Jasion YR20

Jasion YR20 Electric Bike User Manual

Model: YR20

1. Setup and Initial Assembly

The Jasion YR20 Electric Bike arrives 85% pre-assembled. The remaining assembly steps primarily involve attaching the handlebar, front wheel, front light, and pedals. Please follow the instructions below carefully.

1.1 Unboxing and Component Identification

Carefully remove the bike and all components from the packaging. Inspect all parts for any signs of damage during transit. Ensure all listed components are present.

Jasion YR20 Electric Bike components laid out after unboxing

Image: All components of the Jasion YR20 Electric Bike laid out after unboxing, including the main bike frame, front wheel, and accessories.

1.2 Assembly Steps

  1. Handlebar Installation: Attach the handlebar to the stem, ensuring it is centered and tightened securely.
  2. Front Wheel Attachment: Install the front wheel, aligning the disc brake rotor with the caliper. Secure the wheel using the quick-release mechanism or axle nuts.
  3. Front Light Mounting: Mount the front light to its designated position and connect any necessary wiring.
  4. Pedal Installation: Screw the pedals into the crank arms. Note that pedals are typically marked 'L' for left and 'R' for right, and the left pedal has a reverse thread.

For detailed visual guidance, refer to the assembly section of the product video.

Video: This segment demonstrates the unboxing and initial assembly steps for the Jasion YR20 Electric Bike, including attaching the handlebars, front wheel, and pedals.

2. Operating Instructions

The Jasion YR20 Electric Bike offers multiple riding modes and intuitive controls for a versatile riding experience.

2.1 Riding Modes

The bike features 4+1 riding modes:

  • Pedal Only Mode: Ride the bike like a traditional bicycle without electric assistance.
  • Pedal-Assist Mode (PAS): The motor provides assistance as you pedal. There are 5 levels of pedal assistance, allowing you to adjust the power output.
  • Throttle Only Mode: Engage the half-twist throttle to propel the bike without pedaling.
  • Walk-Assist Mode: Provides low-speed motor assistance to help push the bike when walking alongside it.
  • Cruise Control Mode: Maintain a constant speed without continuously holding the throttle.

2.2 Smart LCD Display

The integrated LCD display provides essential riding information and allows you to control various functions.

Jasion YR20 Electric Bike Smart LCD Display showing speed, battery, and PAS level

Image: Close-up of the Jasion YR20 Electric Bike's Smart LCD Display, showing current speed, battery percentage, and pedal-assist level indicators.

Key display features include:

  • Current Speed (MPH/Km/h)
  • Battery Percentage
  • PAS Levels (1-5)
  • Riding Data Record (Trip, ODO, Power, Time)
  • Cruise Control Indicator

2.3 Controls and Lighting System

The handlebars feature intuitive controls for safe and convenient operation.

Diagram of Jasion YR20 Electric Bike intuitive control system on handlebars

Image: Diagram illustrating the intuitive control system on the Jasion YR20 handlebars, highlighting the Smart LCD Display, Horn & Light Switch, Dual Hydraulic Brake Lever, 7-Speed Gear Shifter, and Throttle.

The bike is equipped with a full lighting system for visibility:

  • Front Light: Bright LED headlight for illuminating the path ahead.
  • Brake Light: Rear light that illuminates when brakes are applied.
  • Turn Signals: Integrated left and right turn signals for indicating direction changes.
Jasion YR20 Electric Bike lighting system showing front light, turn signals, and brake light

Image: Visual representation of the Jasion YR20 Electric Bike's safe and reliable lighting system, detailing the large front light, turn signal lights, and brake light.

3. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Jasion YR20 Electric Bike.

3.1 Battery Care

The bike features a removable 48V 20Ah (960Wh) Lithium-ion battery.

Diagram of Jasion YR20 Electric Bike removable lithium-ion battery

Image: Cross-section diagram of the Jasion YR20's 960Wh removable Lithium-ion battery, highlighting its large capacity and UL safety certification.

  • Charging: Use the provided 3A fast charger. A full charge typically takes 5-7 hours.
  • Storage: If storing the bike for an extended period, charge the battery every three months to maintain its health.
  • Precautions:
    • Prevent internal short circuits.
    • Do not disassemble the battery.
    • Do not immerse the battery in liquids such as freshwater, seawater, or drinks.
    • Do not expose the battery to fire.
    • Only use the special charger provided.

3.2 Tire Care

The bike is equipped with 20" x 4.0" puncture-resistant fat tires.

Jasion YR20 Electric Bike 20x4.0 all-terrain fat tires

Image: Close-up of the Jasion YR20's 20"x4.0" all-terrain fat tires, suitable for various surfaces including sand, city roads, snow, and mountains.

  • Regularly check tire pressure and inflate to the recommended PSI.
  • Inspect tires for wear, cuts, or embedded objects.

3.3 Brake System

The Jasion YR20 features dual hydraulic disc brakes with 180mm rotors.

Jasion YR20 Electric Bike dual hydraulic brakes diagram

Image: Diagram illustrating the dual hydraulic brakes of the Jasion YR20 Electric Bike, emphasizing their exceptional stopping power compared to mechanical brakes.

  • Periodically check brake pads for wear and replace as needed.
  • Ensure brake levers provide firm and consistent stopping power. If braking feels spongy, the hydraulic system may need bleeding by a qualified technician.

4. Troubleshooting

If you encounter any issues with your Jasion YR20 Electric Bike, please refer to the following general advice:

  • Bike Not Powering On: Check the battery connection and ensure the battery is charged. Verify the power button on the battery and display are pressed.
  • Motor Not Assisting: Ensure you are in a pedal-assist mode (PAS 1-5) or using the throttle. Check for any error codes on the LCD display.
  • Braking Issues: Inspect brake pads and rotors for wear or damage. If hydraulic brakes feel soft, professional service may be required.
  • General Malfunctions: If your bike stops working or you experience persistent issues, please contact Jasion customer support for assistance.

5. Specifications

Detailed technical specifications for the Jasion YR20 Electric Bike.

FeatureSpecification
Motor1000W Brushless (2000W Peak)
Battery48V 20Ah (960Wh) Removable Lithium-ion
Charger3A Fast Charger (5-7 hours charge time)
Max Speed32 MPH
RangeUp to 80 miles (in PAS mode)
Weight87 lbs
Load Capacity330 lbs
PAS Levels5 Levels
Tires20" x 4.0" Puncture Resistant Fat Tires
BrakesDual Hydraulic Disc Brakes (180mm Rotors)
SuspensionDual Suspension (Front Fork, Rear Shock)
GearingShimano 7-Speed with Half-Twist Throttle
LightingLED Headlight, Brake Light, Integrated Turn Signals
Frame MaterialHigh Carbon Steel
Wheel MaterialAlloy Steel
DisplaySmart LCD Display

5.1 Dimensions

Jasion YR20 Electric Bike dimensions diagram

Image: Diagram illustrating the key dimensions of the Jasion YR20 Electric Bike, including seat tube, chainstay, effective top tube, head tube, handlebar height, handlebar length, maximum seat height, wheelbase, wheel diameter, and total length.

6. Warranty Information

The Jasion YR20 Electric Bike comes with a 1-Year Limited Warranty. Please refer to the warranty documentation included with your purchase for full terms and conditions.

7. Support

For any questions, technical assistance, or warranty claims, please contact Jasion customer support:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.