Bellemave Queen Size Murphy Bed Instruction Manual

1. Product Overview

The Bellemave Queen Size Murphy Bed is a versatile furniture piece designed to maximize space. It functions as a storage cabinet when folded and transforms into a comfortable queen-size bed when unfolded. This unit includes an integrated charging station and a storage drawer for added convenience.

Image 1.1: The Bellemave Murphy Bed shown as a closed cabinet and as an open bed.

Key Features:

• Dual Functionality: Converts from a storage cabinet to a queen-size bed.
• Integrated Charging Station: Conveniently located for powering devices.
• Storage Drawer: Provides additional space for pillows or other items.
• Durable Construction: Features smooth rails, fixed universal wheels, and an anti-tipping device for stability and safety. Zinc alloy connectors reinforce the folding frame.
• Farmhouse Aesthetic: Constructed from high-quality wood with a distressed finish.

2. Safety Information

Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in injury or product damage.

• Assembly: Always assemble the unit with at least two people. Ensure all hardware is securely tightened before use.
• Anti-Tipping Device: The Murphy bed is equipped with an anti-tipping device. Ensure this device is properly installed and secured to a wall stud to prevent accidental tipping.
• Weight Capacity: Do not exceed the maximum weight capacity of 880 lbs for the Queen size bed.
• Clearance: Ensure adequate clearance around the bed when folding and unfolding to prevent obstructions or damage.
• Children and Pets: Keep children and pets away from the unit during folding and unfolding operations.
• Electrical Safety: When using the charging station, ensure all devices and cables are in good condition and not overloaded. Do not expose the charging station to liquids.

3. Package Contents

Before beginning assembly, verify that all components listed in the packing list are present and undamaged. If any parts are missing or damaged, contact customer service immediately.

Image 3.1: Dimensions of the Queen Size Murphy Bed. Weight capacity: 880 lbs.

4. Setup and Assembly Instructions

Assembly of the Bellemave Queen Size Murphy Bed typically requires 2-3 hours with two people. Each part is numbered for easy identification. Follow the detailed manual included in your package for step-by-step instructions.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Identify Parts: Refer to the included parts list and diagrams to identify each component.
3. Assemble Base Frame: Begin by assembling the main cabinet frame according to the instructions.
4. Install Folding Mechanism: Attach the bed frame and folding mechanism, ensuring smooth operation.
5. Secure Anti-Tipping Device: Crucially, secure the anti-tipping device to a wall stud using appropriate hardware. This step is essential for safety.
6. Attach Storage Drawer: Assemble and install the storage drawer.
7. Connect Charging Station: Integrate the charging station into the designated area.
8. Final Checks: Before use, double-check all connections and hardware to ensure they are tight and secure.

Image 4.1: View of the bed frame with mattress support slats, ready for mattress placement.

5. Operating Instructions

Folding and Unfolding the Bed:

• To Unfold:
  1. Ensure the area in front of the cabinet is clear of obstructions.
  2. Gently pull the top panel forward and down. The bed frame will smoothly extend.
  3. Lower the bed frame completely until it rests on the floor.
• To Fold:
  1. Remove any bedding or pillows that might obstruct the folding mechanism.
  2. Lift the bed frame from the foot end. The frame will retract into the cabinet.
  3. Push the panel back into its upright cabinet position until it is securely closed.

Image 5.1: The Murphy Bed in its fully unfolded position, ready for use.

Using the Charging Station:

The integrated charging station is located on the side of the cabinet. It provides convenient access to power outlets for charging electronic devices.

• Plug the Murphy bed's power cord into a standard wall outlet.
• Connect your devices to the USB ports or AC outlets on the charging station.

Image 5.2: Detail of the charging station, featuring USB ports and standard outlets.

Using the Storage Drawer:

The large storage drawer located at the base of the cabinet provides additional space for storing pillows, blankets, or other items.

• Gently pull the drawer handle to open.
• Push the drawer back in until it is fully closed.

Image 5.3: The Murphy Bed cabinet with its spacious storage drawer open.

6. Maintenance

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Hardware: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as necessary.
• Moving the Unit: If relocating the unit, ensure the bed is in the folded cabinet position. Use caution and lift with assistance to prevent damage or injury.
• Mechanism Lubrication: The folding mechanism is designed for smooth operation. If any stiffness occurs, a light application of silicone-based lubricant to moving parts may be applied, avoiding contact with wood surfaces.

7. Troubleshooting

8. Specifications

9. Warranty and Customer Support

For warranty information or assistance with assembly, missing parts, or any other product-related inquiries, please contact Bellemave customer service. Refer to the contact information provided in your product packaging or visit the official Bellemave website.

You can also visit the Bellemave Store on Amazon for more information.