ALEXNUTRE ALEXNUTRE20250922

ALEXNUTRE 7-Piece Extendable Dining Table Set User Manual

Model: ALEXNUTRE20250922

Introduction

Thank you for choosing the ALEXNUTRE 7-Piece Extendable Dining Table Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new dining set. Please read these instructions carefully before beginning assembly and retain them for future reference.

Safety Information

  • Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
  • Assemble the product on a soft, clean surface to prevent scratches.
  • Tighten all screws and bolts securely. Periodically check and re-tighten as needed.
  • Keep small parts away from children during assembly.
  • Do not stand or sit on the table during assembly.
  • Distribute weight evenly on the table surface.
  • The table features a corner guard design for safety.

Package Contents

Verify that all components listed below are included in your package:

  • 1 x Extendable Dining Table
  • 6 x Dining Chairs
  • Assembly Hardware Kit (screws, bolts, tools)
  • Instruction Manual
ALEXNUTRE 7-Piece Extendable Dining Table Set with 6 chairs

Image: The complete ALEXNUTRE 7-Piece Extendable Dining Table Set, featuring one table and six chairs, arranged in a dining room setting.

Specifications

FeatureDetail
Model NumberALEXNUTRE20250922
MaterialEngineered Wood (MDF Board) with Metal Frame
ColorWalnut
Table Dimensions (Contracted)47.2" (W) x 31.5" (D) x 30" (H)
Table Dimensions (Expanded)63" (W) x 31.5" (D) x 30" (H)
Chair Dimensions(Approximate) 15.7" (W) x 17.7" (D) x 33.5" (H) - based on image
Seating Capacity4-6 (Contracted), 6-8 (Expanded)
Item Weight128.3 pounds (Total Set)
WaterproofYes (MDF Board)
ExtendableYes
Dimensions of the ALEXNUTRE Extendable Dining Table and Chair

Image: Detailed dimensions for the dining table (contracted and expanded) and a single dining chair, illustrating width, depth, and height measurements.

Setup and Assembly

Follow these steps for proper assembly of your dining table set. It is recommended to have two people for assembly.

Table Assembly

  1. Unpack Components: Carefully remove all table parts from the packaging. Lay them out on a soft, clean surface to prevent damage.
  2. Attach Table Legs: Identify the table legs and the table top sections. Securely attach the legs to the designated mounting points on the table top using the provided hardware. Ensure all bolts are tightened evenly.
  3. Assemble Extension Mechanism: If the extension mechanism is not pre-assembled, follow the specific instructions in the hardware kit to integrate the smooth tracks and ensure they operate correctly.
  4. Connect Table Sections: Carefully align and connect the main table sections, ensuring the extension leaves can be smoothly inserted or retracted.
  5. Final Tightening: Once the table is fully assembled, double-check and tighten all screws and bolts to ensure stability.

Chair Assembly

  1. Unpack Chair Components: Remove all chair parts from the packaging.
  2. Assemble Chair Frame: Connect the chair legs and backrest frame using the provided hardware. Ensure the metal frame components are correctly oriented.
  3. Attach Seat and Backrest: Secure the seat panel and backrest slats to the assembled frame. The backrest is designed for ergonomic comfort.
  4. Install Non-slip Foot Pads: Attach the non-slip foot pads to the bottom of each chair leg to protect your floor and provide stability.
  5. Repeat for all Chairs: Follow the same steps for the remaining five chairs.
Detailed view of table construction features including reinforced steel structure, waterproof MDF, adjustable leg pads, and anti-bump design.

Image: Close-up views highlighting the reinforced steel structure, waterproof MDF board, adjustable leg pads, and anti-bump design features of the dining table.

Detailed view of chair construction features including solid metal frame, ergonomic backrest, anti-bump design, and non-slip foot pads.

Image: Close-up views illustrating the solid metal frame, ergonomic curved backrest, anti-bump design, and non-slip foot pads of the dining chairs.

Operation: Extending and Retracting the Table

The ALEXNUTRE dining table features an extendable design, allowing you to adjust its length to accommodate more guests.

To Extend the Table:

  1. Unlock Table Sections: Gently pull the two main table sections apart. The smooth track mechanism will guide the separation.
  2. Insert Extension Leaf: Place the extension leaf into the gap created between the two main table sections. Ensure it sits securely and aligns with the table surface.
  3. Push Sections Together: Push the main table sections back together until they fit tightly against the extension leaf. This will lock the table in its extended position.
  4. The extended table can comfortably seat 6-8 people.

To Retract the Table:

  1. Separate Table Sections: Gently pull the two main table sections apart, creating a gap.
  2. Remove Extension Leaf: Carefully lift and remove the extension leaf from the gap. Store it safely when not in use.
  3. Push Sections Together: Push the main table sections back together until they meet tightly, returning the table to its contracted size.
  4. The contracted table can comfortably seat 4-6 people.
Close-up of the extendable dining table mechanism, showing the smooth track for expansion and how sections fit tightly.

Image: A detailed view of the table's extension mechanism, illustrating the smooth track system for easy expansion and how the table sections fit together securely.

Comparison of the dining table before and after extension, showing seating capacity for 4-6 and 6-8 people respectively.

Image: A visual comparison demonstrating the dining table's appearance and seating capacity before extension (for 4-6 people) and after extension (for 6-8 people).

Illustration of space-saving feature, showing dining chairs fully placed under the table.

Image: An illustration demonstrating the space-saving design, where dining chairs can be fully tucked under the table when not in use.

Care and Maintenance

Proper care will ensure the longevity and appearance of your ALEXNUTRE dining set.

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the finish.
  • Spills: The MDF board is waterproof. Wipe up spills immediately to prevent staining or water damage.
  • Protection: Use placemats or coasters to protect the table surface from hot items, scratches, and spills.
  • Hardware: Periodically check and re-tighten all screws and bolts to maintain stability.
  • Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or warping.
  • Moving: When moving the table or chairs, lift them rather than dragging to prevent damage to legs and flooring.

Troubleshooting

This section addresses common issues you might encounter.

  • Issue: Table or chairs feel wobbly.

    Solution: Check all assembly hardware. Tighten any loose screws or bolts. Ensure the adjustable leg pads on the table are properly leveled on uneven surfaces.

  • Issue: Table extension mechanism is stiff.

    Solution: Ensure no debris is obstructing the tracks. Gently clean the tracks. Avoid forcing the mechanism; it should slide smoothly.

  • Issue: Scratches on the surface.

    Solution: While the MDF board is scratch-resistant, heavy or sharp objects can still cause damage. For minor scratches, furniture repair kits designed for engineered wood may be used. Always use placemats and coasters.

Warranty and Support

For warranty information or customer support regarding your ALEXNUTRE 7-Piece Extendable Dining Table Set, please refer to the documentation provided with your purchase or contact ALEXNUTRE customer service directly.

Manufacturer: ALEXNUTRE

Model Number: ALEXNUTRE20250922

Please have your model number and purchase date available when contacting support.