Introduction
This manual provides detailed instructions for the safe and effective use of your Ellie Pro Baby Monitor. This device offers advanced monitoring features to help you keep a watchful eye on your baby. Please read this manual thoroughly before operation and retain it for future reference.
What's in the Box
Upon unboxing, ensure all components are present:
- Monitor (Parent Unit)
- Ellie Camera (Baby Unit)
- Power Adapter
- Charging Cable
- Wall Stick (Adhesive Mount)
- Stand
- User Manual
- 32GB SD Card (pre-installed in camera)

Setup
1. Charging the Devices
- Connect the power adapter to the Baby Unit (camera) and plug it into a power outlet.
- Connect the charging cable to the Parent Unit (monitor) and plug it into a power outlet.
- Ensure both units are fully charged before initial use for optimal battery performance. The Parent Unit features a 6000mAh battery for extended use.
2. Positioning the Baby Unit (Camera)
The Baby Unit can be placed on a flat surface or mounted using the provided accessories.
- Tabletop Placement: Place the camera on a stable, flat surface at a safe distance from the baby's reach.
- Crib Mounting: Use the flexible arm mount to securely attach the camera to the crib railing. Adjust the arm to achieve the desired viewing angle.
- Wall Mounting: Utilize the adhesive wall stick for mounting the camera on a wall. Ensure the camera is positioned to provide a clear view of the crib area.

3. Powering On and Pairing
- Press and hold the power button on both the Baby Unit and Parent Unit to turn them on.
- The units are pre-paired at the factory. They should automatically connect within a few seconds.
- A blue indicator light on the Parent Unit signifies a successful connection.
- This is a NO WiFi baby monitor, ensuring a secure, interference-free connection without reliance on home networks.

Setup Video Guide
Operating the Monitor
Live View and Navigation
- The 5-inch IPS 2K UHD resolution screen provides a clear, real-time view of your baby.
- Use the directional buttons on the Parent Unit to remotely pan (360°) and tilt the camera for comprehensive room coverage.
- Activate the 5x digital zoom function to observe subtle movements and facial expressions.

Advanced Monitoring Features (AI Functions)
Access AI functions via the menu button on the Parent Unit:
- Cry Alert & Cry Soothing: The monitor sends an alert when your baby cries. You can enable or disable automatic lullaby playback for soothing.
- Safety Zone Alert (Virtual Fence): Set a designated safe area. If your baby moves out of this zone, an alert will be sent to the Parent Unit.
- Sleep Tracking & Sleep Report: Monitor your baby's sleep patterns and receive daily sleep reports. This feature can be enabled or disabled based on preference.
- Moments Snap: The AI intelligently captures precious moments like smiles, laughter, or milestones. These are stored on the included 32GB SD card.
- 2-Way Talk: Press the microphone button on the Parent Unit to speak to your baby through the camera's speaker.
- ECO Mode: This power-saving mode extends battery life by turning off the screen while retaining monitoring functions and audible alerts.

24/7 Playback and Storage
- Continuous recording is stored on the included 32GB SD card, allowing for 7x24-hour playback.
- Review past footage directly from the Parent Unit without any subscription fees.

Maintenance
- Regularly clean the camera lens and monitor screen with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents.
- Ensure proper ventilation for both units to prevent overheating.
- Keep cables out of reach of children to prevent strangulation hazards.
Troubleshooting
- No Signal/Disconnection: Ensure both units are powered on and within the 1000ft signal range. Obstacles like thick walls can reduce range. Try moving the units closer or adjusting their positions.
- Poor Image Quality: Check the camera lens for dirt or smudges. Ensure adequate lighting for optimal night vision performance.
- Audio Interference/Feedback: Do not activate the monitor and camera in the same room, as this can cause electromagnetic interference or feedback loops.
- Battery Draining Quickly: Ensure the Parent Unit is fully charged. Utilize ECO mode to extend battery life when continuous screen display is not needed.
- AI Functions Not Working: Navigate to the AI Functions menu on the Parent Unit and ensure the desired features (e.g., Cry Detection, Sleep Monitoring, Virtual Fence) are enabled.
Specifications
| Feature | Detail |
|---|---|
| Model Name | Video Baby Monitor |
| Model Number | Pro F |
| Video Capture Resolution | 2K UHD |
| Screen Size | 5 inches |
| Battery Capacity (Parent Unit) | 6000mAh |
| Connectivity Technology | Wireless (No Wi-Fi) |
| Range | Up to 1000ft |
| Special Features | 2-Way Audio, Remote Pan-Tilt-Zoom (5x), Night Vision, Virtual Fence, Cry Alert, Sleep Tracking, Moments Snap, ECO Mode, 24/7 Playback |
| Storage | 32GB SD Card (included) |
| Power Source | Battery Powered |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 3.3 pounds |
| Product Dimensions | 4 x 4 x 4 inches |
Warranty and Support
Ellie Baby Pro stands by its product quality. We offer:
- 2-Year Replacement: For any manufacturing defects or malfunctions.
- 3-Year Quality Cover: Extended quality assurance for your peace of mind.
If you encounter any issues or have questions, please contact our customer support. We are committed to replying within 24 hours.
For further assistance, please visit the Ellie Baby Pro Store.