Introduction
This manual provides instructions for the Generic HJH92S replacement remote control, designed for use with Saatva Lineal Plus Adjustable Bed Frames. This remote control is a pre-owned, thoroughly tested unit. Ensure that the buttons on this remote match your original remote exactly for proper functionality.
Setup
Battery Installation
The HJH92S remote control requires two AAA batteries (not included). Follow these steps to install or replace batteries:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover, sliding it back into place until it clicks securely.
Operating Instructions
Button Functions
Familiarize yourself with the functions of each button on your remote control:
| Button/Icon | Function |
|---|---|
| Light Icon | Activates or deactivates the under-bed light or remote backlight. |
| Padlock Icon | Locks or unlocks the remote control to prevent unintended adjustments. |
| HEAD Up/Down Arrows | Adjusts the head section of the bed upwards or downwards. |
| FOOT Up/Down Arrows | Adjusts the foot section of the bed upwards or downwards. |
| FLAT | Returns the adjustable bed to a completely flat position. |
| ZG (Zero Gravity) | Moves the bed to the pre-programmed Zero Gravity position. |
| SNORE | Adjusts the bed to a position designed to help reduce snoring. |
| SET | Used to program or save custom bed positions. Consult your bed frame's manual for specific programming steps. |
| MEM (Memory) | Recalls a previously saved custom bed position. |
| MASSAGE H+ / H- | Increases or decreases the intensity of the head massage function. |
| MASSAGE F+ / F- | Increases or decreases the intensity of the foot massage function. |
| WAVE | Activates or changes the massage wave pattern. |
| + / - (General) | These buttons may control overall massage intensity, duration, or other general settings depending on your bed frame model. |
Maintenance
Cleaning
To clean your remote control, gently wipe it with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the remote.
Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops working. Refer to the 'Battery Installation' section for detailed steps. Always use fresh AAA batteries and dispose of old batteries responsibly.
Troubleshooting
- Remote Not Responding:
- Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
- Ensure there are no obstructions between the remote and the bed frame's receiver.
- Verify that the remote is not in 'Lock' mode (check for the padlock icon).
- Intermittent Functionality:
- Weak batteries can cause intermittent operation. Replace them.
- Ensure you are within the effective range of the bed frame's receiver.
- Specific Buttons Not Working:
- If only certain buttons fail, ensure the remote is clean and free of debris that might obstruct button presses.
- If the issue persists after checking batteries and cleaning, the remote may require replacement.
Specifications
| Feature | Detail |
|---|---|
| Model Number | HJH92S |
| Part Number | 190-0037 |
| Compatibility | Saatva Lineal Plus Bed Frames (ensure button match) |
| Power Source | 2 x AAA Batteries (not included) |
| Product Dimensions | 7 x 2 x 0.5 inches |
| Item Weight | 7 ounces |
| Color | Silver |
| Special Feature | Ergonomic, Lightweight |
Support and Warranty
As a pre-owned replacement part, this remote control typically does not come with a manufacturer's warranty. For any issues or further assistance, please contact the seller directly through your purchase platform. They can provide support regarding compatibility or functionality.