LYNCOHOME LHCF159-WN Fluted Lift Top Coffee Table User Manual

1. Introduction

Thank you for choosing the LYNCOHOME LHCF159-WN Fluted Lift Top Coffee Table. This modern oval coffee table features a unique fluted design, a convenient lift-top mechanism with hydraulic gas struts, and ample hidden storage. This manual provides detailed instructions for assembly, operation, maintenance, and important safety information to ensure proper use and longevity of your product.

2. Safety Information

• Maximum Weight Recommendation: Do not exceed the maximum weight recommendation of 66 pounds (30 kg) on the tabletop to prevent damage or instability.
• Rounded Corners: The table features circular rounded corners for enhanced safety, reducing the risk of injury.
• Assembly: Ensure all parts are securely fastened according to the assembly instructions. Loose parts can lead to instability and potential hazards.
• Placement: Place the coffee table on a flat, stable surface to prevent tipping.
• Children: Keep children away from the lift-top mechanism during operation to prevent pinching or injury.

3. Package Contents

Before assembly, please verify that all components and hardware listed below are present and undamaged. If any parts are missing or damaged, please contact LYNCOHOME customer support.

Included Components:

• Assembly Guide
• Installation Tool (Allen Key)
• All necessary hardware (screws, dowels, cam locks, etc.)
• Tabletop (A)
• Base Panel (B)
• Side Panels (C, D, E)
• Legs (F)
• Fluted Side Panels (G)
• Curved Top Frames (H)
• Hydraulic Gas Struts (Lift Mechanism)

Tools Recommended for Assembly:

• Allen Key (included)
• Screwdriver (Phillips head recommended)

4. Assembly Instructions

Please follow these steps carefully. It is recommended to assemble the table on a soft, clean surface to prevent scratches. Refer to the included assembly guide for detailed diagrams.

Assembly Video Guide:

Step-by-Step Assembly:

1. Attach Legs to Base Panel: Secure the four legs (F) to the underside of the base panel (B) using screws (5). Ensure they are firmly attached.
   

   Image: Screwing the legs (F) into the base panel (B) using screws (5).

2. Insert Wooden Dowels: Insert wooden dowels (3) into the designated holes on the base panel (B) where the side panels will connect.
   

   Image: Placing wooden dowels (3) into the pre-drilled holes on the base panel (B).
3. Assemble Side Panels: Attach the side panels (E) to the base panel (B) using the wooden dowels (3) and cam lock screws (2) with cam locks (1). Ensure the panels are oriented correctly with the top holes facing upwards.
   

   Image: Securing side panel (E) to the base panel (B) using cam lock screws (2).

4. Attach Fluted Side Panels: Carefully align and attach the fluted side panels (G) to the curved edges of the base and side panels. These panels slide into place.
   

   Image: Installing the fluted side panel (G) into the curved section of the table.

5. Install Curved Top Frames: Place the curved top frames (H) onto the top edges of the fluted side panels and secure them using cam lock screws (1) and cam locks (2).
   

   Image: Attaching the curved top frame (H) to the table structure.
6. Mount Hydraulic Gas Struts: Attach the hydraulic gas struts (lift mechanism) to the interior side panels using screws (9). Ensure they are securely fastened.
   

   Image: Screwing the hydraulic gas strut into the side panel.

7. Attach Tabletop: Carefully align the tabletop (A) with the hydraulic gas struts and secure it using screws (8). Ensure the tabletop is centered and moves smoothly.
   

   Image: Securing the tabletop (A) to the hydraulic gas struts using screws (8).

8. Apply Felt Pads: Apply the felt pads (13) to the contact points between the tabletop and the main body to ensure silent closing and prevent scratches.

5. Operating Instructions

Lift-Top Mechanism:

• To raise the tabletop, gently lift the front edge of the table. The hydraulic gas struts will assist in a smooth, balanced upward motion.
• To lower the tabletop, gently push down on the front edge. The hydraulic system will ensure a controlled and quiet descent, preventing slamming.
• The lift-top can be adjusted to a height of 22.6 inches from the ground, providing a comfortable surface for working or dining while seated on a sofa.

Storage Access:

• The large hidden compartment beneath the tabletop is accessible when the top is lifted.
• The spacious open shelf provides additional storage for frequently used items.

Image: The coffee table with its lift-top raised, showcasing the internal storage and elevated surface.

6. Maintenance and Care

• Cleaning: Wipe the table surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the engineered wood finish.
• Spills: Clean up spills immediately to prevent staining. The table is not stain-resistant.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the wood finish.
• Heat: Use coasters or protective pads under hot items to prevent heat damage to the tabletop.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Tighten if necessary.

7. Troubleshooting

• Tabletop is not stable: Ensure all screws securing the legs and side panels are tightened. Check the hydraulic gas struts for proper installation.
• Lift-top mechanism is stiff or noisy: Ensure all connections are free of obstructions. A small amount of silicone lubricant can be applied to moving parts if necessary, but avoid over-lubricating.
• Parts are missing or damaged: Refer to the 'Package Contents' section and contact LYNCOHOME customer support for assistance.

8. Specifications

Image: Detailed product dimensions including depth, width, and height.

9. Warranty and Support

For warranty information, product support, or to report missing/damaged parts, please contact LYNCOHOME customer service directly. You can often find contact details on the product packaging or by visiting the official LYNCOHOME brand store online.

Visit the LYNCOHOME Store: LYNCOHOME Official Store