Onirap V12D Smart Toilet with Bidet: Instruction Manual

1. Introduction

Thank you for choosing the Onirap V12D Smart Toilet. This advanced toilet system integrates a bidet, heated seat, automatic flushing, warm water, air drying, and a night light for enhanced comfort and hygiene. Designed with ADA comfort height, it ensures ease of use for all individuals. This manual provides essential information for proper installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your smart toilet.

2. Safety Information

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Ensure the toilet is connected to a grounded electrical outlet (GFCI protected receptacle).
• Do not immerse the product in water or spray water directly onto electrical components.
• Disconnect power before performing any maintenance or cleaning.
• Do not allow children or individuals with reduced physical, sensory, or mental capabilities to operate the toilet without supervision.
• Use only as intended for personal hygiene.
• Avoid using abrasive cleaners or harsh chemicals that may damage the surface or internal components.

3. Package Contents

Verify that all components are present before beginning installation:

• Onirap V12D Smart Toilet Unit
• Mounting kit
• Remote control (main)
• Remote control (secondary/round)
• Sealing flange
• Three-way angle valve
• User Manual
• Positioning Template
• Spare Battery Compartment (requires 10 AA batteries for backup flush)

Image 1: All components included with the Onirap Smart Toilet, including the main unit, remote controls, mounting hardware, and manuals.

4. Specifications

Image 2: Detailed product dimensions for installation planning.

5. Setup and Installation

The Onirap V12D Smart Toilet is designed for easy DIY installation, fitting standard 12-inch rough-ins. Basic tools are required. A clear picture guide is included in the box.

1. Preparation: Ensure you have a standard 12-inch rough-in and a GFCI protected electrical outlet nearby. Turn off the main water supply.
2. Positioning: Use the provided positioning template to mark drill holes for the mounting kit.
3. Flange Installation: Install the sealing flange and secure it to the floor.
4. Toilet Placement: Carefully place the toilet unit over the flange, aligning it with the drain pipe.
5. Secure Toilet: Use the mounting kit to firmly secure the toilet to the floor.
6. Water Connection: Connect the three-way angle valve to your water supply and then to the toilet's water inlet. Ensure all connections are tight to prevent leaks.
7. Electrical Connection: Plug the toilet into the GFCI protected electrical outlet.
8. Battery Backup: Install 10 AA batteries into the spare battery compartment for basic flushing during power outages.
9. Test: Turn on the main water supply and check for any leaks. Test all functions of the toilet.

Image 3: Visual guide to the components required for easy installation.

6. Operating Instructions

The Onirap V12D Smart Toilet offers a range of features controlled via the remote control or integrated sensors.

6.1 Automatic Lid Opening and Closing

• The lid automatically opens as you approach the toilet.
• After use, the lid automatically closes softly.
• Adjustable sensor range ensures precise response in various bathroom sizes.

Image 4: The motion-sensing auto open and close feature for hands-free operation.

6.2 Heated Seat

• The heated seat offers 4 temperature levels: Off / 93°F / 99°F / 104°F.
• Adjust temperature using the remote control. The LED display shows the current seat temperature.

Image 5: Visual representation of the heated seat and its adjustable temperature levels.

6.3 Bidet Functions (Rear & Feminine Wash)

• Features instant-heating fresh-water system for steady warm water.
• Select Rear or Feminine Front wash using the remote control.
• Adjust water pressure (4 levels) and water temperature (4 levels) to your preference.
• The nozzle is self-rinsing for enhanced hygiene.

Image 6: Illustration of different bidet cleaning modes, including Hip Wash, Lady Care Wash, Moving Cleaning, and Nozzle Self-Cleaning.

6.4 Warm Air Dryer

• After bidet use, activate the warm air dryer for a comfortable, paper-free finish.
• Adjust air temperature using the remote control.

Image 7: Details on the soft and warm air drying function, highlighting efficiency and safety protections.

6.5 Automatic Flushing

• The toilet automatically flushes after you stand up.
• Features a powerful 1000g MaP flush for reliable waste removal, even with low home water pressure.
• Internal battery box allows for basic flushing during power outages.

Image 8: Diagram illustrating the 1000g MaP high-efficiency flush system with built-in tank and siphon jet.

6.6 Night Light

• A soft LED night light illuminates the bowl, guiding you during nighttime trips without harsh brightness.
• Can be turned on/off via the remote control.

Image 9: The smart night light feature, which automatically activates in dark bathrooms for guidance.

7. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and hygienic performance of your Onirap Smart Toilet.

• Cleaning the Exterior: Use a soft, damp cloth and mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive pads.
• Nozzle Cleaning: The bidet nozzle features a self-rinsing function after each use. For deeper cleaning, refer to the remote control for a manual nozzle cleaning cycle.
• Water Filter: The built-in water filter helps reduce sediment. Periodically check and replace the filter as recommended in the full user manual to maintain clean water for the bidet.
• Power Disconnection: Always disconnect the power supply before performing any extensive cleaning or maintenance.

8. Troubleshooting

If you encounter any issues, refer to the following common problems and solutions:

For further assistance, please contact Onirap customer support.

9. Warranty and Support

The Onirap V12D Smart Toilet comes with a 24-month after-sales support. Each unit is durability- and function-tested before shipping.

• Customer Support: Enjoy fast-response service when you send issue details, photos/video, and product code.
• Lifetime Support: Onirap is committed to providing lifetime support for its products.
• Parts Modularity: Designed with modular parts for easier servicing and replacement.

For detailed product information and installation instructions, please refer to the full PDF manual or contact customer support through the following channels:

1. Visit the product page on Amazon.com.
2. Click on the seller name "Onirap" to go to the contact page.
3. Click "Ask a question" and select the relevant topic to send a message.

Image 10: Guide on how to contact Onirap customer support via Amazon.