Important Safety Information
Please read all instructions carefully before using the Astarexin AT7 Red Light Therapy Panel. Failure to follow these instructions may result in injury or damage to the device.
- Always wear the provided protective eyewear during use to shield your eyes from intense light.
- Do not stare directly into the LED lights.
- Keep the device away from water or damp environments.
- Do not use the device on broken, irritated, or infected skin. Consult a healthcare professional if you have any skin conditions.
- If you experience any discomfort, redness, or irritation, discontinue use immediately.
- Keep out of reach of children and pets.
- This device is not intended to diagnose, treat, cure, or prevent any disease or health condition. Consult a healthcare professional for any medical concerns.
- Ensure the power adapter is compatible with your local voltage (100V-240V).
Product Overview
The Astarexin AT7 Red Light Therapy Panel is a portable device designed for targeted light therapy. It features 225 dual-chip LEDs, emitting both 660nm (Red Light) and 850nm (Near Infrared Light) wavelengths. Its compact and lightweight design, along with a detachable magnetic stand, makes it suitable for various usage environments.
What's in the Package
- Astarexin AT7 Red Light Therapy Panel
- Detachable Magnetic Stand
- Power Adapter
- Protective Eyewear
- User Manual
Image: Astarexin AT7 Red Light Therapy Panel with its included accessories, including the panel, power adapter, protective eyewear, and user manual.
Image: The slim Astarexin AT7 Red Light Therapy Panel being easily placed into a bag, highlighting its portability for travel.
Image: A comparison graphic illustrating the Astarexin AT7's compact design, 225 dual-chip LEDs, 4 power modes, and 4 timing settings against a larger, less featured alternative.
Setup
Follow these steps to set up your Astarexin AT7 Red Light Therapy Panel for first use.
- Unpack: Carefully remove all components from the packaging.
- Attach Stand: The device comes with a detachable magnetic stand. Align the stand with the magnetic points on the back of the panel and attach it securely. The stand allows for angle adjustment up to 160 degrees.
- Connect Power: Insert the power adapter cable into the DC input port on the side of the panel. Plug the adapter into a standard 100V-240V electrical outlet.
- Wear Protective Eyewear: Before powering on the device, always put on the provided protective eyewear.
Image: The detachable magnetic stand being attached to the back of the Astarexin AT7 panel, demonstrating its adjustable nature.
Setup Video Guide
Video: This video demonstrates the unboxing, assembly of the magnetic stand, connecting the power supply, and initial power-on sequence of the Astarexin AT7 Red Light Therapy Panel.
Operating Instructions
The Astarexin AT7 panel features intuitive controls for customizing your therapy sessions.
Image: A close-up of the Astarexin AT7 control panel, showing buttons for power, pulse mode, spectrum mode, power mode (intensity), and timer settings.
Control Buttons
- Power Button: Long press to turn the device on or off. Short press to cycle through 10Hz Pulse Mode and 40Hz Pulse Mode.
- Spectrum Mode Button: Press to select the desired light spectrum:
- R (Red): 660nm visible red light.
- IR (Infrared): 850nm invisible near-infrared light.
- RIR (Red + Infrared): Combination of 660nm and 850nm.
- Power Mode Button (Brightness Setting): Press to adjust the intensity level. There are 4 intensity levels: P1, P2, P3, P4. P4 provides the highest intensity (55mW/cm² at 3 inches).
- Timer Button: Press to set the session duration. Available timer settings are 5, 10, 15, and 30 minutes. The device will automatically shut down when the timer expires.
Starting a Session
- Ensure the device is plugged in and you are wearing protective eyewear.
- Long press the Power Button to turn on the device.
- Select your desired light spectrum (R, IR, or RIR) using the Spectrum Mode Button.
- Adjust the intensity level (P1-P4) with the Power Mode Button.
- Set your preferred session duration (5, 10, 15, or 30 minutes) using the Timer Button.
- Position the device according to the Usage Guidelines.
- The device will automatically turn off when the timer completes. To end a session early, long press the Power Button.
Usage Guidelines
For optimal results and safety, consider the following guidelines:
Recommended Distance and Duration
- Distance: For maximum intensity, position the device approximately 3 to 6 inches from the target area. For broader coverage with slightly reduced intensity, you can increase the distance up to 12 inches.
- Duration: Start with shorter sessions (e.g., 5-10 minutes) and gradually increase as tolerated. Typical session durations range from 10 to 20 minutes per area.
- Frequency: Daily use or 3-5 times per week is common. Listen to your body and adjust as needed.
Image: A woman using the Astarexin AT7 panel for facial and décolletage skin care, illustrating the application of 660nm red light for surface benefits.
Image: A man using the Astarexin AT7 panel for muscle recovery after exercise, demonstrating the deeper penetration of 850nm near-infrared light for muscle and joint support.
Versatile Application
The portable design and adjustable stand allow for use in various settings:
- Home: Use on a tabletop or floor for targeted therapy.
- Gym: Convenient for post-workout recovery.
- Office: Integrate into your workday for quick sessions.
- Travel: Easily packable for use on business trips or vacations.
Image: A collage showing individuals using the Astarexin AT7 panel in diverse settings such as a gym, home, office, and outdoors, emphasizing its adaptability.
Maintenance
Proper care will ensure the longevity and performance of your device.
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the surface of the panel. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, you can detach the stand and store the panel in a protective sleeve or bag.
- Inspection: Periodically check the power cord and adapter for any signs of damage. If damaged, discontinue use and contact customer support.
Troubleshooting
If you encounter any issues with your Astarexin AT7 panel, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Not plugged in correctly or power outlet issue. | Ensure the power adapter is securely connected to the device and a working electrical outlet. Try a different outlet. |
| Lights are not visible. | 850nm Near Infrared (NIR) light is invisible to the naked eye. | If you have selected the 'IR' mode, the lights will not be visible. This is normal. If in 'R' or 'RIR' mode and no red light is visible, check power connection. |
| Device shuts off unexpectedly. | Timer has expired. | This is normal operation. Reset the timer or restart the device if you wish to continue your session. |
| Stand is unstable. | Stand not properly attached or placed on an uneven surface. | Ensure the magnetic stand is firmly attached to the panel and the device is placed on a flat, stable surface. |
If the problem persists after trying these solutions, please contact Astarexin customer support.
Specifications
Technical details for the Astarexin AT7 Red Light Therapy Panel:
- Model Number: AT7
- LED Count: 225 Dual-Chip LEDs
- Wavelengths: 660nm (Red Light), 850nm (Near Infrared Light)
- Intensity Levels: 4 (P1, P2, P3, P4) - P4: 55mW/cm² at 3 inches
- Timer Settings: 5, 10, 15, 30 minutes
- Power Input: 100V-240V
- Dimensions (Panel): Approximately 11.14 x 10.2 x 1.37 inches (based on package dimensions and product description)
- Weight (Panel): Approximately 1.9 lbs (based on product description)
- Manufacturer: Astarexin
Image: A chart illustrating the irradiance effect of the red light therapy panel, showing decreasing intensity (mW/cm²) as the distance from the device increases from 0 to 12 inches.
Warranty and Support
Astarexin is committed to providing quality products and customer satisfaction. For any questions, concerns, or warranty claims regarding your AT7 Red Light Therapy Panel, please contact Astarexin customer support through the retailer where you purchased the product or visit the official Astarexin website for contact information.
Please retain your proof of purchase for warranty purposes.