1. Product Overview
The Roroom Corner Tavern AW03-001 is a DIY miniature dollhouse kit designed for assembly. This kit allows users to construct a detailed miniature model of a corner tavern, complete with furniture, LED lights, and various decorative elements. It is intended for individuals aged 14 years and older.
Image 1.1: Fully assembled Roroom Corner Tavern miniature dollhouse kit, showcasing its intricate details and overall design.
2. Safety Information
This product contains small parts and is not suitable for persons under 14 years of age due to potential choking hazards and the complexity of assembly. Adult supervision is recommended for younger users who meet the age requirement.
3. What's Included
The Roroom Corner Tavern AW03-001 kit includes all necessary components for assembly as pictured, along with English instructions. Additionally, a music movement and a dust-proof cover are provided.
- Pre-cut wooden board pieces for structure and furniture.
- Paper and plastic components for details and decorations.
- LED lighting components.
- Music movement.
- Dust-proof cover.
- English instruction manual.
Note: Silicone liquid glue and 2 AAA batteries are not included and must be prepared separately by the user, as they are prohibited from air transportation.
4. Assembly Instructions
Assembly of the Roroom Corner Tavern AW03-001 requires patience and attention to detail. Follow the English instructions step-by-step. Components are numbered for easier identification and placement.
4.1. Preparation
- Unpack all components and verify against the parts list in the manual.
- Gather necessary tools: silicone liquid glue, 2 AAA batteries, scissors, an exacto knife, and a pencil. Tweezers may also be helpful for small parts.
- Ensure a clean, well-lit workspace.
4.2. Step-by-Step Assembly
- Begin by identifying the main structural pieces. These are typically larger wooden boards.
- Follow the numbered sequence in the instruction manual to attach pieces using silicone liquid glue. Allow adequate drying time for each section before proceeding.
- Assemble miniature furniture and decorative items as instructed. Pay close attention to the details for accurate placement.
- Install the LED lighting system. Ensure all wires are correctly connected according to the diagram in the manual.
- Integrate the music movement into the designated area.
- Complete the exterior details, including the street lamp and signage.
Image 4.1: Overview of the kit components and estimated assembly time (3-4 hours) for individuals aged 14+.
Image 4.2: Close-up of the assembled dollhouse showing the touch switch for lights and the battery compartment location.
Video 4.3: An official Roroom video demonstrating the assembly process and showcasing the finished Corner Tavern dollhouse, including details of the interior and lighting.
5. Operating Instructions
5.1. LED Lights
- Ensure 2 AAA batteries are correctly installed in the battery compartment (refer to Image 4.2 for location).
- Locate the touch switch, typically integrated into the top or side of the dollhouse structure.
- Gently touch the switch to turn the LED lights on or off.
5.2. Music Movement
The music movement is manually operated. Locate the winding key or mechanism, typically on the underside or back of the dollhouse, and turn it gently to activate the music.
6. Maintenance
6.1. Cleaning
- Use a soft, dry cloth or a small brush to gently remove dust from the miniature components.
- Avoid using liquid cleaners or abrasive materials, as they may damage the delicate parts and finishes.
6.2. Dust Protection
After assembly, place the provided dust-proof cover over the dollhouse to protect it from dust accumulation and maintain its appearance.
6.3. Battery Replacement
When the LED lights dim or stop working, replace the 2 AAA batteries in the designated compartment. Ensure correct polarity during installation.
7. Troubleshooting
If you encounter issues during assembly or operation, refer to the following common solutions:
- Missing or Damaged Parts: The kits are inspected before delivery. If any parts are missing or damaged upon arrival, please contact Roroom customer support immediately for assistance.
- Lights Not Working:
- Check if batteries are installed correctly with the right polarity.
- Ensure batteries are fresh and not depleted.
- Verify all wiring connections are secure and match the diagram in the manual.
- Confirm the touch switch is functioning by gently pressing it.
- Difficulty Assembling Small Parts: Use tweezers for precision. Apply glue sparingly to avoid excess. Allow sufficient drying time.
- Instructions Unclear: Review the English instruction manual carefully. If a specific step remains unclear, refer to the product video (Video 4.3) for visual guidance or contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Corner Tavern |
| Product Model | AW03-001 |
| Finished Size (L x W x H) | 9.06 x 5.91 x 5.91 inches (23 x 15 x 15 cm) |
| Item Weight | 2.73 pounds (1.24 kg) |
| Material | Wood, Paper, Plastic |
| Recommended Age | 14 years and up |
| Assembly Time (Estimated) | 3-4 hours |
| Power Source for Lights | 2 AAA Batteries (not included) |
Image 8.1: Product data including finished size, material, model number, and suitable age.
9. Warranty and Support
Roroom ensures that all kits are carefully inspected before delivery to confirm completeness and absence of missing parts. If you have any questions during assembly or encounter any issues, please feel free to contact Roroom customer support. We are committed to resolving any problems promptly.
10. Additional Product Views
Image 10.1: Product information highlighting skills developed during assembly, such as touch switch operation, hand-eye coordination, logical thinking, and manual assembly.
Image 10.2: The assembled dollhouse being presented as a special gift, emphasizing its decorative appeal.