Kikihouse Full Size Murphy Cabinet Bed Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Kikihouse Full Size Murphy Cabinet Bed. Please read all instructions carefully before beginning assembly or use to ensure safe and proper functionality. This convertible bed offers a space-saving solution, transforming from a stylish cabinet into a comfortable full-size bed, complete with storage and integrated charging features.

Safety Information

• Adult Assembly Required: Assembly should be performed by two adults.
• Wall Mounting: For stability and safety, it is highly recommended to mount the cabinet bed securely to a wall.
• Weight Limit: The bed frame has a weight limit of 600 pounds. The tabletop has a weight limit of 100 pounds. Do not exceed these limits.
• Mattress Compatibility: Use a foldable mattress (not included) that fits 54" x 75" dimensions and has a folded thickness of less than 23.6 inches.
• Electrical Safety: Ensure the charging station is properly connected to a grounded outlet. Do not overload the outlets.
• Moving Parts: Exercise caution when converting the bed to avoid pinching or injury from moving parts. Keep children and pets away during conversion.
• Cleaning: Wipe with a dry cloth. Avoid harsh chemicals that may damage the finish.

Package Contents

Your Kikihouse Full Size Murphy Cabinet Bed will arrive in multiple packages (typically 2-3). Please verify all parts are present before beginning assembly. A detailed parts list is included in the separate assembly guide.

Key components include:

• Cabinet frame components
• Bed frame components
• Storage drawers and rails
• Motion sensor lights (2 included)
• Built-in charging station (2 AC outlets, 2 USB ports)
• Hardware kit (screws, dowels, hinges, latches)
• Assembly instructions

Setup and Assembly

Assembly of the Kikihouse Murphy Cabinet Bed requires two adults and approximately 6-8 hours. Follow the detailed step-by-step instructions provided in the separate assembly manual. Ensure you have adequate space and the necessary tools (e.g., screwdriver, hammer) before starting.

Key Assembly Steps:

1. Unpack and Organize: Carefully unpack all boxes and lay out components. Verify all parts against the included parts list.
2. Assemble Cabinet Frame: Construct the main cabinet structure according to the diagrams.
3. Install Drawer Rails: Attach the smooth-gliding rails for the storage drawers.
4. Assemble Bed Platform: Construct the foldable bed platform.
5. Integrate Bed Platform: Secure the bed platform within the cabinet frame using the alloy hinges and latches.
6. Install Storage Drawers: Assemble and insert the two large storage drawers into the base.
7. Attach Top Shelf: Secure the double-layer top shelf for additional storage and display.
8. Install Charging Station: Mount the charging station and connect its power cord to a wall outlet.
9. Install Motion Sensor Lights: Attach the motion-activated lights to the designated areas.
10. Wall Anchoring: Securely anchor the entire unit to the wall using the provided anti-tip hardware.

Image: Product dimensions and component overview. Note that the product comes in multiple packages.

Image: Details of the top board locking mechanism, panel connection latch, and folding hinges, ensuring secure and smooth operation.

Operating Instructions

Converting from Cabinet to Bed:

1. Step 1: Pull out the drawers. Gently pull out the two large storage drawers at the base of the cabinet. These drawers are equipped with 12 quiet-rolling wheels and precision rails for effortless movement.
2. Step 2: Open the top panel. Release the top board locking mechanism (red button) and carefully flip down the top panel of the cabinet.
3. Step 3: Remove the bed board. Unlatch the bed board from the cabinet interior and pull it forward to extend the bed frame. If a foldable mattress is stored inside, remove it at this point.
4. Step 4: Open the side panels. Fold out the side panels, which will reveal the foldable side shelves. Secure them in place.
5. Step 5: Set the sensor light mode. Adjust the motion sensor lights located on each side to your preferred mode (Always On, Motion at Night, or Motion All Day).
6. Place Mattress: Position your foldable mattress (not included) onto the extended bed frame.

Converting from Bed to Cabinet:

1. Remove Mattress: Take off the mattress and, if applicable, fold and store it in the hidden compartment.
2. Fold Side Shelves: Unlatch and fold the side shelves back into the cabinet.
3. Fold Bed Platform: Lift and fold the bed platform back into the cabinet, securing it with the internal latches.
4. Close Top Panel: Lift the top panel back into its upright position and secure it with the top board locking mechanism.
5. Push in Drawers: Gently push the storage drawers back into the cabinet base until fully closed.

Using Storage Features:

• Bottom Drawers: The two large drawers at the base provide ample space for bedding, pillows, or seasonal clothing.
• Top Shelf: The double-layer shelf at the top of the cabinet is ideal for books, decor, and other essentials.
• Hidden Compartment: A hidden compartment inside the cabinet is designed to store a foldable bed frame or mattress when not in use.

Image: Spacious storage drawers for bedding and other items.

Image: Double-layer top shelf for organizing and displaying items.

Motion Sensor Lights:

• Each side of the bed is equipped with motion-activated lights.
• The lights feature three adjustable modes: Always On, Motion at Night, and Motion All Day. Use the button on the light unit to switch between modes.
• These lights are battery-powered (batteries not included) and offer stick-on installation.

Image: Motion sensor light features, including battery power, mode selection, and stick-on installation.

Charging Station:

• The left side of the bed features a built-in charging station.
• It includes 2 AC outlets (120V/12A) and 2 USB ports (5V/2A).
• The charging station has a 4.9-foot power cord. Plug it into a standard wall outlet to activate.

Image: Integrated charging station with AC outlets and USB ports for convenient device charging.

Maintenance

• Cleaning: Wipe surfaces with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals.
• Hardware Check: Periodically check all screws, bolts, and hinges to ensure they are tight and secure. Tighten as needed.
• Drawer Rails: Keep drawer rails clean and free of debris to ensure smooth operation. Lubricate if necessary with a silicone-based lubricant.
• Motion Sensor Lights: Replace batteries as needed.
• General Care: Avoid placing hot items directly on the surface. Use coasters or protective pads.

Troubleshooting

Specifications

Warranty and Support

For warranty information, missing parts, or any product-related inquiries, please contact Kikihouse customer support. Refer to your purchase documentation for specific warranty terms and contact details. Our customer support team is available to assist with any questions regarding assembly or product functionality.

Manufacturer: Kikihouse

ASIN: B0FPW9VMHM