INSDRGN C14 PRO

INSDRGN C14 PRO 1300W Electric Scooter User Manual

Model: C14 PRO | Brand: INSDRGN

1. Introduction

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your INSDRGN C14 PRO 1300W Electric Scooter. Please read it thoroughly before your first ride to ensure optimal performance and safety.

The INSDRGN C14 PRO is designed for urban commuting and recreational riding, featuring a powerful 1300W peak motor, a 48V 13Ah lithium battery for extended range, and a comfortable ride with dual suspension. It is UL2849 certified for battery and electrical safety.

2. Safety Information

Always wear a helmet and appropriate safety gear when riding. Familiarize yourself with local regulations regarding electric scooter usage. Ensure all components are securely fastened before each ride.

3. Package Contents

Upon unboxing, please verify that all items listed below are present:

INSDRGN C14 PRO Electric Scooter and included accessories
Image: The INSDRGN C14 PRO Electric Scooter with its included accessories, such as the charger, pump, tool kit, and phone holder.

4. Setup and Assembly

Your scooter is approximately 80% pre-assembled. The following steps detail the final assembly process, which typically takes about 15 minutes.

4.1 Handlebar Installation

Loosen the gland screw of the folding riser to adjust the installation angle. Once adjusted, tighten the gland screw. Release the self-locking clamp of the handlebar, place the handlebar, and then tighten the clamp's screw. Adjust the handlebar angle and secure the clamp.

Video: Instructions on how to adjust the handlebar direction for the C14 PRO scooter.

4.2 Seat and Rear Rack Basket Installation

Insert the seat tube into the frame, ensuring the safety line is not exposed. Adjust the seat to your desired height and tighten the seat tube clamp. Loosen the four screws of the rear rack basket, install the basket, and then tighten the screws.

INSDRGN C14 PRO Electric Scooter with dimensions and folding mechanism
Image: The INSDRGN C14 PRO Electric Scooter, highlighting its folding capability and dimensions for easy storage and transport.

4.3 Front Fender and Front Wheel Installation

Loosen the screw and washer of the front fender. Use the nut and washer to connect and secure the front fender and the headlight. Install the spacers on the front axle in order, then insert the front axle into the front wheel. Install the spacer on the left side of the front axle. Install the front wheel and tighten the nuts on both sides. There may be some noise from the brake disc initially, which requires debugging. Loosen the two nuts of the front brake, adjust the position of the brake so the disc brake is centered, and then tighten the nuts.

Video: Step-by-step guide on how to install the front wheel of the C14 PRO scooter.

4.4 Kickstand Installation

Install the kickstand by securing it with the provided screws.

4.5 Function Testing

Turn the key clockwise to turn on the E-bike. Turn the key clockwise again to turn on the headlight. Please turn the accelerator to test whether the E-bike can run normally. Check if the brakes are working properly and if the bell is ringing.

Video: A general introduction to the INSDRGN Electric Scooter, demonstrating its features and basic operation.

5. Operating Instructions

The INSDRGN C14 PRO Electric Scooter offers a user-friendly experience with multiple modes and convenient features.

Detailed view of the 1300W Peak Power Brushless Motor of the INSDRGN C14 PRO Electric Scooter.
Image: Close-up of the 1300W Peak Power Brushless Motor, highlighting its power for speeds up to 20 MPH and 45° uphill capability.
Detailed view of the 48V 13Ah Lithium Battery of the INSDRGN C14 PRO Electric Scooter.
Image: Close-up of the 48V 13Ah Lithium Battery, providing up to 35 miles of range and 7 hours fast charging.
Detailed view of the 9-piece shock absorber system for comfortable riding on the INSDRGN C14 PRO Electric Scooter.
Image: The 9-piece shock absorber system ensures a comfortable riding experience by absorbing bumps.
Dual brake system and bright headlight for enhanced safety on the INSDRGN C14 PRO Electric Scooter.
Image: The dual brake system and bright headlight provide enhanced safety and visibility.
Integrated phone holder and USB charging port on the INSDRGN C14 PRO Electric Scooter.
Image: The integrated phone holder and USB charging port allow you to keep your device powered while riding.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your scooter. Always turn off the scooter before performing any maintenance.

6.1 Rear Tire Replacement

For detailed instructions on replacing the rear tire, please refer to the video below.

Video: Step-by-step guide on how to replace the rear tire of the C14 PRO scooter.

7. Troubleshooting

If you encounter any issues with your scooter, please refer to the following general troubleshooting tips. For more complex problems, contact customer support.

8. Specifications

FeatureSpecification
BrandINSDRGN
Model NameElectric Scooter With Seat
Color1300W 48V 13Ah - Black
Age Range (Description)Adult
Special FeatureAdjustable Seat, Foldable, Rechargeable, Smart Digital Display, Waterproof
Weight Limit330 Pounds
Product Dimensions50.39"L x 24.8"W x 40.94"H
Number of Wheels2
Wheel MaterialRubber
Frame MaterialHigh-Carbon Steel
Item Weight66.6 Pounds
Handlebar TypeAdjustable
Wheel TypePneumatic
Suspension TypeDual Suspension
Brake StyleDual Braking
Charging Time7 Hours
Maximum Distance Range35 Miles
Battery Capacity13 Amp Hours

9. Warranty and Support

Your INSDRGN C14 PRO Electric Scooter comes with a 12-month manufacturer's warranty. For any inquiries, technical assistance, or warranty claims, please contact our professional after-sales customer support.

Customer support contact information for INSDRGN products.
Image: Contact details for customer support, including phone and email, for any product-related assistance.

Related Documents - C14 PRO

PreviewVoyager Dash Charge Commuter Pro Electric Scooter User Manual
Comprehensive user manual for the Voyager Dash Charge Commuter Pro Electric Scooter, covering safety precautions, specifications, setup, controls, riding, app usage, and warranty information.
PreviewSUOTU G2 Pro Electric Scooter User Manual
Comprehensive user manual for the SUOTU G2 Pro electric scooter, covering setup, operation, maintenance, troubleshooting, and specifications.
PreviewNIU KQi3 Pro eScooter Quick Note and Riding Mode Guide
A quick note for NIU KQi3 Pro eScooter users covering safety, limited speed for new users, cruise control activation for Android and iOS, and switching between riding modes (E-Save, Sport, Pedestrian, Custom).
PreviewAMPD BROS ACE PRO E-Micromobility Vehicle Information and Safety Guide
Information standard for the AMPD BROS ACE PRO e-micromobility vehicle, covering specifications, local laws, and critical safety instructions for lithium-ion battery use, charging, and disposal.
PreviewCFE LFP 电池用户手册 - S Pro 系列
CFE S Pro 系列 LFP 电池的综合用户手册,涵盖安装、操作、安全注意事项、故障排除和保修信息。
PreviewGOTRAX APEX PRO Electric Scooter User Manual
Comprehensive user manual for the GOTRAX APEX PRO electric scooter, covering assembly, operation, charging, maintenance, and safety guidelines. Learn how to safely operate and care for your electric scooter.