not use if any parts are compromised.
  • Ensure the vehicle is parked on a stable, level surface when using the hammock stand.

Package Contents

  • CROSSHIP Hitch Mount Hammock Stand (components for assembly)
  • CROSSHIP 5/8-Inch Trailer Hitch Pin
  • Parachute Nylon Hammock (blue/teal)
  • Storage Bag for Hammock Stand
  • Storage Bag for Hammock
CROSSHIP Hitch Mount Hammock Stand with blue and teal hammock, carry bag, and storage bag, shown with a vehicle in the background.

This image displays the complete CROSSHIP Hitch Mount Hammock Stand system, including the two-part stand, a blue and teal parachute nylon hammock, a small hammock storage bag, and a larger carry bag for the stand components. The stand is depicted attached to the rear hitch of a vehicle.

Setup Instructions

1. Installing the Hitch Mount Hammock Stand

  1. Ensure your vehicle has a standard 2-inch receiver hitch (compatible with Class III, IV, and heavy-duty hitches).
  2. Insert the main horizontal bar of the hammock stand into your vehicle's receiver hitch.
  3. Secure the horizontal bar using the provided CROSSHIP 5/8-Inch Trailer Hitch Pin. Refer to the hitch pin installation steps below.
  4. Attach the two vertical support arms to the horizontal bar. The stand is designed for easy assembly and disassembly.
  5. Once the stand structure is secure, attach the parachute nylon hammock to the designated points on the vertical support arms. Ensure the hammock is properly hooked and balanced. The stand is suitable for hammocks longer than 98 inches (approximately 250 cm).
CROSSHIP Hitch Mount Hammock Stand attached to the rear of an SUV, with text highlighting high-quality steel and aluminum, surface coating, and easy assembly/disassembly.

This image shows the CROSSHIP Hitch Mount Hammock Stand installed on the back of an SUV, near a body of water. Overlays describe its construction from high-quality steel and aluminum, its UV-resistant surface coating, and its easy assembly and disassembly for storage.

2. Installing the 5/8-Inch Trailer Hitch Pin

The CROSSHIP 5/8-Inch Trailer Hitch Pin features a clip-less design for quick and secure installation.

  1. Align the hitch pin with the receiver hole.
  2. Pull out the opening of the plug on the pin's end.
  3. Insert the pin through the receiver and hitch bar.
  4. Perform a 180-degree rotation of the knurled end to secure the pin in place. This action locks the pin without the need for additional clips.
CROSSHIP 5/8-Inch Trailer Hitch Pin, silver-colored with a knurled end.

A close-up view of the CROSSHIP 5/8-Inch Trailer Hitch Pin, featuring a durable silver finish and a knurled, rotating end for secure, clip-less installation.

Four-step visual guide for installing the CROSSHIP 5/8-Inch Trailer Hitch Pin, demonstrating its clip-less design.

A sequence of four illustrations demonstrating the simple, three-second installation process for the CROSSHIP 5/8-Inch Trailer Hitch Pin. It shows pulling out the plug opening, rotating 180 degrees, and securing the pin without the need for separate clips.

Operating Instructions

Using the Hammock Stand

  • Once the stand and hammock are securely installed, you may use the hammock for relaxation.
  • Ensure the combined weight of users does not exceed the 350 lbs capacity.
  • The stand is designed to accommodate hammocks of 114 inches or longer for optimal comfort.
Person relaxing in the CROSSHIP hammock stand attached to a vehicle, with text indicating suitability for 2-inch receivers and a 300-pound maximum capacity.

An image showing a person comfortably relaxing in the blue and teal hammock, which is suspended from the CROSSHIP Hitch Mount Hammock Stand attached to a vehicle. The stand is suitable for 2-inch receivers and has a maximum capacity of 350 pounds.

Person relaxing in the CROSSHIP hammock stand with a scenic mountain background, indicating hammock compatibility for 114 inches or longer.

A person is shown relaxing in the CROSSHIP hammock, which is attached to the hitch mount stand, with a beautiful mountain landscape in the background. The image notes that the stand can accommodate hammocks of 114 inches or longer.

Maintenance

Hitch Mount Hammock Stand

  • The stand features a durable coating designed to withstand ultraviolet radiation and harsh weather conditions, making it resistant to rust and damage.
  • Periodically clean the stand with a damp cloth to remove dirt and debris.
  • Inspect all connection points and structural components for any signs of wear, bending, or corrosion before each use.
  • Store the stand in its provided carry bag in a dry place when not in use to prolong its lifespan.

5/8-Inch Trailer Hitch Pin

  • The hitch pin is constructed from chrome steel, designed to be wear-resistant and durable.
  • Its water-resistant properties help protect it from rain and snow.
  • Keep the pin clean and free of excessive dirt or grime.
  • Ensure the rotating mechanism operates smoothly. If it becomes stiff, a small amount of lubricant can be applied.
CROSSHIP hitch pin and ball mount in use on a rainy day, emphasizing water-resistant properties.

A close-up view of a trailer hitch receiver with a ball mount and the CROSSHIP hitch pin installed, shown during rainy weather. The image highlights the pin's water-resistant properties, designed to withstand rain and snow.

Troubleshooting

  • Hammock Stand feels unstable: Ensure all connections are tight and the hitch pin is fully secured. Verify the vehicle is on a level surface.
  • Hitch Pin is difficult to insert/remove: Check for any debris in the receiver or on the pin. Ensure the rotating mechanism is clean and lubricated if necessary.
  • Hammock sags excessively: Confirm the hammock is correctly attached to both support arms. Ensure the total weight in the hammock does not exceed 350 lbs.

Specifications

CROSSHIP Hitch Mount Hammock Stand

  • Adapted Models: All standard 2-inch vehicle receiver attachments (Level III, IV, and heavy-duty).
  • Weight Capacity: 350 lbs.
  • Material: High-quality Steel and Aluminum.
  • Coating: Anti-UV radiation, wear-resistant.
  • Hammock Compatibility: Suitable for hammocks longer than 98 inches (250 cm).

CROSSHIP 5/8-Inch Trailer Hitch Pin

  • Pin Diameter: 5/8-Inch.
  • Receiver Compatibility: Fits 2, 2-1/2, or 3-Inch Receivers.
  • Material: Chrome Steel.
  • Feature: Clip-less design with rotating mechanism.
Diagram highlighting premium material selection for the CROSSHIP hitch pin, emphasizing durability, upgrade, and noiseless use.

This graphic illustrates the key features of the CROSSHIP hitch pin's material selection, including durable quality, newly upgraded design, extreme durability, and noiseless operation, all contributing to a new clip-less usage method.

Warranty and Support

Specific warranty information is not provided in the product details. For warranty claims or technical support, please contact CROSSHIP customer service through the retailer where the product was purchased or visit the official CROSSHIP brand store online.

© 2023 CROSSHIP. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.