SILKYDRY 9-Piece Dining Table Set

1. Important Safety Information

Please read and understand all instructions and safety warnings before assembling and using this dining table set. Failure to follow these instructions may result in injury or damage to the product.

• Keep all packaging materials, especially plastic bags, away from children and pets to prevent suffocation hazards.
• Ensure all components and hardware are present before beginning assembly. Refer to the parts list.
• Assemble the product on a soft, clean, and level surface (e.g., carpet or cardboard) to prevent scratching or damage.
• Do not overtighten screws or bolts during assembly, as this may strip threads or crack materials. Tighten until snug, then give a final quarter-turn.
• Ensure all connections are securely fastened before placing any weight on the table or using the chairs.
• Do not stand on the table or chairs. This product is designed for seating and dining purposes only.
• Distribute weight evenly across the table surface. Avoid placing heavy objects on one side only.
• Regularly check all fasteners to ensure they remain tight. Retighten as necessary.

2. Package Contents

Your SILKYDRY 9-Piece Dining Table Set is shipped in 3 boxes. Carefully unpack all contents and verify that you have received all parts listed below. If any parts are missing or damaged, please contact customer support.

Image 1: Overview of the SILKYDRY 9-Piece Dining Table Set, featuring the rectangular table and eight upholstered chairs.

Included Components:

• 1 x Rectangular Dining Table (63"L x 31.5"W x 30"H)
• 8 x Dining Chairs (16"L x 20.5"W x 39"H)
• Hardware Pack (screws, bolts, washers, Allen wrench)

3. Assembly Instructions

Follow these steps carefully for proper assembly. It is recommended to have two people for table assembly.

3.1 Table Assembly

1. Prepare the Tabletop: Place the tabletop (A) upside down on a clean, soft surface to prevent scratches.
2. Attach Table Legs: Securely attach the four L-shaped wooden table legs (B) to the designated corners on the underside of the tabletop using the provided bolts and washers. Do not fully tighten yet.
3. Reinforce Connections: Ensure all leg connections are aligned. Once all legs are in place, gradually tighten all bolts with the Allen wrench until secure.
4. Upright the Table: With assistance, carefully flip the assembled table upright.

3.2 Chair Assembly

1. Assemble Chair Frame: For each chair, connect the front legs (C) and back legs (D) to the chair seat frame (E) using the appropriate bolts and washers. Ensure the frame is stable.
2. Attach Backrest: Secure the curved high-back chair backrest (F) to the assembled chair frame using the remaining bolts.
3. Install Seat Cushion: Place the upholstered seat cushion (G) onto the chair frame and secure it with screws from underneath.
4. Final Tightening: Once all parts are loosely assembled, gradually tighten all bolts on the chair until firm. Do not overtighten.
5. Attach Rubber Pads: Ensure the chair rubber pads are securely attached to the bottom of each chair leg to prevent noise and slipping.

Image 2: Detail of a chair's curved high-back and upholstered seat, highlighting ergonomic design.

4. Operation and Use

This dining table set is designed for comfortable and functional use in various settings.

• Seating Capacity: The 63-inch rectangular table comfortably accommodates 6 to 8 people.
• Weight Capacity: The table has a weight capacity of 330 lbs (150 kg). Each chair has a weight capacity of 330 lbs (150 kg). Do not exceed these limits.
• Space-Saving Design: The armless chairs are designed to tuck neatly under the table when not in use, optimizing space in smaller areas.
• Ergonomic Comfort: The chairs feature curved high-backs for ergonomic support and tilted seats to relax legs during extended sitting.

5. Care and Maintenance

Proper care will extend the life and appearance of your dining set.

• Cleaning Surfaces: The smooth surfaces of the table (E0-grade particleboard with melamine lamination) and chairs (faux leather) can be wiped clean effortlessly with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
• Spill Management: Immediately wipe up spills to prevent staining, especially on the faux leather upholstery.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading or damage to the materials.
• Heat Protection: Use placemats or coasters to protect the table surface from hot dishes and moisture.
• Regular Inspection: Periodically check all bolts and screws for tightness and retighten as needed to maintain stability.

6. Troubleshooting

If you encounter any issues with your dining set, refer to the following common problems and solutions.

6.1 Table or Chairs are Wobbly

• Solution: Check all assembly bolts and screws. Loosen them slightly, gently rock the furniture on a level surface to allow it to settle, then retighten all fasteners evenly and firmly. Ensure the floor surface is level.

6.2 Scratches on Surfaces

• Prevention: Always lift items rather than dragging them across the table surface. Use protective pads under decorative items.
• Solution: For minor scratches, furniture polish or repair kits designed for engineered wood may help.

6.3 Difficulty Assembling Parts

• Solution: Re-read the assembly instructions carefully. Ensure you are using the correct hardware for each step. Do not force parts together; if they don't fit, recheck alignment and orientation.

7. Specifications

8. Customer Support

For any questions, missing parts, or assistance with assembly or product use, please contact SILKYDRY customer support.

Please have your model number (SK-KC57825DK+KC54184) and purchase information ready when contacting support.

You can visit the SILKYDRY Store on Amazon for more information and contact options.