YATINEY BT18DBR Bar Table with LED Lights Instruction Manual

1. Introduction

Thank you for purchasing the YATINEY BT18DBR Bar Table with LED Lights. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar table. Please read these instructions carefully before use and retain them for future reference.

Figure 1.1: YATINEY BT18DBR Bar Table with LED Lights.

2. Safety Information

To ensure safe use and prevent damage, observe the following safety guidelines:

• Anti-Tip Kit: Always install the provided anti-tip kit to secure the table to a wall, especially if it will be placed in an area with children or pets, or if it will bear heavy loads.
• Weight Capacity: Do not exceed the maximum recommended weight capacity for the tabletop. Distribute weight evenly.
• Stability: Ensure the table is placed on a flat, stable surface. Adjust the leveling feet as needed to prevent wobbling.
• Electrical Safety: The LED light strip requires a USB adapter (included). Use only the provided adapter or a compatible USB power source. Do not expose the light strip or adapter to water or excessive moisture.
• Assembly: Follow all assembly instructions carefully. Do not overtighten screws. Ensure all connections are secure before use.
• Children: Keep small parts and packaging materials away from children during assembly.

3. Setup and Assembly

The YATINEY BT18DBR Bar Table is designed for easy assembly. All necessary tools and components are included.

3.1 Included Components

• 1 x Suspended Bar Table (disassembled parts)
• 1 x LED Light Strip
• 1 x Accessory Kit (screws, hex bolts, leveling feet, anti-tip kit)
• 1 x Assembly Guide
• 1 x USB Adapter for LED strip

3.2 Assembly Instructions

1. Unpack all components and verify against the parts list in the included Assembly Guide.
2. Attach the legs to the main frame using the provided screws.
3. Tighten all screws using the provided tool, ensuring a snug fit without overtightening.
4. Insert tabletop support brackets into the pre-drilled holes on the frame.
5. Secure the legs to the brackets using the included hex bolts.
6. Carefully flip the table upright once all connections are secure.
7. Install the LED light strip according to the separate instructions provided with the strip.
8. Attach the anti-tip kit to the table and wall as per the safety instructions.

Figure 3.1: Product Dimensions for Assembly Reference.

Figure 3.2: Detail of Reinforced Metal Frame Connection.

4. Operating the LED Lights

The integrated LED light strip offers customizable lighting to enhance your environment.

4.1 Powering On/Off

Connect the LED light strip's USB cable to the provided USB adapter, then plug the adapter into a standard wall outlet. The lights can be turned on or off using the remote control, the mode key on the cable, or the dedicated app.

4.2 Control Methods

• Remote Control: Use the included remote to change colors, adjust brightness, select lighting modes, and control music synchronization.
• Mode Key: A physical button on the LED strip's cable allows for basic mode cycling and power control.
• Bluetooth App: Download the recommended app (details in the LED strip's separate guide) to connect via Bluetooth. The app provides advanced control over colors, effects, music synchronization, and timing functions.

Figure 4.1: LED Light Control Options (App and Remote).

Figure 4.2: Bar Table with LED Lights in use.

5. Maintenance

Proper care will extend the life and appearance of your bar table.

• Cleaning: Wipe the table surfaces with a dry cloth. For stubborn marks, use a slightly damp cloth with a mild, non-abrasive cleaner, then dry immediately. Avoid harsh chemicals.
• Spills: Clean up spills immediately to prevent staining, especially on the particleboard surfaces.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• LED Lights: Ensure the LED strip and its connections are free from dust and debris. Do not attempt to repair damaged LED strips; contact customer support for replacement.
• Environment: This table is designed for indoor use only. Avoid prolonged exposure to direct sunlight or extreme humidity.

6. Troubleshooting

If you encounter issues with your YATINEY Bar Table, refer to the following common solutions:

6.1 Table Stability Issues

• Wobbling: Check that all assembly screws are securely tightened. Ensure the table is on a level surface. Adjust the leveling feet at the bottom of the legs to compensate for uneven floors.
• Anti-Tip Kit: Verify that the anti-tip kit is correctly installed and securely fastened to both the table and the wall.

6.2 LED Light Issues

• Lights Not Turning On:
  • Ensure the USB adapter is properly plugged into a working power outlet.
  • Check that the USB cable from the LED strip is securely connected to the adapter.
  • Verify the LED strip itself is properly connected to its controller.
  • Try using a different USB power source to rule out adapter failure.
• Remote Control Not Working:
  • Check the battery in the remote control and replace if necessary.
  • Ensure there are no obstructions between the remote and the LED receiver.
• Bluetooth App Connectivity Issues:
  • Ensure Bluetooth is enabled on your smartphone.
  • Restart the app and try reconnecting.
  • Unplug and replug the LED strip power to reset the Bluetooth module.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the YATINEY official website. Please retain your proof of purchase for any warranty claims.

Return Policy: This product is eligible for a 30-day refund or replacement policy from the date of purchase, subject to the retailer's terms and conditions.