Harbr.Breeze Mayfield 44-inch Flush Mount Ceiling Fan with Light

Introduction

Thank you for choosing the Harbr.Breeze Mayfield 44-inch Flush Mount Ceiling Fan with Light. This fan is designed for indoor use in small rooms up to 100 sq ft. It features a clean white finish, reversible blades (white on one side, golden on the other), and an integrated LED light kit for energy-efficient illumination. The flush mount design is ideal for standard or lower ceilings. Please read this manual thoroughly before installation and operation to ensure safe and proper use.

Image: Front view of the Harbr.Breeze Mayfield 44-inch Flush Mount Ceiling Fan with Light, showcasing its white finish and five blades.

Safety Information

WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these basic precautions:

• Read all instructions before installing the fan.
• Consult a qualified electrician if you are unsure about wiring or installation procedures.
• Ensure the electrical supply is disconnected at the circuit breaker before installation or servicing.
• This fan is suitable for indoor locations only. Do not install in damp or wet areas.
• The fan must be installed as a flush mount only.
• Ensure the mounting structure can support the weight of the fan (approximately 12.7 pounds).
• Do not insert objects into the path of the rotating blades.

Package Contents

Verify that all components are present before beginning installation:

• 1 x Harbr.Breeze Mayfield 44-inch Flush Mount White Ceiling Fan with Light (5-Blade)
• 2 x 5.5W LED medium base light bulbs
• Installation hardware (screws, wire nuts, etc.)
• Instruction Manual

Setup and Installation

Installation of this ceiling fan requires electrical wiring and secure mounting. It is recommended that installation be performed by a qualified electrician.

1. Prepare the Installation Site: Ensure the power is OFF at the circuit breaker. Remove any existing light fixture or fan.
2. Mount the Bracket: Securely attach the mounting bracket to the ceiling junction box. The junction box must be listed for fan support.
3. Wire the Fan: Connect the fan's electrical wires to the household wiring according to local electrical codes. Ensure all connections are secure.
4. Attach the Fan Body: Carefully lift the fan body and attach it to the mounting bracket. This fan is designed for flush mount installation, meaning it sits directly against the ceiling.
5. Install Blades: Attach the five fan blades to the motor housing. The blades are reversible, offering a choice between a white finish and a golden finish. Select your preferred side before attaching.

Image: Harbr.Breeze Mayfield ceiling fan with white blades installed in a living room setting.

Image: Harbr.Breeze Mayfield ceiling fan with golden blades installed in a bedroom setting.

6. Install Light Kit: Connect the light kit wiring and secure the light kit to the fan housing. Install the two provided 5.5W LED bulbs.
7. Attach Glass Shade: Secure the glass shade to the light kit.
8. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.

Operating Instructions

The Harbr.Breeze Mayfield ceiling fan is operated using convenient pull chains.

Image: Close-up view of the fan's light fixture, showing the two pull chains for fan speed and light control.

• Fan Speed Control: One pull chain controls the fan speed. Pull the chain repeatedly to cycle through high, medium, low, and off settings.
• Light Control: The other pull chain controls the integrated LED light. Pull the chain to turn the light on or off.
• Reversible Motor: The fan features a reversible motor for seasonal use. A small switch located on the motor housing (usually above the light kit) allows you to change the direction of blade rotation.
  • Summer Mode: Set the switch to make the blades rotate counter-clockwise, pushing cool air down.
  • Winter Mode: Set the switch to make the blades rotate clockwise, drawing warm air up and distributing it evenly.

  Important: Always turn off the fan and wait for the blades to stop completely before changing the motor direction switch.

Maintenance

The Harbr.Breeze Mayfield ceiling fan is designed for low maintenance. The integrated LED light kit provides approximately 6000 hours of maintenance-free operation.

• Cleaning: To clean the fan, wipe surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
• Blade Cleaning: Periodically clean dust from the fan blades to maintain optimal airflow and prevent imbalance.
• Check Connections: Annually, check all screws and connections for tightness.

Caution: Always ensure the power is disconnected at the circuit breaker before performing any cleaning or maintenance.

Troubleshooting

If you experience issues with your ceiling fan, refer to the following common problems and solutions:

Specifications

Warranty and Support

Specific warranty information for the Harbr.Breeze Mayfield ceiling fan is typically included with the product packaging or available from the retailer at the time of purchase. Please refer to those documents for details regarding warranty coverage and duration.

For customer support, technical assistance, or to inquire about replacement parts, please contact the retailer where the product was purchased or the manufacturer directly. Have your model number (807423) and purchase date ready when contacting support.