COSTWAY Vanity Desk with Mirror and Lights (Model: 1092486US-CYHU)

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your COSTWAY Vanity Desk with Mirror and Lights. Please read this guide thoroughly before beginning assembly or use to ensure safe and correct operation. Keep this manual for future reference.

Image: The COSTWAY Vanity Desk with Mirror and Lights, showcasing its farmhouse design and integrated mirror.

Important Safety Information

WARNING: This product contains electrical components. Always unplug the product before assembly, disassembly, or cleaning. Keep electrical cords away from heat sources and liquids. This product may have sharp edges or pinch points. Always use caution when handling. This product is heavy (99.5 pounds). Always use two people for assembly and disassembly to avoid injury.

Package Contents

Before assembly, please verify that all parts and hardware listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer service.

Parts List:

• Top Panel
• Back Panel
• Side Panels
• Drawer Fronts
• Drawer Sides
• Drawer Backs
• Drawer Bottoms
• Shelf Panels
• Mirror Assembly

Hardware List:

• Various Screws and Wooden Dowels
• Knobs
• Drawer Slides
• Hinges
• Mirror Track and Hangers
• Power Strip
• Hair Dryer Holder
• Power Adapter
• Wall Anchors and Cable Ties

Image: Diagram showing the overall product dimensions and individual component sizes for reference during assembly.

Assembly Instructions

Follow these step-by-step instructions carefully. It is recommended to have two people for assembly due to the product's weight and size. A detailed assembly video is also available for visual guidance.

Assembly Video Guide:

Step-by-Step Written Instructions:

1. Assemble Base Cabinets

Begin by attaching the drawer slides to the designated side panels (parts 3, 4, 5, 6) using the provided screws (F, A). Then, connect these side panels with the bottom panels (parts 10, 11) using wooden dowels (C) and screws (B) to form the left and right base cabinets.

Image: Illustration showing the initial assembly of the base cabinets, including the attachment of drawer slides.

2. Assemble Upper Shelf Unit

Construct the internal shelf grid using panels (14, 15, 16, 17, 18, 19, 20) and secure them with wooden dowels (L) and screws (B). Attach the back panel (40) to this grid using screws (Q). Finally, place and secure the top panel (1) to complete the upper shelf unit using wooden dowels (C) and screws (V).

Image: The upper shelf unit with multiple compartments, demonstrating the diverse storage options.

3. Connect Main Structures

Carefully lift the assembled upper shelf unit and align it with the left and right base cabinets. Secure the entire structure together using screws (B) and wooden dowels (C) to form the complete vanity desk frame. Ensure all connections are tight and stable.

Image: The vanity desk with the upper shelf unit securely attached to the lower base cabinets, forming the main structure.

4. Assemble and Install Drawers

Assemble all drawers (small and large) using the respective side, front, back, and bottom panels (22, 23, 24, 25, 26, 27, 28, 29, 33, 34). Use screws (D, B) and wooden dowels (C) for construction. Attach the drawer slides (DL, DR) to the sides of each drawer using screws (F). Finally, install the knobs (E) with screws (K) onto the drawer fronts and carefully slide the completed drawers into their designated slots in the vanity.

Image: The vanity desk with all drawers assembled and inserted, showcasing the functional storage.

5. Install Cabinet Door and Adjustable Shelves

Attach the hinges (S) to the cabinet door (13) using screws (F), then mount the door to the right cabinet section of the vanity. Install the handle (W) using screws (Z). Insert the shelf pins (X) into the desired holes within the cabinet and shelf sections, then place the adjustable shelves (12) onto the pins.

Image: The vanity desk with the cabinet door and adjustable shelves in place, highlighting the farmhouse design elements.

6. Install Mirror, Power, and Accessories

Attach the mirror track (T) to the top of the upper shelf unit. Secure the mirror hangers (U) to the mirror assembly (21) and carefully hang the mirror onto the track. Insert the power strip (H) into its cutout and secure it with screws (F). Attach the hair dryer holder (I) to the side panel using screws (F). Connect the mirror's power cable to the power adapter (G) and use cable ties (M) and wall anchors (N) to manage cables and secure the vanity to the wall for anti-toppling safety.

Image: The vanity desk with the sliding mirror, power strip, and hair dryer holder fully installed, ready for use.

Operating Instructions

LED Lighted Mirror:

• Power On/Off: Touch the power icon on the mirror surface to turn the LED lights on or off.
• Adjust Brightness: Press and hold the power icon to adjust the brightness level. Release when the desired brightness is achieved.
• Change Lighting Color: Briefly touch the color temperature icon (or cycle through by tapping the power button if it's a single button control) to switch between Warm Yellow, Warm White, and Cool White lighting modes.
• Sliding Mirror: Gently slide the mirror panel left or right along its track to access the storage shelves behind it.

Image: The LED mirror displaying its three lighting color options (Warm Yellow, Warm White, Cool White) and touch control for brightness adjustment.

Built-in Charging Station:

• The vanity desk includes a built-in charging station with 2 AC outlets (125V/12A) and 2 USB ports (5V/2.4A).
• Plug your electronic devices into the appropriate outlets or USB ports for convenient charging.
• Always ensure the vanity is plugged into a functional wall outlet.

Maintenance

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish. For the mirror, use a glass cleaner and a lint-free cloth.
• Dusting: Regularly dust all surfaces to prevent buildup.
• Electrical Components: Ensure all electrical connections are secure. If any part of the electrical system is damaged, discontinue use and contact a qualified technician.
• Hardware: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.
• Drawer Slides: If drawers become stiff, apply a small amount of silicone-based lubricant to the drawer slides.

Troubleshooting

Specifications

Warranty and Customer Support

For warranty information, replacement parts, or customer support, please refer to the contact details provided with your purchase or visit the official COSTWAY website. Please have your model number (1092486US-CYHU) and purchase date available when contacting support.