Introduction
Thank you for choosing the RIRIBEN 15.7'' Picture Light with Motion Sensor. This manual provides detailed instructions for the safe and efficient use of your new picture light. This light features adjustable color temperatures, brightness levels, motion sensing capabilities, and a rechargeable battery for versatile illumination of your artwork or spaces.
What's in the Box
- 2 x Picture Light
- 2 x Screws Set
- 1 x Remote Control
- 2 x USB-C Charging Cable
- 1 x Instruction Manual
Setup
Mounting the Picture Light
The RIRIBEN Picture Light offers two primary mounting options: permanent screw-in installation or temporary magnetic attachment using an adhesive metal plate.
- Screw-in Installation:
a. Select a suitable location on the wall above your artwork. Ensure the surface is clean and dry.
b. Use the provided screws and anchors to securely attach the mounting bracket to the wall. Drill pilot holes if necessary.
c. Once the bracket is secure, attach the picture light to the bracket. The light bar is magnetically detachable from its base for easy charging.Video: Demonstrates the screw-in installation process, including drilling pilot holes, securing the bracket, and attaching the light.
Image: A person installing the picture light above a framed artwork on a wall.
- Magnetic Attachment (for cabinet light use):
a. For alternative uses, such as under-cabinet lighting, an adhesive metal plate is included.
b. Peel off the protective backing from the adhesive metal plate.
c. Stick the plate firmly to a clean, dry surface where you wish to use the light.
d. The picture light can then be magnetically attached to this plate.
Image: Illustration of the light's magnetic detachment feature and its use as a cabinet light with an adhesive metal plate.
Initial Charging
Before first use, fully charge the picture light using the provided USB-C charging cable. Connect the cable to the light and a 5V 2A power adapter (not included). The charging indicator will show progress.
Image: The picture light connected to a charger, displaying its power status and charging progress.
Operating Instructions
The RIRIBEN Picture Light can be controlled via its integrated touch buttons or the included remote control.
Power On/Off
- Touch Control: Press the power button on the light bar.
- Remote Control: Press the power button on the remote.
Adjusting Color Temperature
The light offers 3 color temperatures: Warm White (2700K), Natural White (4000K), and Cool White (6000K).
- Touch Control: Press the color temperature button to cycle through the options.
- Remote Control: Use the dedicated color temperature buttons (e.g., Sun icon for Warm, Snowflake icon for Cool) or cycle button.
Image: Demonstrates the three available color temperatures: Cool White, Natural White, and Warm White.
Adjusting Brightness
The light has 5 brightness levels (0% to 100%).
- Touch Control: Press and hold the power button to dim or brighten.
- Remote Control: Use the '+' and '-' buttons to increase or decrease brightness.
Image: Close-up of the remote control and the touch panel on the light bar, illustrating the two control methods.
Operating Modes: Always-On & Motion Sensor
The picture light features two operational modes:
- Always-On Mode: Provides continuous illumination for showcasing art or general lighting.
- Motion Sensor Mode: The light automatically turns on when motion is detected within its range (0-236 inches, 120° detection angle) and turns off after 30 seconds of no motion. This mode is energy-efficient and ideal for hallways or areas where light is only needed intermittently.
Image: Visual representation of the motion sensor's detection area and the two operating modes.
Timer Function
The light includes 30, 60, and 120-minute timer options to conserve battery life.
- Remote Control: Use the dedicated timer buttons (30min, 60min, 120min) to set the desired duration.
Image: The picture light with visual indicators for its 30, 60, and 120-minute timer settings.
Memory Function
The picture light remembers your last brightness and color temperature settings for convenient, seamless operation upon reactivation.
Flexible Angle Adjustment
The light features a flexible gooseneck arm, allowing you to adjust the angle of illumination to best highlight your artwork or desired area.
Image: Detailed view of the light's dimensions and its adjustable, extendable design.
Maintenance
Charging the Battery
The picture light is equipped with a 9000mAh rechargeable battery. To charge, detach the magnetic light bar from its base and connect the USB-C charging cable. A full charge takes approximately 5-6 hours using a 5V 2A adapter. Battery life varies by mode and brightness:
- Always-On Mode: 13 hours (max brightness) to 50 hours (low brightness).
- Motion Sensor Mode: 25-30 days (based on 50 activations per day).
Image: Visual details of the 9000mAh battery capacity and its performance metrics.
Cleaning
To clean the picture light, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components. Ensure the light is powered off before cleaning.
Troubleshooting
- Light not turning on: Ensure the battery is charged. Check if the power button was pressed correctly.
- Motion sensor not working: Verify the light is in motion sensor mode. Ensure there are no obstructions blocking the sensor.
- Remote control not responding: Check the remote's battery. Ensure there is a clear line of sight to the light's receiver.
- Light flickering or dim: Recharge the battery.
Specifications
| Feature | Detail |
|---|---|
| Brand | RIRIBEN |
| Model Number | PDL-03 |
| Color | Gold |
| Material | Metal, Plastic |
| Light Source | LED |
| Color Temperature | 2700K (Warm), 4000K (Natural), 6000K (Cool) |
| Brightness | Up to 300 Lumens (5 levels) |
| Power Source | Battery Powered (9000mAh Rechargeable) |
| Battery Life (Always-On) | 13-50 hours |
| Battery Life (Motion Sensor) | 25-30 days (50 activations/day) |
| Charging Time | 5-6 hours (with 5V 2A adapter) |
| Control Method | Push Button, Remote, Touch |
| Special Features | Motion Sensor, Timer (30/60/120 min), Memory Function, Magnetic Detachable Light Bar |
| Item Dimensions (L x W x H) | 15.75"L x 1.2"W x 5"H |
| Mounting Type | Wall Mount |
Warranty
This RIRIBEN Picture Light (Model PDL-03) comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Support
For technical assistance, troubleshooting, or warranty inquiries, please contact RIRIBEN customer support through the retailer's platform or visit the official RIRIBEN store page. Please have your model number (PDL-03) and purchase information ready when contacting support.