Snrigw RF370E CU358-2

Snrigw Universal Replacement Remote for Adjustable Bed Bases

Model: RF370E CU358-2 | Brand: Snrigw

Introduction

This manual provides instructions for the setup, operation, and maintenance of your Snrigw Universal Replacement Remote, model RF370E CU358-2. This remote is designed for compatibility with various adjustable bed bases, including models from OKIN, Simmons, Beautyrest, Aireloom, and Snooze, offering control over head/feet positioning, massage functions, zero-gravity presets, and memory settings.

Snrigw Universal Remote with an adjustable bed in the background, illustrating universal compatibility.

Image: The remote control is compatible with a wide range of adjustable bed bases.

The remote features a high-performance chip for quick response and reliable operation, ensuring a seamless experience with your adjustable bed system.

Diagram showing a high-performance chip with quick response capabilities.

Image: Internal components highlighting the high-performance chip for quick response.

Setup

1. Battery Installation

The remote requires two AAA batteries (not included). Please ensure batteries are installed correctly according to polarity markings inside the battery compartment.

Image showing the remote control and two AAA batteries, indicating that batteries are not included and require additional purchase.

Image: The remote requires two AAA batteries, which are not included with the product.

2. Pairing Instructions

To pair your remote with the adjustable bed base, follow these steps:

  1. Step 1: Unplug the power cord from your adjustable bed's power outlet. Wait for 1 minute, then plug it back into the power outlet.
  2. Step 2: Within 10 seconds of plugging in the power cord (while the control box light is flashing), press and hold the PAIR button on the back of the remote. The PAIR button will illuminate and start to flash.
  3. Step 3: Release the PAIR button when it stops flashing, and the LED light on the control box also stops flashing.
  4. Step 4: The remote is now paired to the adjustable base. Test all remote functions. If the remote buttons do not impact the adjustable base movements, please repeat the pairing process.
Diagram illustrating two methods for pairing the remote control with an adjustable bed base, including steps for power cycling and pressing the pair button.

Image: Visual guide for pairing the remote control with the adjustable bed base.

Operating Instructions

The remote features clearly labeled buttons for intuitive control of your adjustable bed's functions. It offers a strong signal transmission up to 30 feet.

Close-up of the remote control highlighting sensitive and durable buttons for various functions.

Image: The remote features sensitive and durable buttons for reliable operation.

Key functions include:

  • Head/Feet Adjustment: Independent control for raising and lowering the head and foot sections of the bed.
  • Massage Functions: Activate and adjust variable massage intensity.
  • Zero-Gravity Preset: One-touch button for the zero-gravity position.
  • Memory Settings: Store and recall your preferred bed positions.
  • Flashlight Feature: Built-in light for convenience in low-light conditions.
Image showing the remote control operating an adjustable bed from a distance, indicating a strong wireless range of up to 26 feet.

Image: The remote provides stable signal transmission with a wireless range of up to 26 feet.

Maintenance

Battery Replacement

When the remote's performance degrades or the indicator light does not respond, it is time to replace the two AAA batteries. Refer to the "Battery Installation" section under Setup for proper replacement.

Cleaning

To clean the remote, use a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these may damage the remote's surface or internal components.

Troubleshooting

  • Remote not responding:
    • Check the battery before operation. Ensure batteries are fresh and correctly installed.
    • Check if the child lock function is turned on. The remote cannot be operated normally when child lock is active.
    • If pairing fails, disconnect the device from the power supply for 1 minute and try the pairing process again.
  • Intermittent signal: Ensure there are no obstructions between the remote and the bed base's receiver. The maximum effective range is approximately 30 feet.

Specifications

FeatureDetail
BrandSnrigw
Model NumberRF370E CU358-2 (ASIN: B0FPCQC3K2)
Special FeatureErgonomic Design
ColorBlack
Compatible DevicesAdjustable Bed Bases (OKIN, Simmons, Beautyrest, Aireloom, Snooze)
Connectivity TechnologyInfrared
Button Quantity10
Controller TypeButton Control
Maximum Range30 feet
Item Dimensions (L x W x H)7.2"L x 2"W x 0.98"H
Power Source2 x AAA Batteries (not included)

Warranty Information

Specific warranty details for this product are not provided in the available information. Please refer to the product packaging or contact the manufacturer directly for warranty terms and conditions.

Customer Support

For further assistance, troubleshooting, or inquiries regarding your Snrigw Universal Replacement Remote, please contact Snrigw customer support through their official website or the retailer where the product was purchased.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.