AMERLIFE 36.2" Fluted Vanity Desk with LED Lights and Charging Station

Introduction

Welcome to the AMERLIFE 36.2" Fluted Vanity Desk user manual. This guide provides essential information for the assembly, operation, and maintenance of your new vanity desk. Please read all instructions carefully before beginning assembly or use to ensure safe and proper functionality.

Important Safety Information:

• Avoid sharp edges and damaged surfaces.
• Keep electrical components dry and away from water.
• Unplug and turn off the LED lights when not in use.
• Do not exceed the weight limit of the vanity desk.

Package Contents

Before assembly, verify that all parts and hardware are present. Refer to the assembly video for visual identification of each component.

Parts List (Refer to Assembly Video for detailed numbering and dimensions):

• Main desk panels (top, side, bottom, back)
• Drawer components (fronts, sides, backs, bottoms)
• Mirror frame and mirror panel
• Tempered glass top panels
• LED light bulbs and wiring
• Charging station unit
• Hair dryer holder

Hardware List (Screws, dowels, cams, drawer slides, etc.):

• Various screws (e.g., Ø3.5*12, Ø4*35, Ø3*14)
• Cam locks (Ø15*9.5)
• Connecting bolts (Ø6.5*35)
• Wooden dowels (Ø8*30, Ø6*30)
• Drawer slides (Left and Right Cabinet Members, Left and Right Drawer Members)
• Gold handles
• Anti-tipping hardware

Setup and Assembly

Follow the detailed steps in the official installation guide video and accompanying diagrams for proper assembly. It is recommended to have two people for assembly, which typically takes under an hour. A solo assembly may take approximately one and a half hours.

Key Assembly Steps:

1. Prepare Drawer Slides: Attach the cabinet drawer slides to the designated side panels (parts 2, 4, 11, 3) using screws (E). Ensure correct orientation for left (NCL) and right (NCR) slides.
2. Assemble Base Frame: Connect the horizontal support bars (parts 27, 28, 29) to the side panels (parts 3, 11) using wooden dowels (D) and cam locks (A).
3. Construct Drawer Boxes: Assemble the drawer sides (parts 13, 14, 16, 18, 19, 21) and bottoms (parts 17, 22) using screws (G). Attach the drawer fronts (parts 15, 20) using connecting bolts (B).
4. Install Drawer Slides on Drawers: Secure the drawer slides (NDL, NDR) to the assembled drawer boxes using screws (E).
5. Integrate Drawers: Slide the completed drawers into the cabinet frame.
6. Attach Mirror Frame: Secure the mirror frame (part 1) to the main desk structure using connecting bolts (B) and cam locks (A).
7. Install Tempered Glass: Carefully place the tempered glass panels (part 12) into the designated slots on the desk top. Secure with screws (J) and covers (L).
8. Connect LED Lights: Insert the LED light bulbs (Q) into the mirror frame. Connect the wiring as shown in the video, ensuring all connections are secure.
9. Install Charging Station and Hair Dryer Holder: Attach the charging station (O) and hair dryer holder (M) to the side of the desk using screws (F, I).
10. Secure to Wall (Anti-Tipping): Use the provided anti-tipping hardware (R) to secure the vanity desk to a wall, preventing accidental tipping.

Operating Instructions

LED Mirror Lights:

The vanity mirror features adjustable LED lights with three color modes and stepless dimming. Use the inline 4-button controller to operate the lights:

• Power Button: Press to turn the lights On/Off.
• Mode Button: Press to cycle through the three color modes:
  • Warm Light: Ideal for night skincare routines.
  • Natural Light: Suitable for everyday makeup application.
  • Cool White Light: Best for detailed makeup application.
• Brightness Adjustment (+/-): Press and hold the '+' or '-' buttons to steplessly adjust the brightness level from 0% to 100%.

Built-in Charging Station:

The vanity desk includes a built-in charging hub with 2 AC outlets, 1 USB port, and 1 Type-C port. This allows you to conveniently charge your electronic devices or power hair tools while using the vanity.

Storage Drawers:

The vanity features four spacious drawers for organizing cosmetics, jewelry, and accessories. The tempered glass top allows for easy visibility and access to items stored in the top drawers.

Maintenance and Care

To maintain the quality and appearance of your AMERLIFE vanity desk, follow these care instructions:

• Wipe the surface regularly with a soft, dry cloth.
• Avoid using alcohol or corrosive cleaners, as these can damage the glass top and wood texture finish.
• Keep the vanity away from direct sunlight and excessive moisture to prevent warping or discoloration.

Troubleshooting

If you encounter any issues with your vanity desk, refer to the following common solutions:

• LED Lights Not Working:
  • Ensure the power cable is securely plugged into a working outlet.
  • Check the inline controller for any loose connections.
  • Verify that the power button on the controller is pressed.
• Charging Station Not Functioning:
  • Confirm the vanity's main power cord is plugged in.
  • Test the outlets with another device to ensure they are receiving power.
  • Check for any tripped circuit breakers in your home.
• Drawers Sticking or Not Sliding Smoothly:
  • Ensure the drawer slides are properly aligned and free of obstructions.
  • Check that all screws securing the slides are tightened.
  • Avoid overloading drawers beyond their weight capacity.

For further assistance, please contact customer support.

Specifications

Warranty and Support

For any questions, concerns, or warranty inquiries regarding your AMERLIFE vanity desk, please contact AMERLIFE customer support through the retailer's platform or the official AMERLIFE website. Please retain your proof of purchase for warranty claims.

Online resources and additional support may be available on the AMERLIFE Store.