1. Introduction
Thank you for purchasing the Merax Extendable Dining Table Set for 6. This manual provides important information regarding the assembly, operation, maintenance, and safety of your new dining set. Please read this manual thoroughly before assembly and use, and retain it for future reference.
This set includes an extendable dining table, four upholstered chairs, and one upholstered bench, designed to comfortably accommodate six people. Its space-saving design allows the bench and chairs to slide under the table, making it ideal for various living spaces.
2. Safety Information
Please observe the following safety precautions to prevent injury and damage to the product:
- Read all instructions: Ensure you understand all assembly steps before beginning.
- Adult assembly required: Assembly should be performed by at least two adults.
- Use correct tools: Only use the tools provided or recommended in the assembly instructions.
- Check all fasteners: Periodically check and tighten all bolts, screws, and connectors to ensure stability.
- Weight limits: Do not exceed the specified weight capacities. The table supports up to 330 lbs, and each chair supports up to 250 lbs.
- Level surface: Assemble and use the dining set on a flat, level, and stable surface.
- Avoid standing on furniture: Do not stand on the table, chairs, or bench.
- Keep children away: During assembly, keep small parts away from children to prevent choking hazards.
- Proper lifting: Lift the furniture when moving it; do not drag it to prevent damage to legs or flooring.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 1 x Extendable Dining Table
- 4 x Upholstered Dining Chairs
- 1 x Upholstered Bench
- Hardware Pack (screws, bolts, washers, Allen wrench)
- Assembly Instructions Manual
Image: Overview of the Merax Extendable Dining Table Set, showing the table, four chairs, and one bench.
4. Assembly Instructions
Assembly typically takes approximately 30 minutes with two adults. Follow these steps carefully:
4.1. Table Assembly
- Unpack Components: Carefully remove all table components from the packaging and lay them out on a soft, clean surface to prevent scratches.
- Attach Table Legs: Secure the table legs to the tabletop using the provided bolts and Allen wrench. Ensure all connections are tight but do not overtighten.
- Install Support Beams: Connect any crossbeams or support structures between the legs as indicated in the specific diagram provided in your physical manual.
- Insert Extension Leaf: If the extension leaf is separate, slide it into the designated slot in the center of the table. Ensure it locks securely into place.
- Final Tightening: Once the table is fully assembled, gently flip it upright. Double-check and tighten all fasteners.
Image: Detail of the extendable table mechanism, showing the 18-inch removable leaf and smooth slide rails.
4.2. Chair Assembly
- Identify Parts: Separate chair backrests, seats, and legs.
- Attach Legs to Seat: Secure the front and back legs to the chair seat frame using the provided hardware.
- Attach Backrest: Connect the backrest to the seat assembly.
- Tighten All Fasteners: Ensure all bolts are securely tightened for stability. Repeat for all four chairs.
Image: Close-up of an upholstered dining chair, highlighting the 5.5-inch thick cushion and solid wood frame.
4.3. Bench Assembly
- Position Bench Seat: Place the upholstered bench seat upside down on a soft surface.
- Attach Bench Legs: Secure the four bench legs to the underside of the bench seat using the provided hardware.
- Final Tightening: Ensure all connections are firm.
Image: Detail of the padded long bench, showing its dimensions and comfortable fabric.
5. Usage and Operation
5.1. Extending the Table
To extend the table from 60 inches to 78 inches:
- Gently pull the two halves of the tabletop apart. The smooth slide rails will guide the movement.
- Insert the 18-inch removable leaf into the gap created.
- Push the tabletop halves back together until they are flush with the extension leaf and securely locked.
5.2. Retracting the Table
To retract the table to its compact size:
- Pull the tabletop halves apart to create a gap.
- Carefully lift and remove the 18-inch extension leaf. Store it safely.
- Push the tabletop halves back together until they meet, ensuring they are flush.
5.3. Space-Saving Feature
The chairs and bench are designed to slide conveniently under the table when not in use, optimizing space in smaller areas and reducing trip hazards.
Image: The Merax dining set with chairs and bench tucked under the table, demonstrating its space-saving design.
6. Care and Maintenance
Proper care will extend the life and appearance of your dining set:
- Cleaning Wood Surfaces: Wipe wood surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. Dry immediately with a clean cloth.
- Cleaning Upholstery: For upholstered chairs and bench, spot clean with a mild fabric cleaner as needed. Test on an inconspicuous area first. Do not saturate the fabric.
- Protect from Heat and Moisture: Use coasters and placemats to protect the tabletop from hot dishes and spills. Wipe up spills immediately.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to wood and fabric.
- Regular Inspection: Periodically check all bolts and screws and tighten them as necessary to maintain stability.
7. Troubleshooting
If you encounter any issues, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table/Chairs are wobbly | Loose fasteners; uneven floor. | Tighten all bolts and screws. Ensure the furniture is on a level surface. Use adjustable foot pads if available. |
| Extension leaf does not slide smoothly | Debris in slide rails; misaligned rails. | Clean the slide rails of any dust or debris. Ensure the rails are properly aligned during assembly. |
| Scratches on wood surface | Sharp objects; lack of protection. | Use furniture polish or wood repair markers for minor scratches. Always use placemats and coasters. |
8. Specifications
Detailed dimensions and specifications for the Merax Extendable Dining Table Set:
| Component | Dimensions (L x W x H) | Net Weight | Weight Capacity |
|---|---|---|---|
| Table (Extended) | 78.1'' L x 36'' W x 30.5'' H | 92.4 lbs | 330 lbs |
| Table (Compact) | 60.1'' L x 36'' W x 30.5'' H (approx.) | - | - |
| Chair (each) | 19'' L x 17.3'' W x 39'' H | 19.0 lbs | 250 lbs |
| Bench | 37.8'' L x 15.5'' W x 19.8'' H | 71.9 lbs | 250 lbs |
Material: MDF + Rubberwood
Color: Natural
Assembly Required: Yes
Image: Technical drawing showing detailed dimensions for the extendable table, dining chair, and bench.
9. Warranty and Support
Merax products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Merax website.
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Merax customer support. Contact details can typically be found on the packaging, the Merax website, or your purchase documentation.
Online Support: Visit the Merax Store on Amazon