Introduction
Thank you for choosing the Nintiue F1599 Modern Arc Dimmable LED Floor Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before assembly and operation, and retain them for future reference.
Safety Instructions
- Ensure the power is off before installation, cleaning, or replacing the bulb.
- Use only an E26 base dimmable LED bulb, maximum 60W. The included bulb is 9W LED (3000K, 1200 Lumens).
- Do not operate the lamp with a damaged cord or plug. If damaged, contact customer support.
- Keep the lamp away from water and moisture. This lamp is for indoor use only.
- Place the lamp on a stable, level surface to prevent tipping. The lamp features a weighted base for stability.
- Do not attempt to modify or disassemble the lamp beyond what is described in this manual.
- Keep out of reach of children and pets.
Package Contents
Please check that all components are present and undamaged:
- Lamp Base (Weighted)
- Lamp Pole Sections (Multiple, for assembly)
- Arc Arm with Lamp Head
- Fabric Lampshade (Champagne)
- E26 Dimmable LED Bulb (9W, 3000K, 1200 Lumens)
- Assembly Tool (e.g., Allen wrench, if required)
- Instruction Manual
Assembly Instructions
Follow these steps to assemble your Nintiue F1599 Floor Lamp:
- Carefully unpack all components and lay them out on a clean, flat surface.
- Attach the lowest lamp pole section to the weighted lamp base by screwing it clockwise until secure.
- Connect the remaining lamp pole sections one by one, screwing them clockwise until each connection is firm. Ensure the power cord passes freely through the pole.
- Attach the arc arm with the lamp head to the top pole section, screwing it clockwise until secure.
- Assemble the fabric lampshade. Typically, this involves attaching the fabric to the metal rings using Velcro or clips.
- Carefully place the assembled lampshade onto the lamp head and secure it with the provided ring or clips.
- Screw the included E26 LED bulb into the lamp socket clockwise until it is snug. Do not overtighten.
- Position the lamp in your desired location, ensuring the base is stable and the power cord is not pinched or a tripping hazard.
- Plug the lamp into a standard electrical outlet.
Image: Overview of Nintiue F1599 Floor Lamp components and general assembly process.
Image: Visual comparison highlighting the Nintiue lamp's features like dimmability and sturdy base.
Operating Instructions
Power On/Off and Dimmable Brightness
Your Nintiue F1599 lamp features a convenient knob dimmer switch located on the lamp pole:
- To turn the lamp ON/OFF, simply twist the knob.
- To adjust the brightness, rotate the knob clockwise to increase brightness (up to 100%) and counter-clockwise to decrease brightness (down to 0%). This stepless dimming function allows for precise light control.
Flexible Lampshade Adjustment
The lamp head is designed for flexible positioning:
- The lampshade can be rotated 360° horizontally to direct light across a wider area.
- It can also be adjusted 90° vertically, allowing you to angle the light for specific tasks like reading or to create ambient lighting.
Image: Demonstrates the stepless dimming function from 15% to 100% brightness using the knob switch.
Image: Shows the flexible lampshade with 360° horizontal and 90° vertical rotation capabilities.
Video: Demonstrates the dimmable function and adjustable lampshade of the Nintiue floor lamp.
Maintenance
- Cleaning: Unplug the lamp before cleaning. Wipe the lamp pole and base with a soft, dry cloth. For the fabric lampshade, use a lint roller or a soft brush to remove dust. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down. Unscrew the old E26 bulb counter-clockwise and replace it with a new E26 dimmable LED bulb (max 60W).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Not plugged in; power outlet issue; bulb loose or faulty. | Check power connection; test outlet with another device; tighten or replace bulb. |
| Light flickers. | Loose bulb; incompatible bulb; unstable power supply. | Tighten bulb; ensure dimmable LED bulb is used; check power source. |
| Dimming function not working. | Non-dimmable bulb used; faulty dimmer switch. | Replace with a dimmable LED bulb; contact customer support if switch is faulty. |
| Lamp is unstable. | Base not properly attached; placed on uneven surface. | Ensure pole sections are tightly screwed into the weighted base; move to a flat surface. |
Specifications
| Model Number | F1599 |
| Brand | Nintiue |
| Lamp Type | Modern Arc Dimmable LED Floor Lamp |
| Color | Matte Black-Champagne Shade |
| Product Dimensions | 10"D x 10"W x 65"H |
| Item Weight | 9.1 Pounds |
| Base Material | Metal (Weighted Marble Base) |
| Shade Material | Linen |
| Light Source Type | LED |
| Bulb Included | Yes (9W LED, 3000K Soft White, 1200 Lumens, 25,000 hrs lifespan) |
| Bulb Base | E26 (Max 60W) |
| Switch Type | Knob Dimmer Switch (0-100% Stepless) |
| Lampshade Adjustability | 360° Horizontal Rotation & 90° Vertical Rotation |
| Certifications | ETL Listed |
Warranty and Support
Nintiue proudly stands behind its products with a 3-year warranty. If your standing lamp has any defect or stops working within 3 years of purchase, please contact our customer support for troubleshooting assistance or a replacement product.
For customer service inquiries, please visit the Nintiue Store on Amazon or refer to the contact information provided with your purchase.
