Introduction
Welcome to your new GOFLAME Extendable Dining Table. This manual provides essential information for the safe assembly, proper operation, and effective maintenance of your table. Please read these instructions carefully before assembly and retain this manual for future reference.
Safety Information
- Read all instructions before assembly and use.
- Keep all small parts and packaging materials away from children.
- Assemble the table on a soft, clean surface to prevent scratches.
- Ensure all screws and bolts are securely tightened before use.
- Do not stand or sit on the table.
- Do not exceed the maximum weight capacity of 240 lbs (110 kg).
- Use caution when extending or retracting the table to avoid pinching fingers.
Package Contents
Please verify that all components are present before beginning assembly.
- Tabletop (Main sections)
- Extension Board
- L-shaped Legs (4 pieces)
- Hardware Pack (Screws, bolts, Allen wrench)
- User's Manual
Setup and Assembly
Follow these steps to assemble your GOFLAME Extendable Dining Table. It is recommended to have two people for assembly.
- Unpack all components and lay them out on a clean, soft surface to prevent damage.
- Identify the L-shaped legs and the main tabletop sections.
- Attach the L-shaped legs to the designated mounting points on the underside of the main tabletop sections using the provided hardware. Ensure all connections are reinforced and secure.
- Once the legs are securely attached, carefully turn the table upright.
- Ensure the table is stable and all connections are tight before proceeding.
Image: Detail showing the anti-slip foot pads, reinforced connection points, and the L-shaped design of the supporting legs.
Operating the Extension Mechanism
Your GOFLAME dining table features a smooth extension mechanism to easily adjust its length.
- To extend the table, gently pull the main tabletop sections apart towards the sides. The smooth sliding railings will guide the sections.
- Place the extension board into the gap created between the main tabletop sections. Ensure the board joints align properly.
- Push the main tabletop sections inward until they merge seamlessly with the extension board, creating a larger surface.
- To retract the table, reverse the process: pull the main tabletop sections apart, remove the extension board, and push the main sections back together.
Image: Visual guide demonstrating the three steps for extending the table: pulling the main sections apart, inserting the extension board, and pushing the sections back together to merge.
Image: A visual comparison showing the table at its compact 47-inch length, suitable for 4-6 chairs, and its extended 62-inch length, suitable for 6-8 chairs.
Maintenance and Care
Proper care will ensure the longevity and appearance of your dining table.
- Cleaning: Wipe the table surface with a soft, damp cloth. For spills, clean immediately to prevent staining. Avoid abrasive cleaners or harsh chemicals.
- Protection: Use placemats or coasters to protect the surface from hot items, spills, and scratches.
- Tightening: Periodically check and tighten all screws and bolts to maintain stability.
- Environment: Avoid prolonged exposure to direct sunlight or extreme temperature changes, which can cause warping or fading.
Image: A close-up view of the table's veneered wood board, highlighting its waterproof, scratch-resistant, wear-resistant, and easy-to-clean features.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly. | Loose screws or uneven floor. | Check and tighten all assembly screws. Ensure the table is on a level surface. Adjust anti-slip foot pads if present. |
| Extension mechanism is stiff or not smooth. | Dust or debris in railings; misaligned sections. | Clean the sliding railings. Ensure the extension board is inserted correctly and aligned with the main tabletop sections. Apply a silicone-based lubricant if necessary (avoid oil-based). |
| Tabletop sections do not merge properly. | Misaligned board joints or obstruction. | Ensure the extension board is fully seated and the board joints are correctly aligned before pushing the main sections together. Check for any obstructions. |
| Missing parts or damaged components. | Manufacturing defect or shipping damage. | Contact GOFLAME customer support immediately for assistance. |
Specifications
- Brand: GOFLAME
- Model: 57828KC-GL
- Material: Engineered Board
- Product Dimensions (Unexpanded): 47" L x 28" W x 30" H (120 cm L x 70 cm W x 76 cm H)
- Product Dimensions (Expanded): 62" L x 28" W x 30" H (158 cm L x 70 cm W x 76 cm H)
- Weight Capacity: 240 lbs (110 kg)
- Seating Capacity: 4-6 (unexpanded), 6-8 (expanded)
- Color: Black
- Assembly Required: Yes
Image: Detailed product dimensions, including length (47" unexpanded, 62" expanded), width (28"), height (30"), weight capacity (240 lbs), and seating capacity (4-8 persons).
Warranty and Support
Your GOFLAME Extendable Dining Table is designed for durability and functionality.
- Returns: This product is eligible for a 30-day easy return policy. Please refer to your purchase platform for specific return instructions and conditions.
- Customer Support: For any questions regarding assembly, missing parts, or product issues, please contact GOFLAME customer support.
- Seller: GOLFLAME
- Seller Link: GOLFLAME Seller Information